Abstract:An efficient membrane based process for simultaneous degumming and deacidification of vegetable oil was investigated. Appropriate crude oil conditioning allow the formation of submicronic aggregates, composed with soaps molecules resulting from the neutralisation of FFA and PL, which are retained when microfiltrating. Initial flux for the 0.8 μm membranes (∼560 l/h m2) was about twice that of the 0.5 μm and about 10 times that of 0.2 μm membrane. The filtered oils showed good quality in the case of 0.2 and 0.5 μm membranes, but the use of 0.8 μm membranes has allowed some soaps to pass through. Two types of crude oils behaviour were noticed. Oppositely to some oils for which just simple neutralisation led to a satisfactory elimination of the phospholipids, others were very tough to refine. The operating pression seems not to affect the efficiency of the separation, whereas the stability of the vesicle-like aggregates is found to be greatly affected by the increase of the temperature above 25 °C. Beside the quasi-elimination of FFA, PL and water, minerals and pigments contents were also greatly lowered. When using an NaOH 20%, the lovibond yellow score lowered from around 28 to 10 in the case of sunflower oils and from ∼34 to 6–20 in the case of soya and rapeseed oils. The monoglycerides were almost undetectable after membrane processing whatever the type of the conditioning used. After processing, the diglycerides contents, which ranges in the tested crude oils between 0.8% and 1.0%, showed almost no changes for two oils, whereas noticeable increases were obtained for the other oils. Total phytosterols contents were systematically reduced. The reductions vary from 3% to 44% upon the case. Neutralisation with an NaOH 20% lead to higher sterol losses in comparison to NaOH 40%. All the sterol components contents were found to be reduced in almost similar proportions.Industrial relevanceConventional oil recovery and purification processes are continuousely sought to be replaced by gentler processing conditions. Membrane based oil refining operating at low temperatures and without the generation of waste water offer an interesting and promising approach towards “greener” technologies.

Refining Waste Fried Oil through Sodium Silicate and Activated Bleaching Clay

Determination and Removal of Malondialdehyde and Other 2-Thiobarbituric Acid Reactive Substances in Waste Cooking Oil

Reclamation Of Acid Pickling Waste: Preparation Of Nano Alpha-Fe2o3 And Its Catalytic Performance

Optimization of an oil recovery process from oily sludge using a combined technique of froth flotation and centrifugal treatment

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

Utilizing Nano-Adsorbents and Electrostatic Field Treatment for Sustainable Refinement of Crude Canola Oil

Influence of acid and thermal treatment on regeneration of spent bleaching clay and conversion of residual oil to biodiesel

Disposal, regeneration and pyrolysis products characterization of spent bleaching clay from vegetable oil refinery in a fluidized bed pyrolyser

Preparation of Alumina and Silica White from Oil Shale Residue

The Recycling of Acid Wastewater with High Concentrations of Organic Matter: Recovery of H2SO4 and Preparation of Activated Carbon

Novel oily sludge treatment process: Based on biological leaching

Surface functionalization of synthesized sodium alginate from brown algae for maximizing the yield of re-refined used lubricating oil using extraction-flocculation–an environment-friendly approach

Refinery Operation Optimization for Purification of Biodiesel Product by Alkaline-catalyzed Process

Oil recovery from oil sludge through combined ultrasound and thermochemical cleaning treatment

An Efficient Deacidification Process for Safflower Seed Oil with High Nutritional Property through Optimized Ultrasonic-Assisted Technology

Process optimization of esterification for deacidification in waste cooking oil: RSM approach and for biodiesel production assisted with ultrasonic and solvent

Process optimization and mechanism for removal of high-concentration chlorine from municipal solid waste incineration fly ash washing wastewater by Friedel's salt

A novel combined metallurgy-beneficiation method for the facile and low-cost comprehensive resource utilization of low-grade kaolin solid wastes

Membrane-based simultaneous degumming and deacidification of vegetable oils

THE APPLICATIONAL RESEARCH OF PREPARING LUBE BASE OIL BY COMPLEXATION-ADSORPTION TECHNOLOGY

Method for recycling organic resource in waste sulphuric acid and refining waste sulfuric acid