Abstract:A simulation model using the first thermodynamic law is first proposed to estimate the performance of diffusion absorption heat transformer, which could potentially improve energy utilization efficiency and reduce CO2 emission. Thermodynamic analyses are performed to investigate the cycle performance when H2O is employed as refrigerant, LiBr as absorbent for H2O, R134a as diffusion gas and TEGDME as absorbent for R134a. Analyses aim to optimize system COP under specified temperature of two generators, two absorbers, evaporator and condenser, and compare the influence of the six temperatures on COP. The results under design conditions show that larger generation efficiency of R134a and smaller mass fraction of LiBr in H2O–LiBr solution are beneficial to COP improvement, but they are limited by the operating conditions. There is an optimal ratio of H2O–LiBr solution mass flow rate to R134a mass flow rate for an optimal COP, and the optimal ratio decreases with the increase of LiBr mass fraction in H2O–LiBr solution. The highest COP of 0.1701 is reached with the optimal ratio of 1.743. In addition, under design-off conditions, the temperatures of refrigerant generator and evaporator have the greatest influence on COP while the temperature of diffusion gas generator has the least influence. The diffusion absorption heat transformer will provide a new way to lift temperature of low grade heat without electricity input which can further improve the energy utilization efficiency and reduce the CO2 emission.

Performance investigation on double-lift LiBr absorption refrigerator in variable conditions

The Contrast Between the Water-Lithium Bromide-Lithium Nitrate and the Water-Lithium Bromide Absorption Refrigeration Cycle

Experimental Results of the Internal Process of A Double Inlet Pulse Tube Refrigerator

Investigation on A Two-Stage Ejection Refrigeration System

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Experimental Investigation On Dc Flow Control In A Single-Stage Pulse Tube Refrigerator Operating Below 20k

Experimental investigation on DC flow suppression and refrigeration characteristics of a high-performance single-stage GM-type

Preliminary study on the performance of the diffusion absorption refrigerator operating with the mixed refrigerant

STUDY ON LITHULM-BROMIDE AQUEOUS SOLIYTION AIR-PRECOOLED ADIABATIC ABSORPTION PROCESS

Theoretical Study of Dual-Heat Mode Operation of Double-Effect Parallel-Flow LiBr-H_2O Absorption Refrigeration System

A Numerical Investigation of A Diffusion Absorption Refrigerator Operating with the Binary Refrigerant for Low Temperature Applications

Investigations on Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Experimental Verification of the Variable Effect Absorption Refrigeration Cycle

Theoretical Investigations on the Cycle Performance of a Single-Pressure Diffusion Absorption Heat Transformer with LiBr–H2O-R134a-TEGDME

EXPERIMENTAL STUDY ON PERFORMANCES OF A NEW COMPRESSION-ABSORPTION HYBRID REFRIGERATION SYSTEM DRIVEN BY LOW-GRADE ENERGY

Investigations on the Cycle Performance of a Diffusion Absorption Heat Transformer Using HCOOK As an Alternative to LiBr

Experimental study of dynamic behavior on direct-fired lithium bromide absorption unit under non-standard working conditions

Experimental Study of Thermo-siphon Generator for Solar Energy LiBr Absorption Refrigerator

Absorption capability of non-pumped LiBr absorption chiller

Experimental Study on the Refrigeration Performance of Double-Effect and Double-Way Thermochemical Sorption Refrigeration Cycle

Thermodynamic and Economic Performance Assessment of Double-Effect Absorption Chiller Systems with Series and Parallel Connections