Abstract:ZrO2 based thermal barrier coatings prepared using plasma spraying are frequently modified by mixing some kinds of additives such Al2O3, in order to improve their oxygen ion resistance. Using gas tunnel type plasma spraying, characterized by higher plasma temperature and better stability than traditional arc plasma spraying, zirconia based composite coatings with various mixing ratios of alumina were used to generate graded-functional microstructures. Because of the plasma stability, the coating micro-structural parameters such as the thickness, mixing ratio of alumina and porosity were well reproduced by keeping the spraying parameter constant. A group of coating samples was prepared in this research to be almost the same thickness but different composition ratios. The surface and cross-sectional morphologies of the coatings were examined by SEM (Scanning Electron Microscope) and OM (Optical Microscopy). The coating thickness was measured and the alumina content ratio was assessed from the SEM photos, while the coating porosity (the porosity profile over the cross-section and the average porosity) was obtained from the image analysis of the optical photos. The coating hardness was measured with a micro Vicker hardness tester and the thermal conductivity was measured based on the principle of steady heat flux between two parallel hot plates. The results showed that the addition of alumina increased the coating hardness and lowered the coating porosity, while not reducing the thermal resistance of the coating layers.

Relationship Between Thermal Conductivity Of Nano-Zirconia Coating And Parameters Of Plasma Spraying

Structure Dependence of Thermal Conductivity of Plasma-Sprayed Zirconia Coatings

Microstructure characterization and thermal conductivity analysis of plasma sprayed ZrO 2 coatings

Grain Size and Thermal Conductivity of Nano-Zirconia Thermal Barrier Coating

Research on the Structure of Nanostructured Zirconia Coatings Deposited by Plasma Spraying

Mechanical Properties Of Nanostructured Zirconia Coatings Fabricated By Air Plasma Spraying

RELATION BETWEEN MICROSTRUCTURE AND THERMAL CONDUCTIVITY OF PLASMA-SPRAYED 8YSZ COATING

Study on Wear Resistance and Spraying Process of Nano-ZrO2 Powder Plasma Spraying Coating

Study on performance of nano-zirconia coating deposited by plasma spraying

Microstructure of Nano-structured ZrO2 Function Graded Thermal Barrier Coating Prepared by Atmospheric Plasma Spraying

Microstructure Analyses and Thermophysical Properties of Nanostructured Thermal Barrier Coatings

Study on Fabrication of Zirconia Nanopowder Plasma-Sprayed Coating

Microstructure and thermal properties of nanostructured lanthana-doped yttria-stabilized zirconia thermal barrier coatings by air plasma spraying

Thermal Conductivity of the ZrO2 Based Composite Coatings Prepared by Gas Tunnel Type Atmospheric Plasma Spraying

Relationship Between the Interlamellar Bonding and Properties of Plasma-Sprayed Y2O3-ZrO2 Coatings

Mierostrueture and Performance of Plasma Sprayed Nano Zireonia Coating

Effect of thermal treatment on the grain growth of nanostructured YSZ thermal barrier coating prepared by air plasma spraying

Comparison of Thermal Insulation Capability Between Conventional and Nanostructured Plasma Sprayed YSZ Coating on Ni 3 Al Substrates

Influence of Microstructure on Thermal Conductivity of Plasma-Sprayed YSZ Coating

The Investigation of the Zirconium Silicate Coatings Prepared by APS