Electropolymerization of Toluidine Blue into Multilayer Carbon Nanotube and PDDA on Screen-printed Electrode for Sensitive Detection of NADH

FENG Cai-hong,GUO Yan-yan,GAO Qiang

DOI: https://doi.org/10.3969/j.issn.1004-4957.2010.01.014

2010-01-01

Abstract:An electrochemical sensing platform was developed for the amperometric detection of β-nicotinamide adenine dinucleotide(NADH) via electrooxidative polymerization of toluidine blue into a multiwalled carbon nanotubes(MWCNTs)/poly(diallyldimethylammonium chloride)(PDDA) multilayer constructed by electrostatic layer-by-layer assembled onto a screen-printed electrode.Electrochemical techniques and scanning electron microscopy(SEM) were used to demonstrate that the porous composite was formed on the surface of the electrode and carbon nanotubes served as nanosized backbone for loading the polymeric toluidine blue.Compared with the pure poly(toluidine blue) modified electrode,the sensitivity of the hybrid film modified electrode was improved for the determination of NADH.In phosphate buffer solution(pH=7.4),the electrocatalytic current for NADH oxidation was enhanced with the increase of the number of layers.The assembled amount on the electrode surface of the CNTs increased significantly,thus leading to the increase of effective electrode area and the increase of the loading amount of poly(toluidine blue) on the electrode surface.Compared with the bare electrode,the oxidation potential was reduced by 560 mV,and the sensitivity increased significantly.Under the optimal condition,a linear range of 8.7×10-8-1.3×10-4 mol/L NADH and a detection limit of 2.8×10-8 mol/L for NADH were obtained.Thus the(MWCNTs/PDDA)n-poly(toluidine blue) hybrid film on screen-printed electrode can be used for the detection of NADH.