Abstract:Silicon-based materials have become one of the most likely materials to replace graphite anodes of Li-ion batteries due to their ultra-high theoretical specific capacity, safe lithium intercalation potential, and abundant reserves. However, the large volume effect of silicon-based materials during cycling has become a serious obstacle to their commercial application. Silicon-metal composite is one of the potential solutions to alleviate the volume effect of silicon-based anode. Traditional electrodes are prepared by slurry coating method, and the electrodes crack and fall off after many cycles, resulting in capacity loss. In this paper, a cold spraying method combined with ball milling was proposed to prepare silicon-copper composite electrodes to improve the bonding between electrode materials and the cycling stability of the electrodes. Composite powders with different component ratios were first prepared. Then, the micromorphology, bond strength, thermal conductivity, and electrochemical performance of the electrodes prepared by the slurry coating method and the cold spray method were analyzed, respectively. The results show that the Cu 100- x Si x cold sprayed electrodes have higher bond strength and porosity, while the higher porosity of the cold-sprayed electrodes does not promote heat transfer. After the addition of conductive carbon black, the electrodes exhibit better structural stability, cycling performance, capacity retention, and reaction kinetics, with the Cu 80 Si 20 + SP cold prayed electrode exhibiting 600 mAh g −1 after 200 cycles. This work not only successfully prepared a silicon-copper composite anode with excellent performance but also provided a reference for the preparation of other composite electrodes by cold spray combined with ball milling.

Electrospinning Preparation of Nanosilicon/Disordered Carbon Composite As Anode Materials in Li-Ion Battery

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

A Novel Carbon–silicon Composite Nanofiber Prepared Via Electrospinning As Anode Material for High Energy-Density Lithium Ion Batteries

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Si/C composite nanofibers with stable electric conductive network for use as durable lithium-ion battery anode

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Pyrolytic Carbon-Coated Silicon/carbon Nanofiber Composite Anodes for High-Performance Lithium-Ion Batteries

Homogeneous encapsulation of Si/SnO 2 nanospheres in tunable carbon electrospinning nanofibers for high-performance lithium-ion battery

Silicon/Carbon Nanoparticles Assembled with Multifunction Carbon Nanotubes/Sheets as High-Performance Anode of Lithium-Ion Batteries

Optimal Quantity of Nano-Silicon for Electrospun Silicon/Carbon Fibers as High Capacity Anodes

g-C3N4 integrated silicon nanoparticle composite for high-performance Li-ion battery anodes

Gelatin and sodium alginate derived carbon/silicon composites as high-performance anode materials for lithium-ion batteries

Porous Carbon-Coated Silicon Composites for High Performance Lithium-Ion Batterie Anode

Si/C nanocomposite anode materials by freeze-drying with enhanced electrochemical performance in lithium-ion batteries

Electrospun core-shell silicon/carbon fibers with an internal honeycomb-like conductive carbon framework as an anode for lithium ion batteries

Nano-silicon Embedded in Mildly-Exfoliated Graphite for Lithium-Ion Battery Anode Materials

Fabrication of Tin-Carbon Composite Anode Material by Electrospinning and Electrostatic Spray Deposition for Lithium Rechargeable Battery

Electrospinning synthesis of C/Fe3O4 composite nanofibers and their application for high performance lithium-ion batteries

Fabrication of Graphene Nanoplatelets-Supported Siox-Disordered Carbon Composite and Its Application in Lithium-Ion Batteries

Self-Assembly of Silicon@Oxidized Mesocarbon Microbeads Encapsulated in Carbon as Anode Material for Lithium-Ion Batteries

Preparation of Si-Based Composite Anode for Li-Ion Batteries by Cold Spraying and Its Electrochemical Performance