Abstract:This paper has explored an ultra-low-power design of two 60-GHz direct-conversion receivers in a 65-nm CMOS process for single-channel and multi-channel applications under the IEEE 802.15.3c standard, respectively. One subthreshold biasing 0.4-V transconductance mixer is designed with a compact quadrature hybrid coupler (160 μm × 210 μm with measured 3-dB intrinsic loss) in receivers to achieve low power (8 mW for single channel and 12.4 mW for multi-channel) and high gain (55 dB for single channel and 62-dB for multi-channel). One three-stage low-noise amplifier employs high- Q passive matchings. A double-layer-stacked inductor is utilized for matching in the single-channel receiver and a high-impedance transmission line is utilized for matching in the multi-channel receiver, respectively. In addition, one new modified Cherry-Hooper amplifier is applied for the variable-gain amplifier design to achieve high gain-bandwidth product and high power efficiency. The single-channel receiver is implemented with 0.34- mm2 chip area. It is measured with a power consumption of 8 mW, a minimum single-sideband noise figure (NF) of 4.9 dB, a 3-dB bandwidth of 3.5 GHz, and a maximum conversion gain of 55 dB. The multi-channel receiver is implemented with 0.56- mm2 chip area. It is measured with a power consumption of 12.4 mW, a 3-dB bandwidth of 8 GHz (59.5 ~ 67.5 GHz), and a maximum conversion gain of 62 dB. The measurement results show that the two demonstrated 60-GHz direct-conversion receivers can achieve high gain and low NF with ultra-low power in 65-nm CMOS.

A 4.2 mm 72 mW Multistandard Direct-Conversion DTV Tuner in 65 nm CMOS

A 1.8-V CMOS Direct-Conversion Tuner for Mobile DTV Applications

A Sub-1-GHz Band High-Dynamic-Range Receiver with Integrated Self-Adaptive Multipart AGC Loops

A 65 Mw Fully Integrated UHF-band CMMB Tuner in 65 Nm CMOS Process

A Sub-GHz Low-Power Receiver Employing Resistive-Feedback-Tuned LNA with 2.1-Db NF and 106-Db Gain Tuning Range

A High Performance 2-Ghz Direct-Conversion Front End with Single-Ended RF Input in 0.13 Um CMOS

A ${\hbox{70}}{\hbox{–}} {\Hbox{78-}}{\Hbox{ghz}}$ Integrated CMOS Frequency Synthesizer for $W$ -Band Satellite Communications

A ${\hbox{70}}{\hbox{–}} {\Hbox{78-}}{\Hbox{ghz}}$ Integrated CMOS Frequency Synthesizer for $W$-Band Satellite Communications

An RF Front-End for a Fully Integrated CMOS DTV Tuner

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

A Wideband CMOS Inductorless Low Noise Amplifier Employing Noise Cancellation for Digital TV Tuner Applications

A 50-to-930mhz Quadrature-Output Fractional-N Frequency Synthesizer with 770-to-1860mhz Single-Inductor LC-VCO and Without Noise Folding Effect for Multistandard DTV Tuners

An 18-Mw 1.175–2-Ghz Frequency Synthesizer with Constant Bandwidth for DVB-T Tuners

An 8mw Ultra Low Power 60ghz Direct-Conversion Receiver with 55db Gain and 4.9db Noise Figure in 65nm CMOS

Design of Wideband Gain-variable LNA Based on Mobile Digital TV Applications

A Dual Loop Dual VCO CMOS PLL Using a Novel Coarse Tuning Technique for DTV

A LC VCO for Mobile Digital TV Tuner

A 0.18 Μm CMOS Inductorless Complementary-Noise-canceling-lna for TV Tuner Applications

A High Linearity Multi-Band and Gain Adjustable Channel-Select Filter for TV-tuner Application

A Highly-Integrated Ka-Band Direct Up-Conversion Transmitter for Satellite Communication in 65nm CMOS

Design of Ultra-Low-Power 60-Ghz Direct-Conversion Receivers in 65-Nm CMOS