Performance analysis of a two-stage evaporation heat pump drying system for graded cooling/dehumidification
Shuangping Duan,Lin Wang,Dongmei Nie
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122965
IF: 6.4
2024-06-01
Applied Thermal Engineering
Abstract:Single-stage evaporation heat pumps are widely used in drying fields, but they suffer from relatively low efficiency. To enhance the performance of conventional heat pump drying systems with single-stage evaporating, a two-stage evaporation heat pump drying (TSE-HPD) system is proposed in this paper for graded cooling/dehumidification. In this innovative system, the quasi dual-stage compression, matching a double temperature level evaporation process, achieves graded cooling and dehumidification of air. Its performance is investigated using energy and exergy analysis methods and compared with that of a single-stage compression heat pump drying (SSC-PHD) system. The results indicate that the TSE-HPD system exhibits 15.5 %–19.3 % improvement in the coefficient of performance (COP) and 16.3 %–18.9 % enhancement in the specific moisture extraction rate (SMER) compared to those of the SSC-PHD system when the condensing temperature varies between 50 °C and 70 °C. The parametric analysis reveals that the highest COP, SMER, and exergy efficiency (η ex) occur when the optimum first-stage evaporating temperatures are 16 °C, 25 °C, and 34 °C, respectively, under three standard operating conditions. At this time, the first-stage evaporator handles 36 %–40 % of the cooling/dehumidification tasks, the refrigerant mass flow ratio at the intermediate-pressure suction port of the compressor ranges from 47 %–58 %, and the optimum first-stage and second-stage compression ratios are 1.49–1.52 and 2.45–2.61, respectively. The research results provide guidance and reference for the determination of matching design parameters and efficient operation control parameters of drying systems.
energy & fuels,engineering, mechanical,thermodynamics,mechanics