Abstract:As increasing fiber hydrophobicity can significantly improve the paper dewatering process, we found that replacing SBKP and HBKP with 0.5% superhydrophobic CPGMA can significantly improve the dewatering of paper sheets. Therefore, it can be concluded that if CPGMA has little effect on paper properties, it will have potential industrial value in the papermaking industry. Consequently, it is necessary to further study the effect of the CPGMAs@CPAM/SiO2/APAM system on paper properties. To evaluate the application potential of the system in the papermaking industry, we investigated the effects of CPGMAs, which replaced the fibers in the stocks, on the paper properties in the CPAM/SiO2/APAM system. The findings demonstrate that as the CPGMA replacement increased, the paper's tensile strength, bursting strength, tear resistance, and folding endurance all declined. The trend can be segmented into two phases: a rapid decrease for substitution amounts below 0.5% and a gradual decline for substitution amounts exceeding 0.5%. When replaced with a small amount of CPGMAs, there was a negligible effect on these properties. Second, the paper air permeability increased with the CPGMA substitution amount in the stock. Furthermore, the trend of paper air permeability can be divided into two stages—a rapid stage with a substitution amount of 0.5%. A small amount of CPGMAs could distinctly improve the paper's air permeability. Third, CPGMAs, which replaced fibers in the stock, minutely affected the paper formation. A small amount of CPGMAs substantially boosted the efficacy of the process of paper manufacture and certain characteristics of the paper, and it had a negligible impact on the strength of paper. The CPGMAs@CPAM/SiO2/APAM technology has the potential to improve the retention and filtration performance of CPAM/SiO2/APAM.

The Rheological Properties of Cationic Polyacrylamide Diluted by Dilution Using Pulps Onto Wire

Properties of Retention and Drainage for Cationic Polyacrylamide Based on Water Dilution Using Pulps

Application of Cationic Polyacrylamide as Retention and Drainage Aids in Bleached Wheat Straw Pulp

Effect of Sheet Properties of Cellulosic Polyglycidyl Methacrylate-Grafted Fibers in a Cationic Polyacrylamide/SiO2/Anionic Polyacrylamide Retention Aid System

Research on Strengthening Effect of Cationic Polyacrylamide Emulsion toward Wood Pulp

Effects of Polyacrylamide on Retention of Fines in Corrugated Medium Paper and Properties of the Paper

Preparation and Application of the Water-in-water type CPAM Emulsion as the Strengthening Agent

Synthesis And Characteristic Of Xylan-Grafted-Polyacrylamide And Application For Improving Pulp Properties

Synthesis Of Cationic Guar Gum-G-Acrylamide Copolymer At Low Temperature And Its Applications As Papermaking Additives

Rheological properties of two high polymers suspended in an abrasive slurry jet

Dual Polymer Conditioning of Sludge from Wastewater Treatment in Paper Mills Using Waste Paper As Raw Materials

Rheology and Thixotropy of Cement Pastes Containing Polyacrylamide

Rheological properties of cationic polyacrylamide solution

Influences of Different Rheological Agent on the Rhology Behavior of Coatings

Rheological behavior and cell morphology of foamed waste paper pulp/ high density polyethylene composites

Effects of CPAM/APAM Compound on Paper Strength

Study on Retention and Drainage of Cationic Polymeric Microparticles

Swelling properties of particles in amphoteric polyacrylamide dispersion

Effect of Chemical Additives Dissolution with Whitewater on Retention

Rheological behavior and cell morphology of foamed waste paper pulp/HDPE composites

Effect of chitosan and cationic polyacrylamide on optical and mechanical properties of paper made from chemi-mechanical pulps