Synthesis of Aromatic Polyimides Based on 3,4′-Oxydianiline by One-Pot Polycondensation in Molten Benzoic Acid and Their Application as Membrane Materials for Pervaporation
Anastasiia E. Soldatova,Regina N. Shamsutdinova,Tatiana V. Plisko,Katsiaryna S. Burts,Anna Yu. Tsegelskaya,Dmitry A. Khanin,Kristina Z. Monakhova,Tikhon S. Kurkin,Alexandr V. Bildyukevich,Alexander A. Kuznetsov
DOI: https://doi.org/10.3390/ma15196845
IF: 3.4
2022-10-03
Materials
Abstract:A series of aromatic polyimides based on the asymmetrical diamine 3,4ʹ-oxydianiline and various tetracarboxylic acid dianhydrides, both "rigid" and "flexible" structure, have been synthesized using the original method of one-pot high-temperature catalytic polycondensation in molten benzoic acid. The synthesized polyimides were investigated using fourier-transform infrared (FTIR) and 1H NMR spectroscopy, gel permeation chromatography (GPC), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), thermomechanical analysis (TMA) and wide-angle X-ray scattering (WAXS). It was found that the synthesized polyimides, depending on the used dianhydride, are characterized by different solubility in organic solvent and molten benzoic acid, molecular weight, glass transition temperature (Tg) from 198 to 270 °C, an amorphous or semi crystalline structure with the degree of crystallinity from 41 to 52%. The influence of the method of synthesis on the formation of the crystalline phase of polyimides was studied, and the obtained results were compared with the literature data. The effect of dianhydride chemical structure on the performance of polyimide in pervaporation more specifically, dehydratation of azeotropic isopropanol solution was investigated and compared with the commercially available polyetherimide Ultem 1000TM. Membrane structure was studied using scanning electron microscopy. It was found that polyimide PI-DA is the most effective for separation of 88 wt.% isopropanol/12 wt.% water mixture compared to the polyimide PI-6FDA and commercial polyetherimide Ultem 1000TM demonstrating normalized permeation flux of 2.77 kg μm m−2 h−1 and separation factor of 264 (water content in permeate 97 wt.%).
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering