Abstract:Large volume cubic press is one of the most popular high pressure devices which can produce pressures up to about 7 GPa. It is well known experimentally that the enhancing of the maximum pressure generated in the large volume cubic press has attracted wide attention among scientists and engineers because the higher pressure is capable of synthesizing some materials with interesting properties. In the large volume cubic press, pyrophyllite is typically used as a pressure-transmitting medium. A specimen immersed in such a solid experiences a generalized stress state. The pressure distribution in pyrophyllite is an important parameter for characterizing the sample environment and designing the experiments at high pressure. There is a need for the quantitative measurement of pressure gradients in the pyrophyllite pressure medium, so that the accurate experimental data under high pressure can be obtained. In the large volume cubic apparatus (68 MN), we put a circuit into the high pressure cubic cell, so that the pressures at various positions can be measured by using the phase transitions in Bi, Tl and Ba. In the present work, the relationship between the total press load and the press load allocated to the anvil face, and the relationship between the total press load and the press load allocated to gaskets are established at room temperature. The results show that with the increase of the total press load, the load allocated to the gaskets is increased sharply, while the curve of load allocated to the anvil face versus total press load reaches a plateau, which results in the cell pressure reaching upper limit when the cell pressure reaches up to about 5 GPa. According to the experimental results, the stress state of the cubic cell under high pressure is analyzed and the reason why the pressure generated in the large volume cubic chamber is difficult to exceed 7 GPa is explained. Based on the geometrical structure of the cubic cell, the scheme to increase the upper pressure limit for cubic cell by using the material with high bulk modulus as the pressure transmitting medium and the material with low bulk modulus as the gasket, is proposed. Additionally, the method of calculating the pressure values at different positions along the axis of symmetry in the cubic cell is given through the quantitative calibration of the pressure gradient in the axial direction of the cubic cell. This method can provide more accurate pressure data for high pressure experiments.

Compressibility of a Natural Kyanite to 17.5 GPa

Thermal Equation of State of a Natural Kyanite Up to 8.55 GPa and 1273 K

Compressibility And Strength Of Nanocrystalline Tungsten Boride Under Compression To 60gpa

Thermal Expansion of Kyanite at Ambient Pressure: an X-ray Powder Diffraction Study Up to 1000 °C

Force Analysis and Pressure Quantitative Measurement for the High Pressure Cubic Cell

Compressional Behavior of Natural Eclogitic Zoisite by Synchrotron X-ray Single-Crystal Diffraction to 34 GPa

Quantitative Measurements of Pressure Gradients for the Pyrophyllite and Magnesium Oxide Pressure-Transmitting Mediums to 8 Gpa in A Large-Volume Cubic Cell

Compressibility of Epidote Up to 20 GPa at 298 K

Synchrotron radiation X-ray diffraction investigation on the compressibility of lizardite

Equation Of State Of A Natural Chromian Spinel At Ambient Temperature

Equation of State, Elasticity, and Shear Strength of Pyrite under High Pressure

Compressibility of a Natural Smithsonite ZnCO3up to 50 GPa

Isothermal Equation of State and Raman spectroscopy of Celestite

Compressional behavior of strontianite SrCO3 by synchrotron X-ray radiation diffraction: effects of pressure transmitting media

In-situ Raman study and phase transition of gypsum under high pressure

In situ determination of the compressibility of synthetic pure zircon (ZrSiO4) and the onset of the zircon-reidite phase transition

High-pressure investigation on prehnite: X-ray diffraction and Raman spectroscopy

Equation of State of Synthetic Qandilite Mg2TiO4 at Ambient Temperature

Compressibilities of MnFe 2 O 4 Polymorphs

Ultrasound Elasticity of Diamond at Gigapascal Pressures

Compressibility of A Natural P4/Nnc Vesuvianite