Abstract:Most occupational asthma from electronic solder fluxes is due to colophony (1, 2). We report the first case of occupational asthma to electronic colophony-free gel flux predominantly containing dodecanedioic acid. The patient worked as an electronics instructor from 1999; he initially used solder wire and a separate flux (both colophony). In 2002, he changed to a colophony-free solder wire (predominantly palmitic acid) and a separate gel flux. In 2004, he developed work-related stuffy nose and dyspnoea. This became worse in 2005 when he woke up twice a night and had a blocked nose, wheeze and sputum for the first 2 h after waking. He was worse in the evening after soldering or the night following soldering. He had no asthma, hay fever or eczema in childhood. His father had occupational asthma from corn dust, but his sister had no asthma. He smoked seven to 10 cigarettes per day since age 17 and gave up 6 weeks before being seen in clinic. He had negative skin tests to all common environmental allergens. He completed serial peak expiratory flow (PEF) measurements every 2 h for a total of 4 weeks. When plotted in Oasys (3), the record showed large deteriorations in PEF (declining up to 120 l/min from mean rest PEF) when he visited the soldering bays and intermittent smaller deteriorations when working in the office. The record was scored by the Oasys work effect index (3) as 3.00 (probable occupational asthma; a score of >2.50 has a sensitivity of 75% and specificity of 94%; 3). The area between the curves (ABC) plot (4) in Oasys analysed the two exposures separately and gave an ABC from waking score of 56 l/min/h in the soldering bay and 5 l/min for the office work (an ABC score of ‡15 l/min/h has a sensitivity of 69% and specificity of 100% for occupational asthma diagnosis; 4). His mean work day diurnal variation was 21% and mean rest day diurnal variation was 12%. His exhaled nitric oxide (FENO) level while exposed was 14.3 ppb (Aerocrine Niox at 50 ml/s). He was admitted for specific inhalation challenge testing to both solder wires and fluxes. He melted approximately 5 m of solder wire (using an iron heated to 370 C) spread over three challenges totalling 70 min. For the fluxes, he dipped the soldering iron into the flux approximately every 10 s, letting it fume into the challenge chamber after each insertion. For the colophony flux, he did this over three challenges totalling 17 min and for only 8 min when using the colophony-free gel flux. Figure 1 shows the results of the colophony and dodecanedioic acid fluxes. His forced expiratory volume in 1 s (FEV1) fell by a maximum of 23% from baseline when he was exposed to the dodecanedioic acid flux. He was negative to the colophony wire and wire containing predominantly palmitic acid. His nonspecific reactivity was >4800 lg of methacholine (via the Yan method) prechallenge, becoming measurable postchallenge at 3490 lg. Two years after removal from exposure and while working as an apprenticeship manager without soldering exposure, his asthma continues, but is no longer work-related and his FENO remains normal at 10.7 ppb. Dodecanedioic acid has an asthma hazard index of 0.94 using the chemical asthma hazard assessment programme (5); a value >0.5 has a high probability of being an asthmagen. Other noncolophony based fluxes such as palmitic acid and adipic acid (previously described in a pharmaceutical worker; 6) also have high hazard indexes (0.92 and 0.75 respectively).

Using Basement Membrane of Human Amniotic Membrane As a Cell Carrier for Cultivated Cat Corneal Endothelial Cell Transplantation.

In Vitro Evaluation and Transplantation of Human Corneal Endothelial Cells Cultured on Biocompatible Carriers

Evaluation of reconstructed human corneal endothelium sheets made with porcine Descemet's membrane in vitro and in vivo

Electrospun Nanofiber Membrane for Cultured Corneal Endothelial Cell Transplantation

Alginate Hydrogel Integrated with a Human Fibroblast-Derived Extracellular Matrix Supports Corneal Endothelial Cell Functionality and Suppresses Endothelial-Mesenchymal Transition

Occupational asthma to gel flux containing dodecanedioic acid

Novel Corneal Endothelial Cell Carrier Couples a Biodegradable Polymer and a Mesenchymal Stem Cell-Derived Extracellular Matrix

Human anterior lens capsule as carrier matrix for cultivated human corneal endothelial cells

Fabrication of bioengineered corneal endothelial grafts using an allogeneic cornea-derived matrix

Understanding physical activity intentions among French Canadians with type 2 diabetes: an extension of Ajzen's theory of planned behaviour

Preliminary Studies of Constructing a Tissue-Engineered Lamellar Corneal Graft by Culturing Mesenchymal Stem Cells Onto Decellularized Corneal Matrix.

Pluripotent stem cell-derived corneal endothelial cells as an alternative to donor corneal endothelium in keratoplasty

Development of A Rabbit Corneal Equivalent Using an Acellular Corneal Matrix of A Porcine Substrate

Human corneal endothelial cell transplantation with nanocomposite gel sheet preserves corneal stability in post-corneal transplant bullous keratopathy: a 16-year follow-up

Acellular human amniotic membrane: A safe and stable matrix for corneal stromal regeneration

Comparison of Beneficial Factors for Corneal Wound-Healing of Rat Mesenchymal Stem Cells and Corneal Limbal Stem Cells on the Xenogeneic Acellular Corneal Matrix in Vitro.

Constructing a Novel Three-Dimensional Biomimetic Corneal Endothelium Graft by Culturing Corneal Endothelium Cells on Compressed Collagen Gels

Preparation and Evaluation of Bacterial Nanocellulose/Hyaluronic Acid Composite Artificial Cornea for Application of Corneal Transplantation

Comparison of Human Denuded Amniotic Membrane and Porcine Small Intestine Submucosa as Scaffolds for Limbal Mesenchymal Stem Cells

Long-Term Observation and Sequencing Analysis of SKPs-Derived Corneal Endothelial Cell-Like Cells for Treating Corneal Endothelial Dysfunction

Potential of an Amphiphilic Artificial Corneal Endothelial Layer as a Replacement Option for Damaged Corneal Endothelium