Abstract:For advanced performance lithium-ion batteries (LIBs) various novel electrode materials with high energy density have been extensively investigated. Cobaltosic oxide (Co3O4), commonly used as an anode in LIBs, has attracted much interest because of its high theoretical specific capacity (890 mAh center dot g(-1)), high tap density, and stable chemical properties. However, its practical use has been hindered because of its low electronic conductivity and poor rate capability. To address these problems, we investigated a liquid phase precipitation method followed by thermal treatment and obtained a unique lamellar Co3O4 powder. Its X-ray diffraction (XRD) diffraction peaks match the standard pattern for cubic phaseCo(3)O(4) with good crystallinity. We found that the Co3O4 powder consists of many irregular sheets (1.5-3.0 mu m in diameter, 100-300 nm in thickness) with numerous poles by scanning electronmicroscopy (SEM). Additionally, the surface area was about 30.5m(2) center dot g-1, and this was calculated from BET nitrogen adsorption isotherm measurement data. Remarkably, perfect performance was obtained as evaluated by electrochemical measurements, including a high initial discharge capacity (1444.5 mAh center dot g(-1) at 0.1C) and excellent capacity retention (charge capacity after 50 cycles was still greater than 1100.0 mAh center dot g(-1) at 0.1C). However, its rate capability was still not adequate (75.3% of the first charge capacity after 50 cycles at 1C). To improve the rate capability, commercial carbon nanotubes (CNTs) mixed with the Co3O4 powder was used to enhance the electronic conductivity. The charge capacity retention ratios were 96.3% after 70 cycles at 1C and 97.0% after 50 cycles at 2C. Therefore, enhanced electrochemical performance with impressive rate capability was obtained, as expected.

Synthesis and high rate properties of nanoparticled lithium cobalt oxides as the cathode material for lithium-ion battery

Nanoparticled Li(Ni1/3co1/3mn1/3)O-2 As Cathode Material for High-Rate Lithium-Ion Batteries

Nanostructured hybrid cobalt oxide/copper electrodes of lithium-ion batteries with reversible high-rate capabilities

Ultradispersed Nanoarchitecture of LiV 3 O 8 Nanoparticle/Reduced Graphene Oxide with High-Capacity and Long-Life Lithium-Ion Battery Cathodes

Ultrasmall Co3O4 nanoparticles as a long-lived high-rate lithium-ion battery anode.

Synthesis of Spherical Carbon‐Coated CoP Nanoparticles for High‐Performance Lithium‐Ion Batteries

Well-Dispersed Co/CoO/C Nanospheres with Tunable Morphology as High-Performance Anodes for Lithium Ion Batteries

Application of Nano Al2O3 Particles As Precipitate Nucleus for Preparation of High Rate Nickel-Rich Cathode Materials

Cobalt-based Layered Metal Compound Nanoplatelets for Lithium-Ion Batteries

Nanoporous Composites of CoO x Quantum Dots and ZIF-Derived Carbon as High-Performance Anodes for Lithium-Ion Batteries

Coprecipitation-Gel Synthesis and Degradation Mechanism of Octahedral Li1.2Mn0.54Ni0.13Co0.13O2 as High-Performance Cathode Materials for Lithium-Ion Batteries

A New Lithium Nickel Oxide Cathode Material with a Composite Structure for High-Performance Li-ion Batteries

Electrostatic Spray Deposition of Nanoporous Coo/Co Composite Thin Films As Anode Materials for Lithium-Ion Batteries

Nanoparticles-Assembly Of Limn2o4 Hollow Microspheres With Improved Rate Capability And Cycleability For Lithium Ion Batteries

Synthesis and Electrochemical Properties of LiNi0. 5Co0. 5O2 Cathode Material for Lithium Ion Battery

Unveiling the Particle-Feature Influence of Lithium Nickel Manganese Cobalt Oxide on the High-Rate Performances of Practical Lithium-ion Batteries

Synthesis and Evaluation of Microspherical Li1.2Mn0.54Co0.13Ni0.13O2 Through Carbon Dioxides-assisted Co-precipitation Method for Lithium-ion Battery

Controllable Synthesis of Nanostructured ZnCo2O4 As High-Performance Anode Materials for Lithium-Ion Batteries

Synthesis and Modification of a Lamellar Co3O4 Anode for Lithium-Ion Batteries

Microsphere LiMn0.6Fe0.4PO4/C Cathode with Unique Rod-Like Secondary Architecture for High Energy Lithium Ion Batteries

An Efficient Synthetic Method To Prepare High-Performance Ni-Rich Lini0.8co0.1mn0.1o2 For Lithium-Ion Batteries