Abstract:Five-axis ball-end milling is widely used in energy, ship, aerospace, and other fields. As one of the difficulties in milling research, milling force is often critical to the processing efficiency and quality of part. For predicting the milling force of the five-axis ball-end milling better, this paper presents a cutting force coefficients identification model which is related to the instantaneous chip layer thickness and axial position angle considering the cutter run-out. For five-axis ball-end milling of the oblique plane, the relationship of feed direction, cutter axis vector, and machined surface is parameterized. The boundary curves of cutter workpiece engagement (CWE) are determined by intersecting spatial surfaces. The boundary curves are discretized, and an algorithm of in-cut cutting edge (ICCE) is proposed by defining the distance between discrete points and the cutting edge. Combining the instantaneous chip thickness considering arbitrary feed direction and cutter run-out, the five-axis milling force model of ball-end mill is established. Based on the undetermined coefficient method and the instantaneous average milling force of teeth, the cutting force coefficients identification model corresponding to the instantaneous chip layer thickness and the axial position angle is established. Furthermore, cutter run-out parameters are obtained combined with instantaneous measured milling force of single tooth. The experimental and simulation examples demonstrate that the CWE determined by the spatial surfaces is consistent with the experimental results. The ICCE is in good agreement with the simulation results based on the solid modeling method. A large number of milling experiments under different processing parameters show that the cutting force coefficients and cutter run-out parameters identification model can be effectively applied to five-axis ball-end milling.

Identification of Cutter Axis Tilt in End Milling

Enhanced modeling of instantaneous uncut chip thickness and cutter workpiece engagement region in 5 axis ball end milling: Case of the tilt orientation

Study of the Classification of Cutting Forces and the Build of Accurate Milling Force Model in End Milling

An Identification Model of Cutting Force Coefficients for Five-Axis Ball-End Milling

Identification of Cutting Shear Stress, Shear and Friction Angles Using Flat End Milling Tests

Angle Domain Analytical Model for End Milling Forces

Prediction of Cutting Force in Five-Axis Flat-End Milling

An Instantaneous Cutting Force Model for Disc Mill Cutter Based on the Machining Blisk-Tunnel of Aero-Engine

A prediction method of cutting force coefficients with helix angle of flat-end cutter and its application in a virtual three-axis milling simulation system

Dynamic Force Modelling for a Ball-End Milling Cutter Based on the Merchant Oblique Cutting Theory

A Unified Analytical Cutting Force Model for Variable Helix End Mills

Modeling and analysis of cutting forces in orthogonal turn-milling shaft parts with helical end mills

A Generalised Model of Milling Forces

RESEARCH ON CUTTING FORCE MODELLING AND INFLUENCE FACTORS FOR END MILLS WITH VARIABLE-HELIX ANGLE

A unified instantaneous cutting force model for flat end mills with variable geometries

On-line Cutting Force Coefficients Identification for Bull-End Milling Process with Vibration

An Approach to Modeling Cutting Forces in Five-Axis Ball-End Milling of Curved Geometries Based on Tool Motion Analysis

Improved Dynamic Cutting Force Model in Peripheral Milling. Part I: Theoretical Model and Simulation

A Unified Cutting Force Model for Flat End Mills Based on Cutter Geometry and Material Properties

Parametric Chip Thickness Model Based Cutting Forces Estimation Considering Cutter Runout of Five-Axis General End Milling

Decoupled Chip Thickness Calculation Model for Cutting Force Prediction in Five-Axis Ball-End Milling