Abstract:Nowadays, pumps of different size are needed for a great variety of purposes. In the past, both computational fluid dynamics (CFD) and experimental flow visualization were performed to reveal flow characteristics within centrifugal pumps, to examine a specific design and to guide design improvement (see Burgreen et al. 1996, 2000). Li et al. (2007) studied the interior viscous flow in a mini pump with an asymmetric axis using CFD and PIV (particle image velocimetry) for improvement of the pump design. Matsui et al. (2002) adopted the the k-ω model in the CFD simulation for a centrfugal pump, and the computational grid system only consisted of one flow passage for LDV (laser Dopler velocimetry) test impeller. Byskov et al. (2003a) and Pedersen & Larsen (2003 b) investigated the flow inside the rotating passages of a six-bladed shrouded centrifugal pump impeller using LES simulation and PIV and LDV measurements. The velocities predicted with LES were in good agreement with the experimental data. The two RANS simulations were, however, not able to predict this complex flow field. It was thus found that using LES for analyzing the flow field in centrifugal pumps could shed light on basic fluid dynamic with a satisfactory accuracy compared to experiments. A transient simulation was used to study the effects of pulsatile blood flow due to the heartbeat through blood pumps by Song et al. (2003). The microsized geometry of the pump made the choice of turbulence models significant for the accuracy of calculation. The comparison showed that the k-ω model gave better predictions of the shear level within the near wall regions than the k-e model. Guleren and Pinarbasi (2004) indicated that the stallcell size extended from one to two diffuser passages. Comparisons of the computational results with experimental data were made and showed good agreement. The unsteady flow in a low specific speed radial diffuser was simulated by the CFD code CFX-10 by Feng et al. (2009). The PIV and LDV measurements had been conducted to validate the CFD results. Both the phase-averaged velocity fields and the turbulence fields obtained from different methods are presented and compared. In this study, in order to get more information about the internal flow of a centrifugal pump, both experimental measurement and numerical simulation are engaged. A centrifugal model pump test rig is built for PIV measurement. The test, involving the technology of index match and fluorescent, is for acquiring flow pattern in a fixed rotational speed, the velocity distribution of the flow field are thus obtained. And, the RANS (Reynolds

Full-3D Numerical Simulation of Turbulent Flow in the Centrifugal Pump with Split Blades

Numerical Simulation of Flow in Centrifugal Pump with Complex Impeller

Three-dimensional Numerical Simulation of the Internal Flow in the Centrifugal Fan

Numerical simulation of internal flow in forward-curved centrifugal fan

Analysis of flow characteristics in the volute casing of centrifugal pump based on numerical simulation

Large-Eddy Numerical Simulation of Three-Dimension Flow in Centrifugal Pump

Numerical Simulation on Internal Flow in the Screw Centrifugal Pulp Pump

Numerical Simulation of Inner Flow Field in Centrifugal Impeller with Long, Middle and Short Blades

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

3-D Steady Turbulence Flow Numerical Simulation on the Full Passage of a Counter-Rotating Axial Flow Pump

3-D Numeric Analysis on Flow Field in Submersible Centrifugal Pump with Cylindrical Blades

Numerical Study of the Steady Turbulent Flow in a Double Volute

Numerical Simulation on the Steady and Unsteady Internal Flows of a Centrifugal Pump

The 3D Numerical Simulation and Analysis on Internal Flow Field in Centrifugal Pump

Numerical Simulation of 3-D Steady Turbulent Flow in a Double Channel Impeller

Numerical Simulation of Flow in Semi-Open Centrifugal Impeller with Long-Short Blade

Numerical Simulation and Analysis of Unsteady Flow Characteristics in Centrifugal Pump Volute

Numerical simulation of three-dimensional turbulent flow in a centrifugal pump impeller

Computation of Unsteady Flow Fields in a Pump Using Sliding Mesh Method

Numerical Analysis of the Flow Field in the Pump Chamber of a Centrifugal Pump with Back Blades

Study on flows through centrifugal pump impeller by turbulent simulation