Abstract:Reinforcing steel corrosion in concrete is a main reason for the deterioration of durability of reinforced concrete structures. The widespread corrosion of reinforcing steel caused by chloride ions is a common and serious problem all over the world. Obviously, corrosion protection of reinforcing steel in concrete has become an urgent and important task. The use of corrosion inhibitors is one of the promising protection methods for controlling steel corrosion in concrete because of their low cost and easy application. The development and application of surfactant corrosion inhibitors have drawn special attention. Many surfactants have inviting application prospects for the corrosion protection of metals. Cetyltrimethylammonium bromide (CTMAB), a cationic surface active agent, has been studied for metal corrosion protection due to its main advantages of non-toxicity and a popular price. Nevertheless, there is little information on CTMAB as a corrosion inhibitor for steel in concrete. In this work, the surfactant CTMAB was employed as a corrosion inhibitor and its inhibition performance against reinforcing steel corrosion in the simulated concrete pore solutions was studied by electrochemical measurements and surface analyses. The cylindrical specimens with Ø11.2 mm × 4 mm were cut from a Q235 reinforcing steel bar. The specimen mounted in epoxy resin was used as the working electrode with an exposed area of 1.00 cm 2 during electrochemical measurements, and a platinum sheet and a saturated calomel electrode (SEC) served as the auxiliary electrode and the reference electrode, respectively. The compositions of the specimens were analyzed by X-ray energy dispersive spectroscopy (EDS), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS), and their morphologies were observed by scanning electron microscopy (SEM). A saturated Ca(OH) 2 solution with pH about 12.50 was selected as a simulated concrete pore solution. After the solution was adjusted to pH 11.00 with a 0.8 mol/L NaHCO 3 solution and 0.5 M NaCl was added, it served as a simulated polluted concrete pore (SPCP) solution, namely a test solution. Then different concentrations of CTMAB were added to the SPCP solution to investigate the corrosion inhibition effect of CTMAB on the reinforcing steel. The EIS analysis of the steel in the SPCP solution showed the capacitive reactance arc size increased gradually while the CTMAB concentration was increased from 0 to 0.005 M, then decreased with the increasing of the CTMAB concentration from 0.005 to 0.1 M. When the CTMAB concentration was 0.005 M, the interfacial charge transfer resistance ( R ct ) of the steel reached a maximum of 41.17 kΩ cm 2 , and the inhibition efficiency of CTMAB was 79.9%. The inhibition efficiency of CTMAB determined from the polarization curve of the steel in the SPCP solution with 0.005 M CTMAB reached 87.6%, indicating that the CTMAB could inhibit corrosion of reinforcing steel effectively. For the SPCP solution without CTMAB there was not a passive region on the potentiodynamic anodic polarization curve of the steel, indicating that the steel corrosion took place. However, the steel was in a passive state for the solution with 0.005 M CTMAB. The SEM results also indicated that CTMAB could protect the steel from corrosion. XPS and Raman results proved that CTMAB was an adsorption type corrosion inhibitor. The adsorbed CTMAB resulted in the formation of a protective film on the steel surface to protect the steel from corrosion.

The Performance of MEPB-16 as Corrosion Inhibitor for X70 Steel in 5M HCl

Synthesis of N-alkyl-4-(4-hydroxybut-2-ynyl) pyridinium bromides and their corrosion inhibition activities on X70 steel in 5M HCl

Synergic Effect of Methyl Acrylate and N-cetylpyridinium Bromide in N-cetyl-3-(2-methoxycarbonylvinyl)pyridinium Bromide Molecule for X70 Steel Protection

Enhanced anticorrosion of methyl acrylate by covalent bonded N-alkylpyridinium bromide for X70 steel in 5M HCl

Passivation and Depassivation of HPB335 Carbon Steel in Simulated Concrete Pore Solution

Experimental Study of Poly(1‐Acetamide‐3‐vinylimidazolium Bromide) As a Corrosion Inhibitor for N80 Carbon Steel in HCl

Influence of N2, N6-bis((3,5-dimethyl-1h-pyrazol-1-yl)methyl) pyridine-2,6-diamine on C35E steel corrosion in 1 M HCl medium: Experimental and theoretical studies

Electrochemical, Surface Analysis, and Theoretical Investigation of 3-Hydroxy-5-(phenylamino)-4-(p-tolyldiazenyl)thiophen-2-yl)(phenyl)methanone As a Corrosion Inhibitor for Carbon Steel in a Molar Hydrochloric Acid Solution

Inhibition Effect of 1-vinyl-3-ethylimidazolium Bromide for X65 Steel in 0.5 M Sulfuric Acid Solution

Experimental and Theoretical Studies of the Corrosion Inhibition Performance of a Quaternary Phosphonium-Based Ionic Liquid for Mild Steel in HCl Medium

Self-Assembly and Anticorrosive Property of N -Alkyl-4-[2-(methoxycarbonyl)vinyl]pyridinium Bromides on X70 Steel in an Acid Medium: an Experimental and Theoretical Probe

Experimental and computational study of a multi-active-site Schiff base as corrosion inhibitor of mild steel in 1M HCl

Electrochemical, Structural and Thermodynamic Investigations of Methanolic Parsley Extract as a Green Corrosion Inhibitor for C37 Steel in HCl

Investigation on the Inhibition Behavior of a Pentaerythritol Glycoside for Carbon Steel in 3.5% NaCl Saturated Ca(OH)2 Solution

Corrosion Performance of Carbon Steel in Simulated Pore Solution in the Presence of Micelles

Inhibition of 1,2-Ethane-bis-(dimethyl Benzyl Ammonium Bromide) for Mild Steel Corrosion in Hydrochloric Acid Solution

Highly effective inhibition of mild steel corrosion in HCl solution by using pyrido[1,2-a]benzimidazoles

Development and potential performance of prepolymer in corrosion inhibition for carbon steel in 1.0 M HCl: Outlooks from experimental and computational investigations

Inhibition Performance of Cetyltrimethylammonium Bromide Against Reinforcing Steel Corrosion in Simulated Concrete Pore Solutions

Exploration of rigid double schiff base with a symmetrical plane as highly effective corrosion inhibitor for mild steel in hydrochloric acid environment: Experimental and theoretical approaches

Enhanced corrosion resistance of carbon steel in an aggressive environment by a recently developed pyrazole derivative: Electrochemical, SEM/XPS/AFM, and theoretical investigation