Abstract:The quality of centrifugal pump inlet flow field is an important factor that affecting the performance of pump. Studies have proved that the vortex in the inlet area can also bring an extra flow instability to pump, which results in a hydro-induced vibration. This phenomenon is more common and significant in the pumps with an elbow tube, which is often applied to minimize installation size, before pump inlet. Therefore, it is necessary to look into the influence of inlet flow field instability on pump performance especially the vibration performance. The methods of adjusting pump inlet flow field is also worthy of being studied in the meantime. In this study, the influence of inlet vortex on the performance of centrifugal pump with an elbow inlet tube is investigated by means of CFD analysis. The flow is significantly affected when going through the elbow tube inlet and then turbulence is generated as a result, which enters the impeller at the next moment. The turbulence brings an asymmetrical flow condition at the impeller suction area, which can intensify pressure pulsation and hydro-induced vibration. In order to reduce the turbulence, two modifications on the elbow inlet tube are investigated in this study. A specially designed vane is deployed inside the inlet tube in the MOD1, and the MOD2 is added with two splitter vanes on the basis of the MOD1. The turbulent flow in the elbow inlet tube can be reordered as it is controlled by the vanes. The difference on pump performances that the inlet vane has made is specifically simulated and compared. The flow fields of the inlet tube influenced by the vane is also investigated on the vortex distribution and velocity vector distribution. The MOD1 has a generally smaller pressure fluctuation amplitude than the prototype in the impeller inlet area while the pressure fluctuation amplitude of the MOD2 in the impeller inlet area is stronger than the prototype. It is considered as a consequence of multiple effects, which are, the rise of velocity because of flow area replacement by the vanes making the flow field less stable as well as the wake flow induced by the vanes increasing the instability of the flow field. Therefore, although the flat vanes can help adjusting the flow field, their negative influences also act in the opposite way. It is worthwhile to find the balance between the benefits and the costs in flow field stability of installing adjusting vanes. The selection of parameter, number and installation position needs to be further investigated. The numerical results of the MOD1 are also validated through experimental investigations.

Effect of the Hydrodynamic Forces on the Vibration of Rotor in a Centrifugal Pump

RESEARCH ON THE FLUID-INDUCED EXCITATION CHARACTERISTICS OF THE CENTRIFUGAL PUMP CONSIDERING THE COMPOUND WHIRL EFFECT

Analysis of Off-Design Flow Fields in Centrifugal Pumps and Hydrodynamic Forces on Impellers

Analysis of flow characteristics in the volute casing of centrifugal pump based on numerical simulation

The investigation of the effect of volute tongue on hydrodynamic forces for high speed centrifugal pump

Fluid Exciting Forces of a Centrifugual Pump on Impeller

Rotordynamic Forces Generated by Discharge-to-suction Leakage Flows in Centrifugal Pumps

CFD-Rotordynamics Sequential Coupling Simulation Approach for the Flow-Induced Vibration of Rotor System in Centrifugal Pump

Quantitative Analysis of Energy Loss and Vibration Performance in a Circulating Axial Pump

Analysis of the Pressure Pulsation and Vibration in a Low-Specific-Speed Centrifugal Pump

Research of Fluid-Induced Pressure Fluctuation Due to Impeller-Volute Interaction in A Centrifugal Pump

Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller

Mechanism of the rotor-stator interaction in a centrifugal pump with guided vanes based on dynamic mode decomposition

Characteristics Of Centrifugal Pump Rotor System Under Exciting Forces Generated By Shroud Leakage Flows

Study on the Influence of Centrifugal Pump Inlet Flow Field Instability and Methods of Adjustment

Study of unsteady flow-induced vibration of centrifugal pump volute casing using fluid-solid coupling

Unsteady flow and pressure pulsation characteristics in centrifugal pump based on dynamic mode decomposition method

A Review of Fluid-Induced Excitations in Centrifugal Pumps

Fluid Exciting Forces on Centrifugual Pump Part Ⅰ : Force on Volute

Effect of Relative Positions between Blade and Volute Tongue on Prediction of Performance in Simulation of Centrifugal Pump

Study On Radial Force Characteristics Of Double-Suction Centrifugal Pumps With Different Impeller Arrangements Under Cavitation Condition