Abstract:Supercapacitors have been regarded as one of the next-generation energy storage devices because of the high power density, excellent cycling performance, long lifespan and easy maintenance. However, its relatively low specific energy hinders its application in the future. Recently, Na-ion based aqueous hybrid supercapacitors have attracted worldwide attention due to its high energy density, environment friendly and low cost. In our work, the Na-ion aqueous hybrid supercapacitor is constructed with NaTi2(PO4)(3)/C and commercial activated carbon as electrode materials. NaTi2(PO4)(3)/C nanoparticles with the size of about 40 nm were synthesized by high-temperature solid state reaction method using the NaTi2(PO4)(3)/C precursor that was prepared through the solution method with Ti(C4H9O)(4), NH4H2PO4, Na2CO3 as the raw materials, and citric acid as the carbon source. The electrochemical tests were performed using 1 mol.L-1 Na2SO4 solution as the electrolyte. The carbon-coated NaTi2(PO4)(3) electrode delivers the discharge capacity of 122 mAh.g(-1) and shows an excellent cycling stability with the retention of 60% of the initial capacity after 1000 cycles at a 10C rate. The supercapacitor was consisted of NaTi2(PO4)(3)/C anode, AC cathode and 1 mol.L-1 Na2SO4 electrolyte. And the weight ratio of active materials in cathode and anode was 2.2. Cyclic voltammetry, galvanostatic test were employed to study the electrochemical properties of the supercapacitor. The as-fabricated device was then cycled between 0.15 similar to 1.4 V with different current density. Our results show the power density of 121.15 W.kg(-1) with specific energy of 18.71 Wh.kg(-1) at the current density of 0.5 A.g(-1). Moreover, the specific energy and power density goes to 14.13 Wh.kg(-1) and 2.42 kW.kg(-1) at a higher current density of 10 A.g(-1). More importantly, the device showed an excellent cycling stability with the retention of 76% after 1000 cycles at a current density of 1 A.g(-1). This research shows the designed hybrid supercapacitor has the potential to be used as auxiliary high-power energy storage device for the practical applications.

The Performance of Carbon Nanotubes Based Supercapacitor and Application in GSM Portable Communication

The Performance of 600f Power Super Capacitor Using Carbon Nanotubes Electrodes and Nonaqueous Electrolyte

Introduction of new techniques for installation of carbon nano-tubes super capacitor

Research on 20 Voltage Carbon Nanotubes Based Supercapacitor

High-performance supercapacitors based on nanocomposites of Nb 2O 5 nanocrystals and carbon nanotubes

Nitrogen, Boron and Fluorine Tri-Doped Carbon Nanotubes on Carbon Cloth As the Electrode Materials for Supercapacitors

High-performance VO2/CNT@PANI with core-shell construction enable printable in-planar symmetric supercapacitors

Improved supercapacitors by implanting ultra-long single-walled carbon nanotubes into manganese oxide domains

A Solid-State Fibriform Supercapacitor Boosted by Host-Guest Hybridization between the Carbon Nanotube Scaffold and MXene Nanosheets.

Study on the Aqueous Hybrid Supercapacitor Based on Carbon-coated NaTi2(PO4)3 and Activated Carbon Electrode Materials

High-Performance Supercapacitors Based on Graphene/Activated Carbon Hybrid Electrodes Prepared Via Dry Processing

Nanocomposite Electrodes for High-Performance Supercapacitors

Carbon Nanomaterials‐Enabled High‐Performance Supercapacitors: A Review

Activated Carbon Modified by CNTs/Ni-Co Oxide As Hybrid Electrode Materials for High Performance Supercapacitors

Trial Producing the Supercapacitor with Activated Carbon Fiber Electrode

Boosting the supercapacitor performances of activated carbon with carbon nanomaterials

Electrochemical Capacitance Performance of Hybrid Supercapacitors Based on Ni(OH)[sub 2]∕carbon Nanotube Composites and Activated Carbon

Electrochemical Performance Of Combined Ni(Oh)(2)/Carbon Nanotubes(Cnts) Composite-Activated Carbon Supercapacitor

High-performance Compressible Supercapacitors Based on Functionally Synergic Multiscale Carbon Composite Textiles

Carbon nanotubes and manganese oxide hybrid nanostructures as high performance fiber supercapacitors

Ultrahigh power graphene based supercapacitor