Simulation of Maglev ATO Control System Based on MATLAB

YANG Guang,TANG Zhen-min

DOI: https://doi.org/10.3969/j.issn.1005-8451.2007.06.018

2007-01-01

Abstract:Based on the simulation toolbox of MATLAB a simulation method about Maglev’s ATO Control System was discussed.In addition,it was made up models of ATO Control System,then analyzed the simulation result.The result showed that the control effect was better in control performance.

What problem does this paper attempt to address?

Accurate Simulation and Analysis of PMSM Vector Control System

Dehong Xu

2009-01-01

Abstract:The permanent magnet synchronous servo system simulation model was established,based on the principle of vector control,with Id = 0 control manner,in Matlab/Simulink environment.In order to accurately simulate the actual system,add the dead zone and achieve the effect of discrete control in the simulation model.PMSM parameters of the simulation are all in accordance with the parameters of the actual motor manual.For controller,according to the traditional engineering method,figure out the parameters of current and speed loop regulator,respectively.But in development of the model and analysis of the simulation results,find 2 problems of simulation system:1)differences between simulink its own coordinate transformation module and theoretical formula,including the differences of select parameters and reference angle;2) due to problem of simulation step,the responses of discrete control system have a concussion in a certain degree.For the above-mentioned problems a detailed analysis was carried out.Finally the simulation waveform is very close to the actual system.
Simulation of Precision Flow Control System Based on MATLAB/Simulink

LI Yupeng,WANG Xuanyin

DOI: https://doi.org/10.3969/j.issn.1001-3881.2011.11.030

2011-01-01

Abstract:Compared with the traditional hydraulic regulating speed system,variable-frequency regulating speed technology,applied in hydraulic system,brings more advantages.A variable-frequency regulating hydraulic simulative system was designed based on Matlab/Simulink.The simulation emphasis focused on the vector control regulating speed system of asynchronous motor.Simulation curves show that using the closed-loop vector control method,the system has better dynamic performance.
Simulation of Magnetically Controlled Reactors Based on MATLAB

Peng Kang Xie,Guo Zhu Chen

DOI: https://doi.org/10.4028/www.scientific.net/amm.599-601.1064

2014-01-01

Applied Mechanics and Materials

Abstract:Nowadays, with the fast development of power system, reactive power control has become a hot topic. As a kind of reactive power control equipment, magnetically controlled reactor (MCR) has been widely concerned and researched. This paper analyzed the working principle of MCR by mathematic method, built the circuit model in MATLAB software. Simulation results show the operating characteristics of MCR.
The Simulation Analysis of Fuzzy Control System of BLDCM

SHI Hao,PAN Zai-ping

DOI: https://doi.org/10.3969/j.issn.1001-6848.2005.05.013

2005-01-01

Abstract:This paper paper presents the design of BLDCM's speed regulating system,which is based on fuzzy control.At first the principle of BLDCM is analyzed and the model is built,then a test is performed on a speed regulating system of close loops of speed and current.Then through fuzzy PD controller and integrating element,the properties of PID controller is perfected,the precisions of control systen is improved.At last,through combiningFuzzy Toolbox and SIMULINK in MATLAB,the computer simulation of fuzzy control system of BLDCM is implemented.The result of simulation shows this method has faster dynamic response and higher regulating precision.
THE SIMULATION STUDY ON CONTROL STRATEGY OF CASCADE BRUSH-LESS VARIABLE-SPEED CONSTANT-FREQUENCY DOUBLY-FED GENERATOR

Qin Hong,Pan Zaiping,Yang Jingang

DOI: https://doi.org/10.3321/j.issn:0254-0096.2009.05.001

2009-01-01

Abstract:The VSCF generation ability of Cascade Brushless Doubly-Fed Generator(CBDFG) was demonstrated using modeling and simulation of this dq model with the help of a rotating reference frame dq model of CBDFG.In order to study VSCF control strategy of CBDFG,a method of Field Oriented Control was utilized.A synchronous reference frame MT model of CBDFG was established first,then a kind of control strategy based on stator flux linkage oriention of CBDFG was put forward.A computer simulation model has been established using Matlab/Simulink and S function,Simulation results of CBDFG in no-load,load,and grid connected control strategies verified the validity of the FOC control strategy.
A Combined Simulation of High-Speed Train Permanent Magnet Traction System Using Dynamic Reluctance Mesh Model and Simulink

Xiao-yan Huang,Jian-cheng Zhang,Chuan-ming Sun,Zhang-wen Huang,Qin-fen Lu,You-tong Fang,Li Yao

DOI: https://doi.org/10.1631/jzus.a1400284

2015-01-01

Journal of Zhejiang University SCIENCE A

Abstract:This paper presents a combined dynamic parameter model (DPM) of a high speed train permanent magnet traction system using a dynamic reluctance mesh model and MATLAB Simulink. First, the dynamic reluctance model of the permanent magnet synchronous motor is introduced. Then the combined models of the traction system under id=0 and maximum torque per ampere control are built. Simulations using both constant parameter models and DPM models are carried out. The speed and torque characteristics are obtained. The results confirm that the DPM model provides higher accuracy without much sacrifice of time consumption or computation resource.
Modeling and Simulation of Traction Power Supply System for High-Speed Maglev Train

Ziyu Zou,Mengfei Zheng,Qinfen Lu

DOI: https://doi.org/10.3390/wevj13050082

IF: 2.3

2022-01-01

World Electric Vehicle Journal

Abstract:The electromagnetic suspension high-speed maglev train system uses long-stator linear synchronous motors (LLSMs) as levitation and traction mechanisms. In this paper, the modeling and simulation of the traction power supply system for the maglev train are performed. The simulation models include transformers, converters, variable-length cables and LLSMs of both two sides and two ends; meanwhile, the corresponding control and segmented power supply strategies, including the two-step method and three-step method, are implemented. Based on the system model, the operational performance of the high-speed maglev power supply control system is verified, and the fault performances under open circuit and short circuit are also analyzed. The whole simulation modeling and results have important reference significance for the research of high-speed maglev technology.
Model-based Simulation and Verification on Typical Function Scenes of High-Speed Maglev Vehicle Operation Control System

Wei Guodong,Yuan Lei,Ma Lianchuan

DOI: https://doi.org/10.1088/1742-6596/1654/1/012079

2020-10-01

Journal of Physics: Conference Series

Abstract:Abstract Under the new situation, high-speed maglev transportation has gradually become the new development direction of the railway field in the future. Its vehicle operation control system (VOCS for short) as a key subsystem has a great impact on the safety and stability of the entire high-speed maglev train control system. The high-speed maglev VOCS has the characteristics of complex system structure and frequent interaction between its modules. Finding hidden safety hazards and design errors in the system design and development process and ensuring the safety and efficiency of system design and development has become an important task of related projects. On this background, modelling and simulation of typical scenarios of high-speed maglev VOCS are absolutely necessary in the early stage of project development, drawing on the traditional wheel-rail vehicle system simulation verification research results, with the help of advanced computer simulation methods. Using Simulink / Stateflow tools for the parking point stepping functional scenario as an example, the validity and correctness of the high-speed maglev VOCS were verified to ensure the operation safety of the high-speed maglev train through.
Simulation and Analysis Method for the Operation Characteristics of CIT400 High-Speed Comprehensive Inspection Train Based on Predictive Current Control

FANG Youtong,LIU Li,MA Jien,PEI Chunxing

DOI: https://doi.org/10.3969/j.issn.1001-4632.2012.04.13

2012-01-01

Abstract:Based on the structure of traction drive system and the traction characteristics of CIT400 high-speed comprehensive inspection train,a simulation model was established by MATLAB/Simulink for the traction drive system of high-speed comprehensive inspection train under predictive current control.The operation characteristics of CIT400 high-speed inspection train were simulated and analyzed upon short-time power failure of pantograph and net voltage fluctuation under traction and brake conditions.Simulation results were compared with measured data.Research shows that the simulation result and measured data are basically identical.The established model can correctly reflect the operation characteristics of the train and can meet the dynamic and static requirements for the actual operation of train.
Simulation of AMT autoshift process based on matlab/simulink/stateflow

Yuhai Wang,Jian Song,Xingkun Li

DOI: https://doi.org/10.4271/2004-01-2055

2004-01-01

Abstract:This paper simulates the working process of Automated Mechanical Transmission (AMT), especially establishes an efficient method of engine output torque estimation based on tests and a dynamic model of engage process of clutch. Then, a continuous/discrete hybrid system model of AMT control system is established based on Matlab/Simulink/Stateflow. The transitions between different states are described in details and the control flow chart is offered. Compared with the vehicle test results, the simulation model is reliable. The simulation model will well help to develop AMT control system and improve its performance. Copyright © 2004 SAE International.
Simulation for Control System of AMT Vehicles on Snow Mode

HU Ting,SONG Jian,LI Lei

DOI: https://doi.org/10.3969/j.issn.1673-1964.2007.03.002

2007-01-01

Abstract:Using MATLAB/Simulink/Stateflow,this paper explored the simulation of automatic transmission control system of AMT vehicles on Snow Mode,and established engine model,transmission model,driver's intention identification model and tire force model in the condition of low adhesion etc.Based on this simulation system,the control of AMT vehicles on Snow Mode was studied,and validated by the results of the simulation.
A Maglev Transportation Simulation Platform Using UML

YANG Guang,TANG Zhen-min

DOI: https://doi.org/10.3969/j.issn.1006-9348.2008.03.068

2008-01-01

Abstract:The function of Operation Control System (OCS) is automatic operation control and safety protection in Maglev transportation system. The simulation platform for Maglev transportation is a powerful tool for these study works. Based on the structure of existing Maglev operation control system (OCS), the existent problems of operation control technology in main Maglev line are pointed out. A three step scheme of simulation study for OCS is discussed. And then using Unified Modeling Language (UML) and the idea of the Object-Oriented Analysis (OOA), a visible model of Maglev simulation platform is build in the environment of Rational Rose. The model includes use-case diagram, class diagram, sequence diagram and activity diagram. The platform is developed by VC++ and the result has confirmed the correctness and feasibility of the platform.
High-speed Maglev Traction Controller Design

Yang Guang

DOI: https://doi.org/10.1109/chicc.2008.4604977

2008-01-01

Abstract:High-speed Maglev control system is highly integration automatic system combined with levitation control subsystem, traction control subsystem, and operation control subsystem, and traction control subsystem is one of key subsystem. The problem of High-speed Maglev traction control was analyzed in this paper, and the nonlinear dynamic model of the High-speed Maglev traction system was set up. The precision linear model of the High-speed Maglev traction system was given based on the feedback linearization method, and based on it the controller was designed. The simulations show the good velocity curve tracking performance and the robustness of the traction control system.
A Stateflow Based Simulation Of Uav Multi-Mode Flight Control

Liu Bo,Li Ping

DOI: https://doi.org/10.1109/WCICA.2010.5553864

2010-01-01

Abstract:How MATLAB, Simulink and stateflow can be used to design and realize a simulation platform for UAV multi-mode flight control system is presented. The simulation platform includes nonlinear dynamic model of UAV, control system and environment model which is to make the simulation more similar to the real flight environment. The environment model consists of wind shear submodel, atmosphere submodel and gravity submodel. In accordance with the design philosophy of navigation level, flight modes are regarded as different states in the finite state machine module which is for the logic control. The control module is divided into two subsystems which are longitudinal control subsystem and lateral control subsystem. In this way, the disturbance caused by the switch among different modes which share the same control law can be avoided. The simulation result demonstrates the validity of the stateflow based simulation platform of UAV multi-mode flight control.
State Space Model and Simulation of Long Stator Linear Synchronous Motor in Maglev Vehicle

CZ Fan,YT Fang,YY Ye,ZX Li

DOI: https://doi.org/10.1109/itsc.2003.1252730

2003-01-01

Abstract:This paper presents a configuration of a long stator linear synchronous motor (LSLSM) for maglev vehicle systems; the foundational state-space model is developed for static and dynamic analysis. The relative effects between propel and the levitation force within the stator and the mover are discussed. The simulation results of the propelling force and the levitating force are also presented.
Research on Load Unbalance Problem and Control Strategy of Traction Motors in High-speed Train

WANG Bin,LU Qin-fen,HUANG Xiao-yan,YU Jin

DOI: https://doi.org/10.3969/j.issn.1001-2095.2012.10.005

2012-01-01

Abstract:The load unbalanced distribution status of traction motors in high-speed train was analyzed due to the wheel diameter deviation and motor parameter deviation.To this problem,a control strategy based on weighted linear regression was proposed.Compared to the traditional master-slave control strategy,it can yield better performance to balance the traction motors′ output.By established simulation model of CRH2 traction driver system based on Matlab/Simulink,the simulation results were obtained and validate the theoretical analysis.The research provides good recommendations about how to select matched traction motors.
Active Control of Active Magnetic Bearings for Maglev Flywheel Rotor System Based on Sliding Mode Control

Zhongbo Wang,Changsheng Zhu

DOI: https://doi.org/10.1109/vppc.2016.7791603

2016-01-01

Abstract:Flywheel unit is one of the most important ways to storage and recovery energy in electric vehicles. In order to realize high energy density, flywheel unit always work at high speed. The active magnetic bearing (AMB) based flywheel unit is often used. Normal PID controller used in the AMB-rotor system of the AMB flywheel unit cannot effectively suppress rotor unbalance disturbance. A sliding mode control (SMC) system is designed and improved based on Sigmoid function in this paper. The effectiveness of the PID and SMC controller is analyzed by simulation. It is shown that the Sigmoid function based SMC has obvious advantages in suppressing unbalance disturbance of AMB-rotor system.
Simulation Of Separate Meter In And Separate Meter Out Control Of Electro Hydraulic Load Sensing System

Yingjie Liu,Huayong Yang,Bing Xu,Dingrong Zeng

2009-01-01

Abstract:Introduce to Separate Meter In and. Separate Meter Out (SMISMO) Control of Electro Hydraulic Load Sensing(EHLS) System composition structure and work principle. SMISMO control system used two 3 direction/3 way control valves to replace the traditional proportional or servo valve to control actuator speed. System control degree of freedom is increased. Simulation model of SMISMO control system has been built to study the control characteristic and energy saving characteristic. According to system work modes, two controller is designed, the motion controller is based on Calculation flow feedback, the pressure level controller is built for energy saving. Also the effect of structure parameters variation of the control valve to control system is studied by simulation. Results show, SMISMO control system has achieved good speed Control accuracy as well as energy saving characteristic. When the resonance frequency of the control valve is lower than 5Hz, the control precision is decreased greatly. When the damping of control valve is lower than 0.4, the velocity overshoot is high, Step dead band compensation have improved system response, Through parameter optimization for the control valve., Studied system is promising for application in mobile machine.
Simulation of Shield's Thrust Hydraulic System Based on AMESim and MATLAB

YANG Yang,GONG Guofang,HU Guoliang,YANG Huayong

DOI: https://doi.org/10.3969/j.issn.1001-3881.2006.06.042

2006-01-01

Abstract:Simulation of shield's thrust hydraulic system was achieved by using AMESim and MATLAB software,and pressure and velocity compound control strategy based on PID and fuzzy self-tuning PID was adopted.Result shows that the system has high steady-state precision,short adjusting time,little overadjusting,and can overcome the nonlinear time-varying character.
Simulation of Permanent Magnet Synchronous Motor Vector Control Based on ITAE Optimization

LI Liang-liang,HE Yong,YE Hai-xiang

DOI: https://doi.org/10.3969/j.issn.1673-6540.2011.06.007

2011-01-01

Abstract:The permanent magnet synchronous motor mathematical model and vector control were introduced.The traditional engineering design method was given at the same time,based on computer-aided design tool nowadays and by the simulation method of MATLAB/Simulink,the ITAE optimization to design permanent magnet synchronous motor vector control PI controller parameters was proposed.Compared with traditional PI controller,it had better control effect based on the ITAE optimum control.

Simulation of Maglev ATO Control System Based on MATLAB

Accurate Simulation and Analysis of PMSM Vector Control System

Simulation of Precision Flow Control System Based on MATLAB/Simulink

Simulation of Magnetically Controlled Reactors Based on MATLAB

The Simulation Analysis of Fuzzy Control System of BLDCM

THE SIMULATION STUDY ON CONTROL STRATEGY OF CASCADE BRUSH-LESS VARIABLE-SPEED CONSTANT-FREQUENCY DOUBLY-FED GENERATOR

A Combined Simulation of High-Speed Train Permanent Magnet Traction System Using Dynamic Reluctance Mesh Model and Simulink

Modeling and Simulation of Traction Power Supply System for High-Speed Maglev Train

Model-based Simulation and Verification on Typical Function Scenes of High-Speed Maglev Vehicle Operation Control System

Simulation and Analysis Method for the Operation Characteristics of CIT400 High-Speed Comprehensive Inspection Train Based on Predictive Current Control

Simulation of AMT autoshift process based on matlab/simulink/stateflow

Simulation for Control System of AMT Vehicles on Snow Mode

A Maglev Transportation Simulation Platform Using UML

High-speed Maglev Traction Controller Design

A Stateflow Based Simulation Of Uav Multi-Mode Flight Control

State Space Model and Simulation of Long Stator Linear Synchronous Motor in Maglev Vehicle

Research on Load Unbalance Problem and Control Strategy of Traction Motors in High-speed Train

Active Control of Active Magnetic Bearings for Maglev Flywheel Rotor System Based on Sliding Mode Control

Simulation Of Separate Meter In And Separate Meter Out Control Of Electro Hydraulic Load Sensing System

Simulation of Shield's Thrust Hydraulic System Based on AMESim and MATLAB

Simulation of Permanent Magnet Synchronous Motor Vector Control Based on ITAE Optimization