Abstract:For the first time, an ion imprinted polymer (IIP) able to selectively extract simultaneously all the lanthanide ions was successfully synthesized in acetonitrile using Nd3+ as a template ion, methacrylic acid as a complexing monomer, and ethylene glycol dimethacrylate as a cross-linker. A non-imprinted polymer (NIP) was synthesized under the same conditions as those of the IIP, but in the absence of the template ion. After the removal of the template ions, grounding and sieving, the IIP particles were packed in solid phase extraction (SPE) cartridges. The selectivity of the IIP was evaluated by comparing its behavior with the one of the NIP. Each SPE step (percolation, washing, and elution) was optimized in order to find the best compromise between the selectivity and the extraction recoveries. Using the optimized SPE conditions, the extraction recoveries of eight lanthanide ions representative of the lanthanide family were higher than 77% with an average value of 83% with the IIP, whereas, in the case of the NIP, they ranged between 14 and 36% and they were below 3% for the interfering ions from alkali, transition, and post-transition metal families with the IIP. A first evaluation of the reproducibility of the SPE profiles was carried out by performing statistical tests on the data obtained with several cartridges filled with particles obtained from two different IIP and NIP syntheses. Promising results were obtained. The specific capacity, i. e. the adsorption capacity of Nd3+ ions by the specific cavities of the imprinted polymer, was about 9 mg of Nd3+ per gram of IIP (60 μmol g-1), which is more than enough for the extraction of the lanthanide ions at trace levels. The breakthrough volume was about 1 mL per mg of IIP, leading to an enrichment factor of 15, which allows not only to selectively extract the lanthanides but also to concentrate them. Finally, the imprinted polymer was successfully used to selectively extract lanthanides from tap and river waters spiked at 1 μg L-1.

Synthesis and Applications of Ce(III)-imprinted Polymer Based on Attapulgite As the Sacrificial Support Material for Selective Separation of Cerium(iii) Ions

Synthesis and Characterization of a New Polymer-Based Supramolecular Recognition Material and its Adsorption for Cesium

Synthesis and Characterization of a Novel Organic–inorganic Hybrid Supramolecular Recognition Material and Its Selective Adsorption for Cesium

Preparation of a Novel Macroporous Silica-Based 2,6-Bis(5,6-diisobutyl-1,2,4-triazine-3-yl)pyridine Impregnated Polymeric Composite and Its Application in the Adsorption for Trivalent Rare Earths

Effective Separation of Cesium with a New Silica-Calix[4]biscrown Material by Extraction Chromatography

EFFICIENT ADSORPTION OF Ce (III) ONTO POROUS CELLULOSE/GRAPHENE OXIDE COMPOSITE MICROSPHERES PREPARED IN IONIC LIQUID

Synthesis of a Novel Macroporous Silica-Calix[4]arene-Crown Supramolecular Recognition Material and its Adsorption for Cesium and some Typical Metals in Highly Active Liquid Waste

18-Crown-6-ether assembly of cesium ion-imprinted polymer enabling efficiently selective separation of cs(I) from aqueous solution

A Sulfonic-Functionalized Cellulose Adsorbent for the Rapid Removal of Cerium (III) from Aqueous Solutions

Selective adsorption of Zn2+ on surface ion-imprinted polymer

Green Preparation of Aminated Magnetic PMMA Microspheres via EB Irradiation and Its Highly Efficient Uptake of Ce(III)

Selective solid phase extraction of lanthanides from tap and river waters with ion imprinted polymers

Selective removal of aluminum ions from rare earth solutions by using ion-imprinted polymers

Synthesis and Application of Novel Magnetic Ion-Imprinted Polymers for Selective Solid Phase Extraction of Cadmium (II)

Removal of Cerium from Wastewater Based on Polymer-Enhanced Ultrafiltration Technology through Polyethersulfone-g-Poly(N-vinyl-2-pyrrolidone) Modified Membrane

Preparation of graphene oxide/cellulose composites in ionic liquid for Ce (III) removal.

Selective removal and recovery of La(III) using a phosphonic-based ion imprinted polymer: Adsorption performance, regeneration, and mechanism

Separation and preconcentration of cerium (III) and Iron (III) on magnetic nanocomposite hydrogel

Selective Adsorption Behavior and Mechanism for Cd(II) in Aqueous Solution with a Recoverable Magnetie-Surface Ion-Imprinted Polymer

Preparation of Lanthanide Ion Surface Imprinted Polymers Based on Mesoporous Silica and Their Adsorption Properties

Carbonized polymer dots-based molecular imprinting: An adsorbent with enhanced selectivity for highly efficient recognition and removal of ceftiofur sodium from complex samples