Study on Leaching High Zn-Pb Dust from Rotary Hearth Furnace by Sulfuric Acid Solution

ZHU Rong-sun,WU Zheng,YI Ting-feng,XIA Zheng-yu
DOI: https://doi.org/10.3969/j.issn.0253-6099.2012.03.028
2012-01-01
Abstract:The technological conditions and parameters of leaching high Zn-Pb dust to extract Zn from rotary hearth furnace by sulfuric acid solution were studied.The optimum leaching conditions were obtained as follows: the stirring rate was 400 r/min,sulfuric acid concentration was 1.0 mol/L,the leaching temperature was 25 ℃,the solid-liquid ratio was 1∶8 and leaching time was 0.5 h.Under these conditions,the leching rate of zinc can reach above 96%.Purification treatment was conducted for the leaching liquid,including using geothite and oxidation-hydrolysis process to remove iron,using ammonium persulphate to remove iron and manganese,using zinc powder to replace and remove impurities,thus high purity zinc sulfate solution was obtained,which can be used to prepare zinc or basic zinc carbonate and zinc oxide by direct electrolysis.
What problem does this paper attempt to address?