The Characteristic of Plasma Torch Designed for the Very Low-Pressure Plasma Spraying

Gao Yang,Yang De-ming

DOI: https://doi.org/10.3969/j.issn.1674-7127.2011.03.014

2011-01-01

Abstract:In contrast with the atmosphere plasma spraying(APS),the very low pressure plasma spraying(VLPPS) exhibited lower heating ability for the feed materials at plasma free region exit of nozzle.Most very low pressure plasma spraying at the present usually are adopted a high power plasma gun which operated at great arc currents up to 2500A to remedy a lower heating ability,thus result in a series problems not only for the plasma torch but also for associated facility.According to the characteristic of plasma spray in the low pressure environment we designed a plasma torch with separating anode and nozzle,and the powder injected to the plasma jets is from inside nozzle intake.In this study,the pressures in the plasma gases intake,nozzle intake and out of the plasma torch were measured by enthalpy probe,respectively.For the practice,SUS 316 stainless steel coatings were prepared at plasma currents of 500-600A and arc voltage of 50V and the chamber pressure of 1000 Pa,the results indicated that the coatings with the equiaxed microstructure could deposited in the appropriate conditions.