Abstract:This article presents a novel design approach of a reconfigurable filter with switchable operating frequency, bandwidth, and response type. Boolean-like operations, including intersection and complement, of frequency responses are defined, as the basic design principle. The switchable filtering responses are discussed in detail when utilizing one-or two-channel filters with overlapping passbands. It is easy to extend the properties to the N -stage case of a reconfigurable filter. Generally, for a cascaded N -stage reconfigurable filter, one can achieve 2N(2)+ 2 filtering responses, including (3N-1) N/2 bandpass responses, (N+1)N/2 bandstop responses, along with an all-pass (AP) response and an all-stop (AS) response. As the basic building block, a switchable filter unit consists of a channel bandpass filter (BPF), a circulator, and three RF switches, whose response type can be reconfigured by adjusting the states of the switches. A single-stage switchable filter unit and a three-stage reconfigurable filter prototype are developed with microstrip structures. The reconfigurable filter prototype offers 20 different filtering responses with only three channel filters, occupying an area of 1.21x 0.69 lambda(2)(g). For the provided bandpass responses, the 12 passbands cover 1.17 similar to 1.6 GHz with selectable bandwidths of 60.6 similar to 245.4 MHz, with in-band insertion losses (ILs) of 5.1 similar to 7.9 dB. For the bandstop responses, the six suppression bandwidths are 227.6 similar to 368.1 MHz, with an in-band suppression of 16.3 similar to 22.5 dB. The IL is 3.5 dB for the AP response, and the suppression level is 63 dB for the AS response. Good agreement is obtained between the simulated and measured results to validate the proposed technique.

A Reconfigurable Multi-mode Filter Based on Switched-capacitor Technology

3D Heterogenous Integrated Wideband Switchable Bandpass Filter Bank for Millimeter Wave Applications

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

Compact Switchable Filter with Three State Modes Using Simple Microstrip Structure

Reconfigurable Filter with Switchable Operating Frequency, Bandwidth, and Response Type Using RF Switches and Circulators

Novel Multifunctional Reconfigurable Wideband Frequency-Selective Filter/Shielding With Independently Controlled Operating Modes

Reconfigurable Bandpass Filter With Multi-Band Switching and Band Shiftability

A Reconfigurable Dual-Mode Bandpass Filter Based on Substrate Integrated Waveguide

Design of A Reconfigurable Filtering Switch with Sharp Rejection and Wide Stopband

Multifunctional Switchable Filter Using Coupled-Line Structure

SiC-MOSFET Shunt Active Power Filter Based on Half-Cycle SDFT and Repetitive Control

Reconfigurable Microwave Photonic Transversal Filter Using a Variable Gain Tilt Filter

Reconfigurable Low Pass Filter with Automatic Frequency Tuning for WCDMA and GSM Application.

A Baseband Lpf for Gsm, Td-Scdma and Wcdma Multi-Mode Transmitters

Current-Mode Mult-Functions Filter Designing and Realization

Implementation and design of multifunction filter using multiply-output CCII

A Reconfigurable Low Power Filter in 65 nm CMOS for Multi-standard Transmitters

Design of high selectivity tunable bandpass filter with switchable single‐/dual‐band responses

A Reconfigurable CBP/LP Active RC Filter with Noise-Shaping Technique for Wireless Receivers

Novel Single-Ended-to-Balanced Filter With Reconfigurable Working Modes, Frequency, Bandwidth, and Single/Dual-Band Operations