Tunable aggregation-induced emission of diphenyldibenzofulvenes.

Hui Tong,Yongqiang Dong,Matthias Häussler,Jacky W Y Lam,Herman H-Y Sung,Ian D Williams,Jingzhi Sun,Ben Zhong Tang

DOI: https://doi.org/10.1039/b515798f

IF: 4.9

2006-01-01

Chemical Communications

Abstract:Nonemissive fulvenes can be induced to luminesce by aggregate formation, with the crystalline aggregates emitting bluer lights more intensely than their amorphous counterparts.

What problem does this paper attempt to address?

Aggregation-induced and crystallization-enhanced emissions of 1,2-diphenyl-3,4-bis(diphenylmethylene)-1-cyclobutene.

Yongqiang Dong,Jacky W Y Lam,Anjun Qin,Jiaxin Sun,Jianzhao Liu,Zhen Li,Jingzhi Sun,Herman H Y Sung,Ian D Williams,Hoi Sing Kwok,Ben Zhong Tang

DOI: https://doi.org/10.1039/b704794k

IF: 4.9

2007-01-01

Chemical Communications

Abstract:1,2-Diphenyl-3,4-bis( diphenylmethylene)-1-cyclobutene can be induced to emit efficiently by aggregate formation, with the crystalline aggregates emitting brighter, bluer lights than their amorphous counterparts.
Efficient Light Emitters in the Solid State: Synthesis, Aggregation‐Induced Emission, Electroluminescence, and Sensory Properties of Luminogens with Benzene Cores and Multiple Triarylvinyl Peripherals

Carrie Y. K. Chan,Zujin Zhao,Jacky W. Y. Lam,Jianzhao Liu,Shuming Chen,Ping Lu,Faisal Mahtab,Xiaojun Chen,Herman H. Y. Sung,Hoi Sing Kwok,Yuguang Ma,Ian D. Williams,Kam Sing Wong,Ben Zhong Tang

DOI: https://doi.org/10.1002/adfm.201102030

IF: 19

2011-01-01

Advanced Functional Materials

Abstract:Benzene-cored luminogens with multiple triarylvinyl units are designed and synthesized. These propeller-shaped molecules are nonemissive when dissolved in good solvents, but become highly emissive when aggregated in poor solvents or in the solid state, showing the novel phenomenon of aggregation-induced emission. Restriction of intramolecular motion is identified as the main cause for this effect. Thanks to their high solid-state fluorescence quantum yields (up to unity) and high thermal and morphological stabilities, light-emitting diodes with the luminogens as emitters give sky-blue to greenish-blue light in high luminance and efficiencies of 10800 cd m-2, 5.8 cd A-1, and 2.7%, respectively. The emissions of the nanoaggregates of the luminogens can be quenched exponentially by picric acid, or selectively by Ru3+, with quenching constants up to 105 and similar to 2.0 x 105 L mol-1, respectively, making them highly sensitive (and selective) chemosensors for explosives and metal ions.
Switching the light emission of (4-biphenylyl)phenyldibenzofulvene by morphological modulation: crystallization-induced emission enhancement.

Yongqiang Dong,Jacky W Y Lam,Anjun Qin,Zhen Li,Jingzhi Sun,Herman H-Y Sung,Ian D Williams,Ben Zhong Tang

DOI: https://doi.org/10.1039/b613157c

IF: 4.9

2007-01-01

Chemical Communications

Abstract:(4-Biphenylyl)phenyldibenzofulvene is weakly luminescent in the amorphous phase but becomes highly emissive upon crystallization; this unusual crystallization-induced emission enhancement effect allows its emission to be repeatedly switched between dark and bright states by fuming-heating and heating-cooling processes.
Aggregation-induced Emission of Silole Molecules and Polymers: Fundamental and Applications

Jianzhao Liu,Jacky W. Y. Lam,Ben Zhong Tang

DOI: https://doi.org/10.1007/s10904-009-9282-8

IF: 3.518

2009-01-01

Journal of Inorganic and Organometallic Polymers and Materials

Abstract:Aggregation generally quenches the light emissions of chromophoric molecules. In this review, we demonstrate that 1,1-disubstituted 2,3,4,5-tetraphenyl siloles and 2,5-difunctionalized siloles as well as their polymers exhibit the opposite behaviors. Instead of quenching, aggregation has greatly boosted their photoluminescence quantum yields by up to two orders of magnitude, turning them from faint fluorophores into strong emitters. Such “abnormal” phenomenon of “aggregation-induced emission (AIE)” is attributed to restricted intramolecular rotations of the peripheral phenyl rings against the central silole core, which block the nonradiative channel via the rotational energy relaxation processes and effectively populate the radiative decay of the excitons. Utilizing such a novel effect, siloles and their polymers find an array of applications as: sensors for chemicals, explosives, pH, and biomacromolecules (proteins, DNAs and RNAs), indicators for determining CMC and monitoring layer-by-layer self-assembling, biocompatible fluorogens for cell imaging, visualizing agent for DNA gel electrophoresis, biolabels for immunoassay, stimuli-responsive organic nanomaterials, magnetic fluorescent nanoparticles for potential bio-imaging and -separation, and outstanding materials for efficient OLEDs and PV cells.
Aggregation-Induced Emissions of Tetraphenylethene Derivatives and Their Utilities As Chemical Vapor Sensors and in Organic Light-Emitting Diodes

Yongqiang Dong,Jacky W. Y. Lam,Anjun Qin,Jianzhao Liu,Zhen Li,Ben Zhong Tang

DOI: https://doi.org/10.1063/1.2753723

IF: 4

2007-01-01

Applied Physics Letters

Abstract:Nonemissive tetraphenylethene (TPE) 1 and its diphenylated derivative 2 were induced to emit intensely by aggregate formation. Crystalline aggregates of the dyes emitted bluer lights than their amorphous counterparts. The emissions of the TPE dyes could be switched off and on continuously and reversibly by wetting and dewetting with solvent vapors, respectively, manifesting their ability to optically sense volatile organic compounds. The light-emitting diodes fabricated from 1 and 2 were turned on at ∼2.9 and ∼5V and emitted blue lights with maximum luminance of ∼1800 and ∼11000cd∕m2, respectively.
Aggregation- and Crystallization-Induced Light Emission

Yuning Hong,Yongqiang Dong,Hui Tong,Zhen Li,Matthias Haussler,Jacky Wing Yip Lam,Ben Zhong Tang

DOI: https://doi.org/10.1117/12.707609

2007-01-01

Abstract:A group of organic chromophoric molecules including siloles, pyrans, tetraphenylethylenes and fulvenes, are designed and synthesized. Light emissions of conventional luminescent materials are often quenched by aggregate formation. These molecules, however, become stronger luminophors when aggregated although they are practically nonemissive in their dilute solutions. By varying their packing structures in the aggregation states, emission color ranging from blue to red can be achieved. The emission of falvenes can also be controlled by changing their morphology. While they emit a faint light in the amorphous state, their crystal forms are strongly luminescent. Intermolecular interaction or restriction of intramolecular rotation in different states may be responsible for such behaviors. Thanks to such effects, the molecules can be employed as sensors for the detection of explosives, organic solvent vapors, solution pH, and biomacromolecules. Further modification of their structures by molecular engineering endeavors may generate materials that can find an array of applications in optical display systems and as biological probes.
Aggregation-Induced Emission: Effects of Molecular Structure, Solid-State Conformation, and Morphological Packing Arrangement on Light-Emitting Behaviors of Diphenyldibenzofulvene Derivatives

Hui Tong,Yongqiang Dong,Yuning Hong,Matthias Haussler,Jacky W. Y. Lam,Herman H. -Y. Sung,Xiaoming Yu,Jiaxin Sun,Ian D. Williams,Hoi Sing Kwok,Ben Zhong Tang

DOI: https://doi.org/10.1021/jp0630828

2007-01-01

Abstract:Propeller-shaped molecules diphenyldibenzofulvene (1) and (4-methoxyphenyl)phenyldibenzofulvene (2) were nonemissive when dissolved in good solvents but became luminescent when aggregated in poor solvents or in the solid state, showing a novel phenomenon of aggregation-induced emission (AIE). 8-Phenylbenzo[e]-acephenanthrylene (3), a ring-closed form of 1 with one of its phenyl blades locked, was emissive in the solutions, suggesting that the AIE effects of I and 2 are caused by the restrictions of intramolecular rotations of their aromatic blades in the aggregation state. The crystals of 1 and 2 emitted stronger, bluer lights than their amorphous powders, possibly due to the structural rigidification and conformational twisting of the dye molecules in the crystalline phase. The light-emitting diodes with a device configuration of ITO/NPB/dye/ BCP/Alq(3)/LiF/Al were fabricated, which emitted bluish-green and yellow lights with maximum luminance and current efficiency up to 5000 Cd/m(2) and 1.90 Cd/A, respectively.
Aggregation-induced bathochromic fluorescent enhancement for fluorenone dyes

maosen yuan,xianchao du,fan xu,dongen wang,wenji wang,tianbao li,qin tu,yanrong zhang,zhenting du,jinyi wang

DOI: https://doi.org/10.1016/j.dyepig.2015.08.011

IF: 5.122

2015-01-01

Dyes and Pigments

Abstract:Organic solid-state luminescence materials with aggregation-induced emission enhancement have attracted considerable interest in recent years. In this work, we develop a class of 2,7-diphenylfluorenone derivatives that exhibit prominent aggregation-induced emission properties with high solid-state quantum yields. Their solid-state powders show a ∼160 nm bathochromically shifted fluorescence and longer lifetime compared to their emission in dilute THF solution. The X-ray single structures and photophysical properties reveal that the mechanism of aggregation-induced emission in this class of fluorenone compounds is due to the formation of static excimers through hydrogen bonds in the solid state. The emission of their THF solution peaked at 380 nm and originates from the single molecule and the emission of their solid-state powder peaked at 550 nm originates from the excimers. The aggregation-induced emission properties and luminescence mechanism are further verified by the design of 2,7-diphenylfluorenone-diboronic acid adduct, which exhibited weak luminescence in high pH buffer and red-shifted strong luminescence in acidic buffer.
New Tetraphenylpyridinium-Based Luminogens with Aggregation-Induced Emission Characteristics

ZongTan Wang,Yuan Fang,JingZhi Sun,AnJun Qin,Ben Zhong Tang

DOI: https://doi.org/10.1007/s11426-013-4933-6

2013-01-01

Science China Chemistry

Abstract:The research on aggregation-induced emission (AIE) has drawn increasing interests in the past decade. With the efforts scientists paid, a variety of AIE systems have been developed, among which the tetraphenylethelene and silole derivatives are the most studied. Development of new AIE systems could further enrich the AIE molecules and promote the development of AIE area. In this communication, we prepared a new AIE system based on 1,2,4,6-tetraphenylpyridinium ions according to the restriction of intramolecular rotation mechanism. These molecules could be facilely synthesized via one-step and one-pot reaction. The ionic AIE-active molecules could find wide application in sensing and optoelectronic areas.
Crystallization-Induced Emission Enhancement of A Simple Tolane-Based Mesogenic Luminogen

Jiaqi Tong,Yi Jia Wang,Zhaoyang Wang,Jing Zhi Sun,Ben Zhong Tang

DOI: https://doi.org/10.1021/acs.jpcc.5b06088

2015-01-01

Abstract:The photophysical properties of a diphenylacetylene derivative (FOEB) were investigated. The fluorescence quantum efficiency (Phi(F), %) of FOEB changes from moderate (49%) to low (9%) and to evidently enhanced (60%) in dilute solution, amorphous solid, and crystal state, respectively. This is a typical phenomenon of crystallization-induced emission enhancement (CIEE). The diphenylacetylene luminogen can be viewed as a propeller-like molecule with two blades (phenyl groups). In solution, the intramolecular rotations of the two blades around the ethynyl unit are activated and partially dissipate the energy in the photoexcited state, thereby leading to emission quenching. Consequently, FOEB exhibits moderate Phi(F) in solution. In amorphous solid, the intramolecular rotations are restricted, and a higher Phi(F) could be expected. But in fact, the strong pi-pi interactions between the luminogens cause heavier emission quenching, and the Phi(F) of the molecular aggregates is as low as 9%. In the single crystal, as the crystallographic data revealed, the two phenyl groups in the same diphenylacetylene unit are highly coplanar and the conjugation planes of the adjacent diphenylacetylene units are orthogonal to each other. Such molecular conformation and chromophore packing eliminate the intermolecular pi-pi interaction thereby greatly reducing the pi-pi interaction that caused fluorescence quenching, and meanwhile, the orthogonal packing allows the formation of C-H center dot center dot center dot pi. bonding between the adjacent phenyl groups to lock the intramolecular rotations and retain fluorescence. As a result, the FOEB single crystal shows evidently enhanced emission. Besides the CIEE property, FOEB demonstrates good liquid crystal property due to the diphenylacetylene mesogen and solvatochromic and mechnochromic effects due to the modification of diphenylacetylene with introduction of electron donor and acceptor functionalities.
Pyrene-Based Red-Emitting Aggregation-Induced Emission Luminogens: from Structural Construction to Anti-Counterfeiting Applications

Hualong Li,Zeng-Min Xue,Guang Yang,Fei Meng,Hongtao Lin,Wen-Xuan Zhao,Shuhai Chen,Chuan-Zeng Wang

DOI: https://doi.org/10.1039/d4qm00927d

IF: 8.6834

2025-01-01

Materials Chemistry Frontiers

Abstract:Herein, we demonstrated a novel approach to construct pyrene-based high efficiency red color emission molecules. Both luminogens present obvious aggregation−induced enhanced emission (AIEE) properties and distinct mechanochromic behavior with a...
N-type pyrazine and triazole-based luminogens with aggregation-enhanced emission characteristics

ming chen,lingzhi li,han nie,yang shi,ju mei,jian wang,jing zhi sun,anjun qin,ben zhong tang

DOI: https://doi.org/10.1039/c5cc03181h

IF: 4.9

2015-01-01

Chemical Communications

Abstract:N-type pyrazine-based 1,4- and 1,5-disubstituted 1,2,3-triazole derivatives, showing unique aggregation-enhanced emission characteristics, were facilely prepared via Cu- and Ru-catalysed azide-alkyne cycloadditions, respectively. Thanks to their electron-deficient properties, they could readily form red-emissive charge transfer complexes with electron-donating triphenylamine in the aggregate and solid states.
Aggregation-Induced Emission, Self-Assembly, And Electroluminescence Of 4,4 '-Bis(1,2,2-Triphenylvinyl)Biphenyl

Zujin Zhao,Shuming Chen,Xiaoyuan Shen,Faisal Mahtab,Yong Yu,Ping Lu,Jacky W. Y. Lam,Hoi Sing Kwok,Ben Zhong Tang

DOI: https://doi.org/10.1039/b915271g

2010-01-01

Abstract:Two is better than one: a luminogen comprised of two units of tetraphenylethene (BTPE) emits more efficiently than that with one tetraphenylethene unit in the solid state; self-assembly of the BTPE molecules affords crystalline microfibers that fluoresce in 100% efficiency, giving the largest effect of aggregation-induced emission (alpha(AIE) -> infinity); BTPE-based electroluminescence devices emit in current efficiency up to similar to 7.3 cd/A.
Tuning the Electronic Nature of Aggregation-Induced Emission Luminogens with Enhanced Hole-Transporting Property

Yang Liu,Shuming Chen,Jacky W. Y. Lam,Ping Lu,Ryan T. K. Kwok,Faisal Mahtab,Hoi Sing Kwok,Ben Zhong Tang

DOI: https://doi.org/10.1021/cm2003269

IF: 10.508

2011-01-01

Chemistry of Materials

Abstract:Triphenylamine (TPA) is a well-known hole-transporting material but suffers aggregation-caused emission quenching in the solid state. Tetraphenylethene (TPE), on the other hand, is an archetypal luminogen that shows the phenomenon of aggregation-induced emission (AIE). In this work, TPA is attached to the TPE core as peripheral group to generate new AIE luminogens with enhanced hole-transporting property. The TPA-TPE adducts, named 1[4'-(diphenylamino)biphenyl-4-yl]-1, 2,2-triphenylethene (TPATPE) and 1,2-bis[4'-(diphenylamino)biphenyl-4-yl]-1,2-diphenylethene (2TPATPE) are synthesized in satisfactory yields by Suzuki coupling of 4-(diphenylamino)phenylboronic acid with 1-(4-bromophenyl)-1,2,2-triphenylethene and 1,2-bis(4-bromophenyl)-1,2-diphenylethene, respectively. Whereas the hybrid molecules are practically nonluminescent in the solution state, their aggregates in poor solvents and thin films emit intensely with fluorescence quantum yields up to 100%. Both TPATPE and 2TPATPE are thermally and morphologically stable, showing high thermal-degradation (T-d up to 430 degrees C) and glass transition (T-g = 119 degrees C) temperatures. Multilayer electroluminescence (EL) devices are constructed, which emit sky blue and green EL with maximum luminance of 32230 cd/m(2) and current efficiency up to 13.0 cd/A The devices without hole-transporting layers (HTL) show performances comparable to or better than those with HTL, presumably because of the high hole mobility of TPATPE and 2TPATPE coupled with the matching of their energy levels with the anode.
Aggregation-induced emission: mechanistic study of the clusteroluminescence of tetrathienylethene

Lucia Viglianti,Nelson L. C. Leung,Ni Xie,Xinggui Gu,Herman H. Y. Sung,Qian Miao,Ian D. Williams,Emanuela Licandro,Ben Zhong Tang

DOI: https://doi.org/10.1039/c6sc05192h

IF: 8.4

2017-01-01

Chemical Science

Abstract:Crystallization induced S⋯S interactions leading to an unusual luminescent phenomenon.
Synthesis of blue light emitting bis(triphenylethylene) derivatives: A case of aggregation-induced emission enhancement

Xiqi Zhang,Zhenguo Chi,Bingjia Xu,Haiyin Li,Zhiyong Yang,Xiaofang Li,Siwei Liu,Yi Zhang,Jiarui Xu

DOI: https://doi.org/10.1016/j.dyepig.2010.09.003

IF: 5.122

2011-01-01

Dyes and Pigments

Abstract:A series of new aggregation-induced emission enhancement derivatives from bis(triphenylethylene) with strong blue-light-emitting properties and high thermal stability have been synthesized. Their maximum fluorescence emission wavelengths range between 464–468nm, with fluorescence quantum yields of 0.58–0.88. Their glass transition temperatures range from 125°C to 178°C. The obtained experimental results demonstrate the different aggregation-induced emission enhancement phenomena caused by the effect of solvent and formation of both H- and J- aggregation states. An emitting device was fabricated using a bis(triphenylene) derivative in the emitting layer which exhibited a luminance efficiency of up to 2cd/A with a maximum brightness of 548cd/m2.
Aggregation-Induced Emissions of Pyran, Fulvene and Silole Derivatives

Hui Tong,Yongqiang Dong,Matthias Haussler,Jacky W. Y. Lam,Ben Zhong Tang

2006-01-01

Abstract:Novel pi-conjugated molecules of 4H-pyran (1), fulvene (2), and silole (3) derivatives are designed and synthesized. Unlike conventional luminescent molecules, 1-3 are virtually nonluminescent in dilute solutions but become highly emissive with a dramatic boost in the luminescence efficiency upon aggregate formation (hence "aggregationinduced emission" or AIE). Their emissions on the TLC plates are quenched upon exposure to solvent vapors but become visibly emissive again when the solvents are removed. This process is reversible and can be repeated many times. The AIE processes of 1 and 2 are believed to be caused by intermolecular interaction, while that of 3 might be due to restriction of its molecular motions. Interesting fluorescence vapochromism is observed for a thin film of 3.
Facile synthesis of a new class of aggregation-induced emission materials derived from triphenylethylene

Bingjia Xu,Zhenguo Chi,Zhiyong Yang,Jingbo Chen,Shaozhi Deng,Haiyin Li,Xiaofang Li,Yi Zhang,Ningsheng Xu,Jiarui Xu

DOI: https://doi.org/10.1039/c0jm00229a

2010-01-01

Journal of Materials Chemistry

Abstract:A series of new aggregation-induced emission compounds with strong blue light-emitting properties derived from triphenylethylene were facilely synthesized by a Wittig-Horner reaction of bis(4-bromophenyl) methanone with diethyl 4-bromobenzylphosphonate, followed by a Suzuki reaction with arylboronic acids. Their maximum fluorescence emission wavelengths were 452-462 nm. The glass transition temperatures ranged from 70-145 degrees C, and the decomposition temperatures were 360-508 degrees C. The unoptimized device fabricated with benzofuranyl substituted compound as emitter turned on at similar to 6 V, and the maximum luminance was similar to 1500 cd m(-2).
Aggregation-induced Emission, Mechanochromism and Blue Electroluminescence of Carbazole and Triphenylamine-Substituted Ethenes

Carrie Y. K. Chan,Jacky W. Y. Lam,Zujin Zhao,Shuming Chen,Ping Lu,Herman H. Y. Sung,Hoi Sing Kwok,Yuguang Ma,Ian D. Williams,Ben Zhong Tang

DOI: https://doi.org/10.1039/c4tc00097h

IF: 6.4

2014-01-01

Journal of Materials Chemistry C

Abstract:Carbazole and triphenylamine-substituted ethenes are synthesized [Ph2CCPh(R), R = 9-carbazolyl, 9-hexyl-3-carbazolyl and 4-(diphenylamino)phenyl] and their optical properties are investigated. All luminogens are nonemissive when molecularly dissolved in good solvents but become highly emissive in the aggregated state, showing a phenomenon of aggregation-induced emission. High solid-state fluorescence quantum yields up to 97.6% have been achieved in their solid thin films. The luminogens are thermally stable, showing high degradation temperatures of up to 315 °C. They exhibit mechanochromism: their emissions can be repeatedly switched between blue and green colors by simple grinding–fuming and grinding–heating processes due to the morphological change from crystalline to amorphous state and vice versa. Multilayer light-emitting diodes with device configurations of ITO/NPB/dye/TPBi/Alq3/LiF/Al, ITO/NPB/dye/TPBi/LiF/Al and ITO/dye/TPBi/LiF/Al are fabricated, which emit sky blue light with maximum luminance, current efficiency, power efficiency and external quantum efficiency of 11 700 cd m−2, 7.5 cd A−1, 7.9 lm W−1 and 3.3%, respectively.
Pyrene-fused hexaarylbenzene luminogens: Synthesis, characterization, and aggregation-induced emission enhancement

Chuan-Zeng Wang,Ze-Dong Yu,Wen-Xuan Zhao,Kai Yang,Yuki Noda,Yi Zhao,Xing Feng,Mark R.J. Elsegood,Simon J. Teat,Carl Redshaw,Takehiko Yamato

DOI: https://doi.org/10.1016/j.dyepig.2021.109452

IF: 5.122

2021-08-01

Dyes and Pigments

Abstract:Six novel pyrene-fused hexaarylbenzene derivatives (3a-f) were designed, synthesized, and characterized, which exhibited aggregation-induced emission enhancement (AIEE) in the aggregated state by means of THF/H2O mixtures. Techniques such as theoretical calculations, single crystal X-ray diffraction, and photophysical measurements in solution and in the solid state were employed to illustrate the tunable, variable, and sensitive AIEE features in this system. Both theoretical and experimental results revealed that the nature of the multiple photoluminescence should be taken into account when elucidating and designing multiple photoluminescence phenomenon and molecules.

engineering, chemical,chemistry, applied,materials science, textiles

Tunable aggregation-induced emission of diphenyldibenzofulvenes.

Aggregation-induced and crystallization-enhanced emissions of 1,2-diphenyl-3,4-bis(diphenylmethylene)-1-cyclobutene.

Efficient Light Emitters in the Solid State: Synthesis, Aggregation‐Induced Emission, Electroluminescence, and Sensory Properties of Luminogens with Benzene Cores and Multiple Triarylvinyl Peripherals

Switching the light emission of (4-biphenylyl)phenyldibenzofulvene by morphological modulation: crystallization-induced emission enhancement.

Aggregation-induced Emission of Silole Molecules and Polymers: Fundamental and Applications

Aggregation-Induced Emissions of Tetraphenylethene Derivatives and Their Utilities As Chemical Vapor Sensors and in Organic Light-Emitting Diodes

Aggregation- and Crystallization-Induced Light Emission

Aggregation-Induced Emission: Effects of Molecular Structure, Solid-State Conformation, and Morphological Packing Arrangement on Light-Emitting Behaviors of Diphenyldibenzofulvene Derivatives

Aggregation-induced bathochromic fluorescent enhancement for fluorenone dyes

New Tetraphenylpyridinium-Based Luminogens with Aggregation-Induced Emission Characteristics

Crystallization-Induced Emission Enhancement of A Simple Tolane-Based Mesogenic Luminogen

Pyrene-Based Red-Emitting Aggregation-Induced Emission Luminogens: from Structural Construction to Anti-Counterfeiting Applications

N-type pyrazine and triazole-based luminogens with aggregation-enhanced emission characteristics

Aggregation-Induced Emission, Self-Assembly, And Electroluminescence Of 4,4 '-Bis(1,2,2-Triphenylvinyl)Biphenyl

Tuning the Electronic Nature of Aggregation-Induced Emission Luminogens with Enhanced Hole-Transporting Property

Aggregation-induced emission: mechanistic study of the clusteroluminescence of tetrathienylethene

Synthesis of blue light emitting bis(triphenylethylene) derivatives: A case of aggregation-induced emission enhancement

Aggregation-Induced Emissions of Pyran, Fulvene and Silole Derivatives

Facile synthesis of a new class of aggregation-induced emission materials derived from triphenylethylene

Aggregation-induced Emission, Mechanochromism and Blue Electroluminescence of Carbazole and Triphenylamine-Substituted Ethenes

Pyrene-fused hexaarylbenzene luminogens: Synthesis, characterization, and aggregation-induced emission enhancement