Media selection for anammox‐based polishing filters: balancing anammox enrichment and retention with filtration function
Rahil Fofana,Bo Peng,Huu Huynh,Mehran Sajjad,Kimberly Jones,Ahmed Al‐Omari,Charles Bott,Jeseth Delgado Vela,Sudhir Murthy,Bernhard Wett,Christine Debarbadillo,Haydee De Clippeleir,Jeseth Delgado‐Vela
DOI: https://doi.org/10.1002/wer.10724
2022-05-07
Water Environment Research
Abstract:Retrofitting conventional denitrification filters into partial denitrification‐anammox (PdNA) or anammox (AnAOB)‐based filters will reduce the needs for external carbon addition. The success of AnAOB‐based filters depends on anammox growth and retention within such filters. Studies have overlooked the importance of media selection and its impact on AnAOB capacity, head loss progression dynamics, and shear conditions applied onto the AnAOB biofilm. The objective of this study was to evaluate viable media types (10 types) that can enhance AnAOB rates for efficient nitrogen removal in filters. Given the higher backwash requirement and lower AnAOB capacity of the conventionally used sand, expanded clay (3‐5 mm) was recommended for AnAOB‐based filters in this study. Owing to its surface characteristics, expanded clay had higher AnAOB activity (304 vs 104 g NH4+‐N‐N/m2/d) and higher AnAOB retention (43% more) than sand. Increasing the iron content of expanded clay to 37% resulted in an increase in zeta potential, which led to 56% more anammox capacity compared to expanded clay with 7% iron content. This work provides insight into the importance of media types in the growth and retention of AnAOB in filters and this knowledge could be used as basis in the development of PdNA filters.
environmental sciences,engineering, environmental,water resources,limnology