Abstract:High-speed permanent magnet synchronous motors (PMSMs) are usually started with the hybrid low-speed open-loop and high-speed closed-loop control mode. However, low-speed open-loop control produces large starting current, or even current overload, resulting in demagnetization and motor damage. Therefore, there is an urgent need to develop a high-speed permanent magnet synchronous motor with self-starting ability at low speed, that is, a permanent magnet hysteresis motor (PMHM). This paper takes the permanent magnet ring hysteresis column rotor structure as the research object. Firstly, the performance of this type of rotor is improved using the micro level of effective layer material AlNiCo, and the mechanical properties of AlNiCo are calculated. Secondly, based on the thick-walled cylinder theory, the analytical model for calculating the strength of the composite rotor considering the temperature effect is deduced, and the tangential and radial stress distribution for each part of the rotor under no-load and load conditions are obtained. Then, the electromagnetic losses and temperature field distribution of the rotor are obtained using the magneto-thermal bidirectional coupling finite element method. Finally, strength of the thermal rotor is analyzed by substituting the temperature rise curve function and AlNiCo parameters at the operating temperature. The comparison of the stress calculation results of the semi-analytical solution and the finite element method showed that the error between both of them is less than 5%, which verified that the semi-analytical solution can accurately analyze the thermal stress distribution of the rotor during high-speed rotation.

A New Miniaturized Engine Based on Thermomagnetic Effect of Magnetic Fluids

Thermal Analysis of a Permanent Magnet Generator with Built-in Hydrostatic Drive

Spinning a Liquid Wheel and Driving Surface Thermomagnetic Convection with Light

A Hybrid Interior Permanent Magnet Variable Flux Memory Machine Using Two-Part Rotor

A Miniature Permanent Magnet Linear DC Motor

Investigation on Operational Characteristics of a Miniature Automatic Cooling Device

Liquid metal hydraulic actuation and thermal management based on rotating permanent magnets driven centrifugal pump

Power generation by a thermomagnetic engine by hybrid operation of an electromagnetic generator and a triboelectric nanogenerator

Design and experimental study of Tesla's thermomagnetic engine

Brownian magneto-gyrator as a tunable microengine

Analysis of the Magneto-Thermal Bidirectional Coupling Strength of Macro and Micro Integration for Self-Starting Permanent Magnet Hysteresis Synchronous Motors

A Multi-engine Marangoni Rotor with Controlled Motion for Mini-Generator Application

A Double-Rotating Ferrofluid Vane Micropump with an Embedded Fixed Magnet

Dual-rotor Electromagnetic Heat Engine and Its Magnetic Field and Eddy Current Analysis

Engine Cooling Device of New Energy Vehicle

A novel magnetic-thermal coupling model considering air thermophysical properties for temperature rise and performance analysis of hub motor

Thermal Analysis of Axial-Flux Permanent Magnet Motors for Vehicles Based on Fast Two-Way Magneto-Thermal Coupling

Microscopic Engine Powered by Critical Demixing

High-performance Marangoni hydrogel rotors with asymmetric porosity and drag reduction profile

Design Optimization of a Rotary Thermomagnetic Motor for More Efficient Heat Energy Harvesting