Abstract:In wireless power-saving protocols, one fundamental problem is when a station switches from an awake state to a doze state. The MoreData mechanism has been widely adopted in IEEE 802.11 standards to solve the problem. In this mechanism, when the access point (AP) transmits one buffered packet to a station, it will set the MoreData bit in the Frame Control field of the packet, to notify the station of either keeping awake (i.e., when MoreData = 1) for receiving additional packets or going to sleep (i.e., when MoreData = 0). Although important, few work studied the impact of this bit theoretically. It turns out that theoretically modeling the impact of this bit is by no means easy. Focusing on a polling system, this paper is the first to theoretically model the interaction between this bit setting and others (such as the sleeping interval) and make a trade-off analysis between power consumption and packet delay. Our results show that enabling this bit can reduce the power consumption remarkably, at the cost of slightly increasing the delay; and ignoring this bit might lead to significant analysis errors and inappropriate parameter settings. Extensive simulations verify that our model is very accurate for both homogeneous and heterogeneous settings. This study indicates that when the power-consumption is seriously concerned, we should enable this MoreData mechanism. Furthermore, it is very helpful to provide theoretically guided parameter settings for battery-powered applications.U

Queuing on Energy-Efficient Wireless Transmissions with Adaptive Modulation and Coding

Modeling the Impact of the MoreData Parameter for Wireless Power-Saving Protocols

Adaptive Modulation and Coding for URLLC Retransmission

Cognitive Radio Transmission Strategies Exploiting the Primary-Link Adaptivity

Queueing Delay and Energy Efficiency Analyses of Sleep Based Power Saving Mechanism.

Energy-Efficient Cross-Layer Optimization for Wireless Sensor Networks

Cross-layer Optimization Method in ARQ Systems with Adaptive Modulation

Queuing Analysis on Mimo Systems with Adaptive Modulation and Coding

A New Rate-Based Active Queue Management Scheme over Wired-cum-Wireless Networks

Energy Efficient Cooperative Sleep Control Using Small Cell for Wireless Networks

Energy-Efficient Buffer-Aided Relaying Systems with Opportunistic Spectrum Access

Energy-Efficient TDMA with Quantized Channel State Information

Analyzing and Optimizing Adaptive Modulation-Coding Jointly with ARQ for QoS-Guaranteed Traffic

Power-Efficient Resource Allocation and Quantization for TDMA Using Adaptive Transmission and Limited-Rate Feedback

Traffic-aware Power Adaptation and Base Station Sleep Control for Energy-Delay Tradeoffs in Green Cellular Networks

Energy-Efficient Modulation Design for Reliable Communication in Wireless Networks

A Power Efficient Adaptive Modulation Scheme over Fading Channel

Control-Aware Energy-Efficient Transmissions for Wireless Control Systems With Short Packets

Optimal Delay-Power Tradeoff in Wireless Transmission with Fixed Modulation

An Adaptive Power Efficient Packet Scheduling Algorithm for Wimax Networks

Adaptive Frequency Carriers On/off Based Energy-Saving Control for Base Stations in Wireless Access Networks