Abstract:The primary achievement in this work has been the discovery that turbulent upward flame spread on noncharring materials (for pyrolysis lengths less than 1.8 m) can be directly predicted by using measurable flammability parameters. These parameters are: a characteristic length scale which is proportional to a turbulent combustion and mixing related length scale parameter (q(net)(") (Delta H-c/Delta H-upsilon))(2), a pyrolysis or ignition time tau(p), and a parameter which determines the transient pyrolysis history of a non-charring material: lambda = L/c Delta T-p = ratio of the latent heat to the sensible heat of the pyrolysis temperature of the material. In the length scale parameter, q(net)(") is the total net heat flux from the flames to the wall (i.e., total heat flux minus reradiation losses), Delta H-c is the heat of combustion and Delta H-upsilon is an effective heat of gasification for the material. The pyrolysis or ignition time depends (for thermally thick conditions) on the material thermal inertia, the pyrolysis temperature, and the total heat flux from the flames to the wall, q(fw)("). The present discovery was made possible by using both a numerical simulation, developed earlier, and exact similarity solutions, which are developed in this work. The predictions of the analysis have been validated by comparison with upward flame spread experiments on PMMA. The present results are directly applicable for pyrolysis lengths less than 1.8 m over which experiments in practical materials show that the total (radiative and convective) heat flux to the wall from the flames is a function of the height normalized by the flame height (Z/Z(f)) having a maximum value that is nearly constant for many materials; this profile is approximated in the work by a uniform profile of constant heat flux over the flame length, without loss of generality or violation of the physical situation. As the pyrolysis length increases (> similar to 1.8 m), radiation dominates and a different total wall heat flux distribution applies. For this case a numerical simulation, such as FMRC's upward Flame Spread and Growth (FSG) code, can be used to predict upward flame spread rates while the present correlations can provide an upper bound for the flame spread rate.

A Simple Algebraic Model for Turbulent Wall Fires

Turbulent convective flows and burning on vertical walls

A Model for Ceiling Flame Spread

Flame Radiation Distribution from Fires

Similarity solutions and applications to turbulent upward flame spread on noncharring materials

Experimental and theoretical study of combustion and aerothermodynamic effects on the flame structure from wind-driven rectangular fires

Flame Evolution and Radiation Hazards of Rectangular Fires Between Two Parallel Walls

Critical Conditions for Upward Flame Spread and Comparison with Empirical Flammability Indices

Heat Fluxes and Flame Heights in Façades from Fires in Enclosures of Varying Geometry

Experimental Study on Flame Morphologic Characteristics of Wall Attached Non-Premixed Buoyancy Driven Turbulent Flames

A Numerical Model for Flame Spread along Combustible Flat Solid with Charring Material with Experimental Validation of Ceiling Flame Spread and Upward Flame Spread

A Numerical Model for Ceiling Flame Spread Beneath A Combustible Board with Charring Material

Flame Geometry Of Downward Buoyant Turbulent Jet Fires Under Cross Flows: Experiments, Dimensional Analysis And An Integral Model

A generic flame shape model and analytical models for geometric view factor calculation on the fire exposure surface

Flame Profile Parameters of Horizontal Turbulent Jets: Experiments, Similarity Analysis and an Integral Model

Experimental Study on Flame Height and Temperature Profile of Buoyant Window Spill Plume from an Under-Ventilated Compartment Fire

Effects of Transient Pyrolysis on Wind-Assisted and Upward Flame Spread

A simple but effective bushfire model: analysis and real-time simulations

Effect of Wall Heat Transfer on the Dynamics of Premixed Spherical Expanding Flames

Experimental Study and Physical Analysis of Flame Geometry in Pool Fires under Relatively Strong Cross Flows

The initial convective flow in fire