Computational Research on Rotating Channel by A Modified Anisotropic Turbulence Model

Jianqin Zhu,Zhi Tao,Chaoqun Nie
DOI: https://doi.org/10.1007/s11630-011-0485-2
2011-01-01
Abstract:Based on the simplified format of the Reynolds stress equations, a fire-new rotational-modification method for the anisotropic turbulence model has been presented. A three-dimensional Navier-Stokes code with this new rotational modified k-ω turbulence models (β=0.1 and β=1) and the standard k-ω turbulence model have been used for the prediction of flow and heat transfer characteristics in a rotating smooth square channel. The Reynolds number Re based on the inlet velocity of the cooling air and hydraulic diameter is 6000. The rotating speed are 300, 600, 900, 1200rpm respectively. The calculations results of using three turbulence models have been compared with the experimental data. The research results show that (1) the rotational modification coefficient Rf 13 used in the new anisotropic k-ω model would increased/decreased the predictions of heat transfer on the trailing surface/leading surface compared to the standard k-ω model. And this tendency would be increased with the increased β. (2) The simulation performance of the standard k-ω model was well on the leading surface. However, on the trailing surface it under-predicted the heat transfer at high rotating speed. (3) The calculation results of the new anisotropic k-ω model with β=0.1 proposed by the present paper agreed well with experimental data, both on the leading and trailing surfaces. Besides, compared to 1, 0.1 is a more appropriate magnitude of β at conditions in the present paper.
What problem does this paper attempt to address?