Abstract:PURPOSE:Photoacoustic imaging (PAI) used for noninvasive imaging of biological tissue has been reported in many literature. However, there are still some disadvantages in the novel technique, such as the poor efficiency of imaging. In the current PAI, multiple excitation of laser and multiple acquisition of signal are necessary for image reconstruction. In this case, laser pulses may injure biological tissue due to energy accumulation. To popularize PAI in clinical applications, it is necessary to develop a new imaging approach to increase the efficiency of PAI.METHODS:A spatial phase-controlled algorithm is presented for full-field three-dimensional (3D) image reconstruction. By using the algorithm, photoabsorption sources at different depths can be reconstructed using just one set of data acquired in single laser shot. Unfocused plane transducer array and parallel data-acquisition (PDA) equipment are used for real-time photoacoustic (PA) signal detection and acquisition.RESULTS:The spatial resolution of the 3D PAI system was analyzed. Two graphite rods at various positions in a simulation model and two bifurcate vessels in the ear of rabbit were imaged. In addition, the motion trace of one particle flowing at constant velocity was captured dynamically. Experimental results showed that spatial phase-controlled algorithm based on plane transducer array and PDA system was capable of static and dynamic 3D PAI.CONCLUSIONS:Spatial phase-controlled algorithm is introduced for 3D image reconstruction. The PA signals are collected by plane transducer array and PDA system in single pulse excitation. The acquired volumetric data are sufficient for 3D image reconstruction. Therefore, tissue can avoid the long-term exposure to light source and it is safer than the current PAI for in vivo imaging. With an increase in the repetition rate of laser pulse and speed of image display, the imaging method will realize real-time 3D imaging, which will be significant in clinical detection and medical diagnosis.

The three-dimensional simultaneous photoacoustic tomography imaging technique based on acoustic lens

Simultaneous Photoacoustic Imaging Technique Using an Acoustic Imaging Lens.

A Simultaneous Multiple-Section Photoacoustic Imaging Technique Based on Acoustic Lens

The Imaging Property of Photoacoustic Fourier Imaging and Tomography Using an Acoustic Lens Imaging System

A Simultaneous Photoacoustic Tomography Imaging Technique in Multilayer Media

Three-Dimensional Photoacoustic Imaging Technique Based on Acoustic Lens

Two Dimensional Photoacoustic Imaging Based on an Acoustic Lens and the Peak-Hold Technology

A Novel Photoacoustic Tomography Based on A Time-Resolved Technique and an Acoustic Lens Imaging System

Photoacoustic Tomograph with Ultrasound Probe Beam

Fast Photoacoustic Tomography by Use of Acoustic Lens

Fast Photoacoustic System Based on an Acoustic Lens and the Peak Detection Technology

Photoacoustic Tomography Imaging Using a 4f Acoustic Lens and Peak-Hold Technology

Time Domain Photoacoustic Tomography System Using Linear Transducer Array

&Lt;title>photoacoustic Tomography with Ultrasound Probe Beam</title>

Photoacoustic Tomography Imaging Based on a 4f Acoustic Lens Imaging System.

Listening to Light by Fast Photoacoustic Tomography Based on a Digital Phased Array System

Photoacoustic tomography with ultrasound probe beam

3d Photoacoustic Tomography System Based On Full-View Illumination And Ultrasound Detection

Photoacoustic and Ultrasonic Coimage with A Linear Transducer Array

Full-field 3D Photoacoustic Imaging Based on Plane Transducer Array and Spatial Phase-Controlled Algorithm.

Compressed Single-Shot 3D Photoacoustic Imaging with a Single-Element Transducer