Abstract:Hole drilling or contour milling for the large and complex workpieces such as automobile panels and aircraft fuselages makes a high combined demand on machining accuracy, stiffness and workspace of machining equipment. Therefore, a 5-DOF (degrees of freedom) parallel kinematic machine (PKM) with redundant constraints is proposed. Based on the kinematics analysis of the parallel mechanism using intermediate variables, the kinematics problems of the PKM are solved through equivalent kinematics model. The structural stiffness matrix method is adopted to model the stiffness of the parallel mechanism of the PKM, where the stiffness of each joint and branch component is obtained by stiffness formula and finite element analysis. And the stiffness model of the parallel mechanism is improved by correction coefficient matrix, each element of which is constructed as a polynomial function of three independent end variables of the parallel mechanism. The terminal stiffness matrices obtained by simulation result are used to determine the coefficients of polynomial function by least square fitting to describe the correction coefficient over the workspace of the parallel mechanism quantitatively. The experiment results prove that the modification method can greatly improve the stiffness model of the parallel mechanism. To enhance the machining accuracy of the PKM, the proposed kinematics model and the improved stiffness model are utilized to optimize the working stiffness of parallel machine by searching the best relative position of parallel machine and workpiece. A plate workpiece taken as example is examined in the case study section, which demonstrates the effectiveness of optimization method.

Stiffness analysis of a Stewart platform-based parallel kinematic machine

Finite Particle Method for Kinematically Indeterminate Bar Assemblies

Non-Inertial Dynamic Analysis of 3-SPS/U Parallel Platform by Screw Theory and Kane’s Method

The Finite Element Analysis and Optimization of Static Stiffness of a New Parallel Kinematic Machine

Model Analysis of Steel Frame Structures Considering Interactions between Racks and the Frame

End Stiffness Modeling for Automatic Horizontal Dual-Machine Cooperative Drilling and Riveting System

Kinematic and Quasi-Static Analysis Model of a Novel Variable Stiffness Pneumatic Artificial Muscle

Stiffness Analysis of Machine Tools Using Finite Element Method

Improved Stiffness Modeling for An Exechon-Like Parallel Kinematic Machine (PKM) and Its Application

Stiffness Modeling Approach for a 3-DOF Parallel Manipulator with Consideration of Nonlinear Joint Stiffness

Stiffness Analysis and Optimization of a Hybrid Machine Tool Based on the Stiffness Matrix

STIFFNESS ANALYSIS AND DESIGN OF 2-DOF PLANAR PARALLEL MANIPULATOR

Stiffness Analysis of Gantry Hybrid Machine Tools

Static stiffness research of a hybrid machine tool based on the element stiffness matrix

Stiffness analysis of overconstrained parallel manipulators

KINEMATICS AND STIFFNESS ANALYSIS OF A NOVEL 4-DOF OVER-CONSTRAINED PARALLEL MECHANISM WITH THREE LEGS, 450-460.

STUDY OF OPTIMAL DESIGN AND LEG INERTIA EFFECT IN LARGE HYDRAULIC STEWART PLATFORM

Stiffness Analysis of Parallel Manipulators with Preloaded Passive Joints

A Method of Stiffness Analysis of Parallel Mechanisms

Stiffness modeling of a 2-DoF over-constrained planar parallel mechanism

Stiffness Design, Analysis and Validation of a Parallel-Mechanism Equivalent Suspension System