Abstract:The central deformation extent of the thick plate can be improved and the approaching uniform deformation will be realized by the snake/gradient temperature rolling (SGTR). At present, the existing rolling force analytical models cannot be directly used for SGTR because of the great difference with the synchronous rolling. The rolling force model should be established so as to meet the production demand of the SGTR with different roll diameters. The thick plate is divided into three layers according to the numerical results of the short-term ultra-fast cooling for the thick plate. The deformation region is simplified into different zones and layers according to the temperature gradient and neutral point position. The traditional von Mises yield criterion was optimized by the introduced coefficients c1 and c2 according to the slip line field theory to correct the deviation caused by the uniform and shear stress assumption. The specific pressure equation is established by the slab method. The deformation region with different composition cases is analyzed, and the rolling force and torque analytical models are established according to the boundary conditions on this basis. The short-term ultra-fast cooling and rolling process were simulated by ANSYS software. The deformation resistance gradient produced by short-term ultra-fast cooling and roll diameter ratio are the main factors to affect the rolling force, while the roll offset has little effect on the rolling force because of its small proportion in the deformation region. The position of neutral points not only affects the rolling torque, but also changes its direction in certain conditions. The model precision was analyzed, and the rolling force calculated by the established analytic model is in good agreement with the numerical method, which serves as a theoretical basis for the rolling mill design and process parameter setting.

Rolling Force Prediction for Strip Casting Using Theoretical Model and Artificial Intelligence

Fusion of theory and data-driven model in hot plate rolling: A case study of rolling force prediction

Adaptive learning prediction on rolling force in the process of reversible cold rolling mill

Study on the Prediction of Rolling Force of 16mnr Hot Rolled Plate

Research progress and intelligent trend of accurate modeling of rolling force in metal sheet

Accurate prediction algorithm of rolling force in slab gradient temperature rolling process

AI-assisted prediction of St14 steel sheets formability: Neural-fuzzy systems and crystal plasticity assessments

Research on the Prediction of Roll Wear in a Strip Mill

The Coupling Machine Learning for Microstructural Evolution and Rolling Force During Hot Strip Rolling of Steels

The Prediction of Flow Stress in the Hot Compression of a Ni-Cr-Mo Steel Using Machine Learning Algorithms

Analytical and Finite Element Analysis of the Rolling Force for the Three-Roller Cylindrical Bending Process

Predicting mechanical properties lower upper bound for cold-rolling strip by machine learning-based artificial intelligence

Industrial Big Data‐Driven Modeling and Prediction for Hot‐Rolled Strip Crown with Multigrade and Multispecification Data

Analysis of Feasibility for Rolling Force Model Optimization of Hot Strip Mill of Jinan Iron & Steel Group Corporation

Rolling force prediction based on wavelet transform and RBF neural network

Machine Learning-Based Generalized Model for Finite Element Analysis of Roll Deflection During the Austenitic Stainless Steel 316L Strip Rolling

Analysis of rolling force and layer thickness in bimetal clad rolling

High Dimensional Data-driven Optimal Design for Hot Strip Rolling of C–Mn Steels

Roll force prediction by combined FEM and ANN in the hot rolling process under nano-lubrication condition

Research on Rolling Moment Prediction of 4300 Mm Width Plate Rolling Finishing Mill with Natural Networks

Calculation and analysis of rolling force during aluminum alloy thick plate snake/gradient temperature rolling with different roll diameters