Abstract:The separation and recovery of Li+ from high-ratio Mg/Li salt lake brines possess a big significance, especially the demand for Li+ has grown rapidly in recently years. The ionic liquid [C2mim][NTf2] with tributyl phosphate (TBP) and sulfonated kerosene system was hired as an extractant to extract Li+ from salt lake brines with a high-ratio of Mg/Li experimentally by using a homemade membrane emulsification circulation (MEC) extractor. From the single-element extraction, the extraction efficiency of Li+ could be up to 96.0 % within 8 min. In view of the multi-element experiment, the MEC extractor manifested better extraction performance compared with oscillating and stirring extraction. The extraction ability of the extractant for Li+ could reach the ideal level without the addition of any co-extraction agents (Fe3+ and ClO4 −). The new extraction system could have extensive applications since the extraction performance was insensitive to pH and temperature. The optimal extraction conditions for Li+ were V TBP: V[C2mim][NTf2]: V kerosene = 8:1:1, R(O/A) = 1. In addition, the stripping efficiency of Li+ could be improved by increasing the A/O and stripping stage. When the stripping stage reached 3, 94.5 % of Li+ could be extracted successfully by using 2 mol/L HCl. The slope method and FT-IR analysis manifested that the TBP-[C2mim][NTf2]-sulfonated kerosene system extracted Li+ by an anion coordination mechanism in the form of [Li·2TBP]+ org. The DFT calculations were used for revealing the reaction between Li+ and P = O. The results are expected to provide experimental data and a theoretical basis for practical application.

Extraction of bromine from brine by emulsion liquid membrane

The Extration of Bromine with Liquid Membrane

Progress in Extractants for Boron Recovery from Salt-Lake Brine

Research on PTFE Gas Membrane Process for Extraction of Bromine from Brine

Extraction of Lithium from Brine with Neutral Organophosphorous Solvents

Extraction of Lithium from Salt Lake Brine and Mechanism Research

A Reversible Absorption-Based Supported Gas Membrane Process for Enriching Bromine from Brine by Using Thin Ptfe Hollow Fibers

Extraction and separation of Li+ from high-ratio Mg/Li salt lake brines by [C2mim][NTf2] ionic liquid and a homemade extractor

Extraction Separation of Rhamnolipids by N-Hexane Via Forming Reverse Micelles

Extraction of rubidium ion from brine solutions by dicyclohexano-18-crown-6 / ionic liquid system

Extraction of rubidium and cesium from brine solutions using a room temperature ionic liquid system containing 18-crown-6

Study on Solvent Extraction Behavior of Rubidium by t-BAMBP-Sulphonated Kerosene System from Salt Lake Brine

Extraction of Cesium and Rubidium with 4-Tert-butyl-2- (Α-Methylbenzyl) Phenol from Salt Lake Brine

EXTRACTION OF ANILINE FROM AQUEOUS SOLUTIONS USING EMULSION LIQUID MEMBRANES

Recovery of lithium from salt lake brine with high Na/Li ratio using solvent extraction

Extraction of boron from salt lake brine using 2-ethylhexanol

Lithium extraction from low-grade salt lake brine with ultrahigh Mg/Li ratio using TBP – kerosene – FeCl3 system

Solvent extraction of lithium from brines with high magnesium/lithium ratios: investigation on parameter interactions

Recovery of lithium from salt-lake brine by liquid-liquid extraction using TBP-FeCl<sub>3</sub> based mixture solvent

Investigation of electrochemical oxidation technology for selective bromine extraction in comprehensive utilization of concentrated seawater