Abstract:The structural strain plays a significant role in structural condition assessment of in-service bridges in terms of structural bearing capacity, structural reliability level and entire safety redundancy. Therefore, it has been one of the most important parameters concerned by researchers and engineers engaged in structural health monitoring (SHM) practices. In this paper, an SHM system instrumented on the Jiubao Bridge located in Hangzhou, China is firstly introduced. This system involves nine subsystems and has been continuously operated for five years since 2012. As part of the SHM system, a total of 166 fiber Bragg grating (FBG) strain sensors are installed on the bridge to measure the dynamic strain responses of key structural components. Based on the strain monitoring data acquired in recent two years, the strain-based structural condition assessment of the Jiubao Bridge is carried out. The wavelet multi-resolution algorithm is applied to separate the temperature effect from the raw strain data. The obtained strain data under the normal traffic and wind condition and under the typhoon condition are examined for structural safety evaluation. The structural condition rating of the bridge in accordance with the AASHTO specification for condition evaluation and load and resistance factor rating of highway bridges is performed by use of the processed strain data in combination with finite element analysis. The analysis framework presented in this study can be used as a reference for facilitating the assessment, inspection and maintenance activities of in-service bridges instrumented with long-term SHM system.

Application of Optical Fibre Fabry-perot Strain Measurement System in Dafoshi Yangtze River Bridge

Application of Fibre Optic Fabry-Perot Strain Sensor in Bridge Structure Status Monitoring

Fiber Fabry-Perot Sensor and Its Application for Monitoring Bridge Strain

Multi-channel Fiber Optical Fabry-Perot Strain Testing System for the Shibanpo Yangtze River Bridge

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

Full Scale Strain Monitoring of A Suspension Bridge Using High Performance Distributed Fiber Optic Sensors

Research on Full Strain Measurement Performance of Non-intrinsic Optical Fiber F-P Sensor

Connected Pipe Opto-electronic Deflection Measurement System and the Application in Dafoshi Yangtze River Bridge

Study on the embedment of fiber Fabry-Perot strain sensor in prestressed reinforced concrete bridges

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Multi-channel fiber optical sensing system for urban bridge cluster health monitoring

The Application of Optical Fiber Sensors in the Engineering Monitoring of Dongying Yellow River Bridge

Development of distributed fiber-optic sensor system to structure health monitoring

Research, Development and Application of Temperature Measurement System for Bridges

The Quasi-Distributed Strain Monitoring System Based On Optical Fiber Grating In Large Structure

Health monitoring system for Dafosi cable-stayed bridge

Research on State Monitoring of Bridge Cable Based on Optical Fiber Sensing Technology

Experimental Study of Measuring Strain by Fiber-Optic Sensor Used in Civil Engineering Structures

Stiffness Monitoring and Damage Assessment of Bridges under Moving Vehicular Loads Using Spatially-Distributed Optical Fiber Sensors

Experimental Study on Measuring the Stress of External FRP Tendons of Bridges Using Distributed Optic Fiber

Fbg Based Intelligent Monitoring System Of The Tianjin Yonghe Bridge - Art. No. 693312