Abstract:Waterborne two-component polyurethanes (WB 2K-PUs) represent an environmentally friendly alternative to solvent-borne coatings, with reduced use of volatile organic compounds (VOCs). These coatings still cannot achieve the outstanding performance of solvent-borne 2K-PU formulations. In many WB 2K-PU formulations, a key step involves coalescence between polyol latex particles and nanoparticles formed from a water-dispersible polyisocyanate (PIC). Interactions between the PIC and the polyol take place both in the aqueous medium and after application of the coating to a substrate. A deeper understanding of this mechanism should guide improvements in formulations to improve WB 2K-PU coating performance. Our long-term goal is to investigate the film formation mechanism of a series of different polyol nanoparticles with aqueous dispersions of PICs based on a hexamethylene diisocyanate (HDI) trimer; as a first step in this direction, we examined the nature of the nanoparticles formed by dispersing an oligo-ethylene glycol (OEG)-modified HDI trimer in water. Typical techniques for nanoparticle size characterization (dynamic light scattering (DLS) and capillary hydrodynamic fractionation chromatography, (CHDF)) led to misleading information. These techniques indicated the presence of uniform nanoparticles with a diameter of ca. 100 nm that persisted for days. In contrast, DOSY H-1 NMR gave a diameter of 20 nm. Nanoparticle tracking analysis (NTA) confirmed the presence of the larger particles, but showed that they represented only 18 wt % of the dispersion. Over time, the isocyanate groups in the particles reacted with water, and the nanoparticles evolved from liquid droplets to mechanically robust polyurea particles. At this stage, imaging by electron microscopy showed a predominance of 20 nm particles. The kinetics of this chemical transformation was monitored by Fourier transform infrared (FT-IR) spectroscopy. The reaction of the isocyanate groups followed pseudo-first-order kinetics with a half-life of 11 to 14 h.

Quantitative IR characterization of urea groups in waterborne polyurethanes

Distribution of Hydrophilic Monomer Units and Its Effect on the Property of the Water Dispersion of Polyurethaneurea Anionomer

The Structure Analysis and Characterization of N-100 by Nmr

In Situ FT‐IR‐ATR Studies on the Structure Development of Polyurethane‐urea Systems

[IR studies on deuterated polyester polyurethaneurea elastomers]

FTIR spectroscopic studies of hydration effect on the molecular structure of polyether urethane

NMR Analysis to Identify Biuret Groups in Common Polyureas

[IR studies on hydrogen bonding in hard segment domains of segmented polyester polyurethaneurea]

Characterization of an Aqueous Dispersion of a Hydrophilic Polyisocyanate for Waterborne Two-Pack Polyurethane Coatings

Preparation and Characterization of Waterborne Polyurethaneurea Composed of C9-diol-based Polyester Polyol

Synthesis of a Novel UV Crosslinking Waterborne Siloxane–polyurethane

Investigation of the Curing Process of Spray Polyurea Elastomer by Ftir, Dsc, and Dma

Author Response for "monitoring the Reaction Kinetics of Waterborne 2‐pack Polyurethane Coatings in the Dispersion and During Film Formation"

Influence of fluorine‐containing side chain on the properties of waterborne polyurethane‐urea

UV-curing of Hyperbranched Polyurethane Acrylate-Polyurethane Diacrylate/sio 2 Dispersion and TGA/FTIR Study of Cured Films

Phase Reversal During Water Dispersion of Polyurethane Anionomer

The Kinetics of the Polyurethane Moisture Curing Reaction: a Combined Experimental and DFT Mechanistic Study

Preparation and Characterization of Aqueous Oil-Modified Polyurethane

In situ miniemulsion polymerization of water-borne polyurethanes(Ⅰ)Competition of polyaddition with hydrolysis of isocyanate

Environment-Induced Surface Structural Changes of a Polymer: an in Situ IR + Visible Sum-Frequency Spectroscopic Study

Effects of Isosorbide on the Microphase Separation and Properties of Waterborne Polyurethane Coatings