Abstract:Mixed-radix fast Fourier transform (FFT) algorithms are widely adopted in high-performance communication systems, such as 5G systems. However, in the decimation-in-time (DIT) FFT algorithm, neither the input time-domain series nor the intermediate-stage data are fetched in natural order, which causes a mismatch between the processing element (PE) computation speed and the memory bandwidth. In addition, multiple duplicate interstage twiddle factor (TF) generation units are designed to provide interstage TFs in parallel, and such duplication results in considerable waste of computing and storage resources. In this article, we propose a flexible and reconfigurable architecture based on a mixed-radix FFT approach, supporting 61 different FFT sizes modes from 12 to 3240 points ( $2^{\alpha }$ or $12\times n$ , $n \le270$ , and $n$ = $2^{\alpha } 3^{\beta } 5^{\gamma }$ ). A DIT-FFT-based multiple parallel changeable-radix butterfly unit (BU) is designed to improve hardware resource utilization. Around the PE array, a conflict-free access structure with a hardware-friendly address generating method is presented. In addition, a TF sharing and compression structure is designed to reduce the area and delay of the TF generation units. The FFT architecture is implemented in semiconductor manufacturing international corporation (SMIC) 40-nm CMOS technology with a working frequency of 483 MHz, performing at 654 MS/s for 2048-point and 1536-point FFTs. Compared to the state-of-the-art mixed-radix FFT designs, our architecture achieves improvements of up to $5.89\times $ in throughput and area efficiency and supports more FFT modes.

Reduced Memory Architecture for CORDIC-based FFT

An Efficient FPGA Architecture for Reconfigurable FFT Processor Incorporating an Integration of an Improved CORDIC and Radix-2r Algorithm

FPGA implementation of high-performance, resource-efficient Radix-16 CORDIC rotator based FFT algorithm

Implementation of FPGA design of FFT architecture based on CORDIC algorithm

Low-cost Reconfigurable VLSI Architecture for Fast Fourier Transform

FPGA IMPLEMENTATION OF AN FFT PROCESSOR USING CORDIC ALGORITHM

An Efficient SIMD Parallel Memory Structure for Radix-2 FFT Computation

A Low-Power Twiddle Factor Addressing Architecture for Split-Radix FFT Processor.

An Area- and Energy-Efficient Hybrid Architecture for Floating-Point FFT Computations.

A Reconfigurable Floating-Point Fft Architecture

An Optimized Hardware Implementation of the CORDIC Algorithm.

An efficient floating-point FFT twiddle factor implementation based on adaptive angle recoding CORDIC algorithm

A pipelined architecture for normal I/O order FFT

A High-Throughput and Flexible Architecture Based on a Reconfigurable Mixed-Radix FFT with Twiddle Factor Compression and Conflict-Free Access

FPGA implementation of short critical path CORDIC-based approximation of the eight-point DCT

Implementation Method of CORDIC Algorithm to Improve DDFS Performance

A Combined SDC-SDF Architecture for Normal I/O Pipelined Radix-2 FFT

An Improved Fft Architecture Optimized for Reconfigurable Application Specified Processor

A Decision-Based CORDIC Hardware for Arc Tangent Calculation

A Low-Latency CORDIC Algorithm Based on Pre-Rotation and Its Application on Computation of Arctangent Function

A pipelined area-efficient and high-speed reconfigurable processor for floating-point FFT/IFFT and DCT/IDCT computations.