In-orbit thruster calibration techniques and experiment results with UoSAT-12

Shu-Fan Wu,Willem H. Steyn,Refaat E. Bordany
DOI: https://doi.org/10.1016/S0967-0661(02)00317-9
IF: 4.057
2004-01-01
Control Engineering Practice
Abstract:In this paper, two practical thrusters calibration approaches are proposed, discussed and evaluated through in-orbit flight tests. In the single thruster pulse method, one thruster is commanded to fire for a fixed period to produce a pulsed external torque disturbance. Reaction wheels are used to stabilize the satellite subject to the thruster firings. Magnetorquer coils are switched off during the experiment to reduce the external magnetic disturbances. A preliminary test without thruster firing is used to record the unmodelled external disturbances. The resulting satellite attitude responses and reaction wheel status subject to the thruster firings are recorded for calibration analyses. A batch filter algorithm is developed to estimate the thruster torque coefficients from the recorded experimental data. In the autonomous method, a repetitive torque disturbance (by using a reaction wheel) is exerted to the stabilized satellite, the cold-gas thrusters are then applied in an on-board control system to stabilize the satellite attitude. By recording the known attitude disturbances and the thruster controller outputs, a recursive least-squares algorithm is used to process the recorded data and to estimate the thruster parameters. Both simulation and in-orbit test results are presented to evaluate the performance and design objectives. The in-orbit test results converge to the same values using the two different approaches.
What problem does this paper attempt to address?