Abstract:The commercial Amberlite XAD-4 resin was post-crosslinked by two crosslinking reagents, α,α′-dichloro-p-xylene (DCX) and 4,4′-bis(chloromethyl)-1,1′-biphenyl (BCMBP) through the Friedel–Crafts reaction and two post-crosslinked resins named DCX and BCMBP modified resins were prepared in this study. Characterization of the two modified resins indicated that DCX and BCMBP were connected on the surface of XAD-4 successfully and the pore diameter distribution of the modified resins was transferred from 2 to 14nm (XAD-4) to a narrower micro/mesopore region (1–9nm) and a large amounts of micropores were emerged for the two modified resins. Phenol adsorption experiments showed that the equilibrium adsorption capacity on the two modified resins was greatly enhanced due to emergence of the large number of micropores and the equilibrium adsorption isotherms could be well fitted by the Freundlich equation. The surface energy heterogeneity of the resins could be described as a function of the isosteric adsorption enthalpy and the tested three resins exhibited different surface energetic heterogeneity patterns. Both of the pseudo-first-order and pseudo-second-order rate equations could characterize the kinetic data of phenol adsorption on XAD-4 while only the pseudo-second-order rate equation was appropriate for the modified resins and the micropore diffusion models could describe the kinetic data on the modified resins rather than XAD-4. The dynamic adsorption capacity of phenol on XAD-4, DCX and BCMBP modified XAD-4 resins were predicted to be 80.6, 97.5 and 127.0mg/g dry resin, respectively, which were very close to the equilibrium adsorption capacity in the batch experiments and the resin column could be completely recovered by less than 7 BV of 75% of ethanol aqueous solution (w/v).

IMPROVEMENT AND CHARACTERIZATION OF THE ADSORPTION CAPACITY OF MACROPOROUS RESIN IN OIL SYSTEM

Designed modification on macroporous resin for extracting sesamin from sesame oil

Synthesis of high oil-adsorption copolymer

Synthesis of a novel oil-absorption resin and optimization of its performance parameters using response surface design

Enhancing the adsorption property of macroporous XAD‐2 resin by nanosecond‐pulsed discharge plasma modification

MECHANISM OF ADSORPTION FOR AROMATIC ORGANICS ONTO HYPERCROSSLINKED ADSORPTION RESINS

Kinetics and Equilibrium Adsorption Studies of Dimethylamine (DMA) Onto Ion-Exchange Resin

Study on Property and Mechanism of Adsorption of Chlorogenic Acids by Zinc-Containing D401 Macroporous Resin

Application of an Easily Water-Compatible Hypercrosslinked Polymeric Adsorbent for Efficient Removal of Catechol and Resorcinol in Aqueous Solution.

THERMODYNAMIC STUDY AND MECHANISM OF ADSORPTION FOR PHENOLIC COMPOUNDS WITH HYPERCROSSLINKED RESIN

Study on absorption behavior of oil-absorption resin

Synthesis, Characterization and Adsorption Performance of a Novel Post-Crosslinked Adsorbent

DESIGN OF FUNCTIONAL GROUPS MODIFIED INTO ADSORPTION RESINS AND INVESTIGATION OF THEIR ADSORPTION MECHANISM

Surface Chemical Modification on Hyper-Cross-linked Resin by Hydrophilic Carbonyl and Hydroxyl Groups to Be Employed As a Polymeric Adsorbent for Adsorption of P-Aminobenzoic Acid from Aqueous Solution

Adsorption of aromatic acids on an aminated hypercrosslinked macroporous polymer

ADSORPTION OF 1,2-BENZISOTHIAZOLIN-3-ONE WITH CHEMICALLY-MODIFIED MACROPOROUS ADSORPTION RESINS

In-depth Investigation on the Factors Affecting the Performance of High Oil-Absorption Resin by Response Surface Method

Phenol Adsorption on Α,α′-Dichloro-p-xylene (DCX) and 4,4′-Bis(chloromethyl)-1,1′-biphenyl (BCMBP) Modified XAD-4 Resins from Aqueous Solutions

THE STUDY OF ADSORPTION OF PHENOL AND ANILINE ON AMINATED-MACROPOROUS HYPERCROSSLINKED RESINS

PREPARATION OF A POST-CROSSLINKED MACRORETICULAR RESIN ADSORBENT AND ITS ADSORPTION PERFORMANCE ON PHENOL AND VB12

Prediction of the Sorption Capacities and Affinities of Organic Chemicals by XAD-7.