Research on the Factors Affecting the Lubrication and Frictional Characteristics of Piston Ring-liner Considering the Heat Conduction between Solid Walls
Zhou Long,Bai Minli,Lv Jizu,Liu Jiawei
DOI: https://doi.org/10.3969/j.issn.0254-0150.2008.01.008
2008-01-01
Abstract:Based on the transient heat conduction of solid components between piston assembly and liner,the in-cylinder gas,piston,piston ring,lubrication film,liner and coolant of diesel engine were simulated as a whole.A mathematical model to study the 3D transient thermal mixed lubrication and frictional performance of piston ring-liner was built by introducing both the 3D transient heat conduction model and the heat transfer model of lubrication film into the theory of hydrodynamic lubrication.The model was applied to the piston ring-liner of a 6110 diesel engine to carry out lubrication and frictional calculation.The influence of the surface roughness,the average benchmark pressure of piston ring was discussed.The calculation results show that the heat conduction between piston assembly and cylinder liner directly effects the temperature field of ring-liner,thus,it is the important factors which impact the lubrication and friction between piston ring and liner.With the increasing of average benchmark pressure of ring,the minimum film thickness becomes thinner,the oil film temperature increases,the oil film viscosity decreases,and the friction heat does not vary basically except for the increasing at the region near top dead center,which show it is necessary to carry out the 3D lubrication and frictional analysis for ring-liner.After increasing the surface roughness,the minimum film thickness,friction heat and temperature increase considerably,but the viscosity decreases accordingly.