Measurement of Refrigerator Cooling Capacity Loss and Improvement of Its Thermal Insulation
Peng He,Quanxin Nian,Wenzhen Fang,Wenquan Tao
DOI: https://doi.org/10.3969/j.issn.0253-4339.2017.03.070
2017-01-01
Abstract:In the present paper, the cold loss of a fridge when unloaded was studied through an experiment, and an improvement was pro-posed. First, the heat transfer process between the fridge interior and the external environment was simplified into a one-dimensional heat conduction process. On an all-weather simulation experiment platform, to investigate the effect of ambient temperature on cooling capacity loss, the ambient temperature was set to 5, 10, 15, 20, 25, 30, 35, and 40℃ with a fixed ambient relative humidity of 80%. To inves-tigate the effect of ambient humidity on cooling capacity loss, the ambient relative humidity was set to 55%, 65%, 75%, 85%, and 95% with a fixed ambient temperature of 25℃. The temperature of the inner and outer walls for every combination of the above two series of parameters was measured when the refrigerator was unloaded. According to the Fourier heat conduction law, the heat flux of each wall can be obtained, and then the cold loss is calculated. The results show that the cold loss of the refrigerator increases with ambient temper-ature, and the ambient humidity has no effect on cooling capacity loss. The cold loss of the refrigerator back wall is obviously greater than that of the other walls, while that of the top wall is smaller. The insulation of the refrigerator back wall is thickened to decrease the entire cold loss, and the insulation of the refrigerator top wall is made thinner to guarantee the refrigerator storage capacity. This leads to an ap-proximately uniform cold loss distribution of the refrigerator walls.