Abstract:The end-effector of the large space manipulator is employed to assist the manipulator in handling and manipulating large payloads on orbit. Currently, there are few researches about the end-effector, and the existing end-effectors have some disadvantages, such as poor misalignment tolerance capability and complex mechanical components. According to the end positioning errors and the residual vibration characters of the large space manipulators, two basic performance requirements of the end-effector which include the capabilities of misalignment tolerance and soft capture are proposed. And the end-effector should accommodate the following misalignments of the mechanical interface. The translation misalignments in axial and radial directions and the angular misalignments in roll, pitch and yaw are ±100 mm, 100 mm, ±10o, ±15o, ±15o, respectively. Seven end-effector schemes are presented and the capabilities of misalignment tolerance and soft capture are analyzed elementarily. The three fingers-three petals end-effector and the steel cable-snared end-effector are the most feasible schemes among the seven schemes, and they are designed in detail. The capabilities of misalignment tolerance and soft capture are validated and evaluated, through the experiment on the micro-gravity simulating device and the dynamic analysis in ADAMS software. The results show that the misalignment tolerance capabilities of these two schemes could satisfy the requirement. And the translation misalignment tolerances in axial and radial directions and the angular misalignment tolerances in roll, pitch and yaw of the steel cable-snared end-effector are 30mm, 15mm, 6o, 3o and 3o larger than those of the three fingers-three petals end-effector, respectively. And the contact force of the steel cable-snared end-effector is smaller and smoother than that of the three fingers-three petals end-effector. The end-effector schemes and research methods are beneficial to the developments of the large space manipulator end-effctor and the space docking mechanism.

Comprehensive Analysis and Evaluation on Performance of Space Grappling Device

Research on Grapple Strategy and Dynamic Model of Snare Space Grapple Device

Practical Application and Research Advances of Long-Span Space Structures

Kinematic Analysis of the Deployable Truss Structures for Space Applications

Capture Phase Dynamic Model for a Space Grappling Device with Flexible Capture Mechanism

Analysis of Objective Performance Metrics for Space Manipulator Teleoperation

Grasping Control of Space Robot for Capturing Floating Target

Study on Space Tether Retrieval Theory and Technology of Tethered Combination

Space Cable-Strut Deployable Articutlated Mast Design and Experimental Study

Dynamic Modeling of the Capture Process of Snare Space Grapple Device

One-DOF six-bar space gripper with multiple operation modes and force adaptability

Design Schemes and Comparison Research of the End-Effector of Large Space Manipulator

Design of Space Robotic Arm-Hand System and Operation Research

A review of the end-effector of large space manipulator with capabilities of misalignment tolerance and soft capture

STUDY ON THE NON-SMOOTH MECHANICAL MODELS AND DYNAMICS FOR SPACE DEPLOYABLE MECHANISMS

Study on Synthetic Evaluation of Human Performance in Manually Controlled Spacecraft Rendezvous and Docking Tasks

Thermal-Mechanical Coupling Analysis and Structural Optimization of a Deployable Grasping Manipulator

Understanding the True Dynamics of Space Manipulators from Air-Bearing Based Ground Testing

Misalignment Tolerance Analysis and Verification of Space Reusable Lock and Separation Device

Design and workspace analysis of a cable-driven space capture robot for noncooperative targets

Dynamics and Analysis for Gravitational Effects on Space Multi-rigid-Body System