Abstract:The reliable bond of steel fibers to concrete matrix is fundamental to ensure they work together under internal and external actions throughout their service life. Due to the lack of research on the long-term bond property, this paper conducted an experimental study on the bond of hook-end steel fiber in the manufactured sand mortars with different water to binder ratios cured for different ages from 7 days to 360 days. The characteristic pull-out load-slip curves are measured, and bond performance indexes at different curing ages are analyzed by using the multi-index synthetical evaluation method. The results show that the bond strengths, the fiber strength use efficiency, the debonding work and the pull-out work increased with the increase in curing age up to to 90 days, which became stable with little variation with the follow-up curing age. The variations are closely associated with the development of mortar strength. Steel fibers embedded in high-strength mortar presented a higher debonding ductility and a lower slipping ductility. In addition, the prediction formulas of long-term debonding strength, bond strength and residual bond strength are proposed.

Discuss of Bond Mechanism of AI-phosphate Hot Cured Sand

Discuss on Humidity Resistance Mechanism of Aluminum-Phosphate Heat Cured Sand

Mechanism of Strength Loss of No-Bake Phosphate Bonded Sand Mold/core

Effect of Magnesium-containing Modifier on the Properties of Boron Aluminum Phosphate Inorganic Binder and Its Heat-cured Molding Sand

Research on New Al-Mg-B Compound Phosphate Inorganic Binder for Heat Cured Sand

Effect of Boron-contaning Modifier on the Properties of Heat-cured Aluminum Phosphate Inorganic Binder-bonded Sand

Study of Environmentally Friendly Phosphate-Bonded No-Bake Sand

Effect of Modifiers on Properties of No-bake Aluminium Phosphate Sand

Research on New Environmental Friendly Heat Cured Sand of Al-Mg-B Compound Phosphate Inorganic Binder

Study on the Storage Stability of High Neutralization Degree Phosphate-Bonded No-Bake Sand

Suspension Curing Agent for Phosphate Binder Bonded No-baked Sand

Bond Performance of Hook-End Steel Fiber to the Mortars Cured for 360 Days

Study on Properties of Phosphate Binder No-Bake Sand

Device Design of Hot-Air Curing and Study on the Properties of Hot-Air Cured Phosphate Sand

Study on Properties of Microwave Hardened Inorganic Phosphate Binder Foundry Sand

A Study on the Modified Aluminosilicate Sand Stabilization Material

Molecular Dynamics Study on the Adsorption and Modification Mechanism of Polymeric Sand-Fixing Agent

A New Phosphate Binder for Making Sand Mold or Core for Aluminum Alloy Castings

A New Compound Phosphate Heat-Cured Foundry Binder

Superiority of a New Modified Phosphate Casting Binder

Effect of Factors on Strength and Stability in No Bake Sand Phosphate Inorganic Binder