Abstract:Aerogels can be used in a broad range of applications such as bioscaffolds, energy storage devices, sensors, pollutant treatment, and thermal insulating materials due to their excellent properties including large surface area, low density, low thermal conductivity, and high porosity. Here we report a facile and effective top-down approach to fabricate an anisotropic wood aerogel directly from natural wood by a simple chemical treatment. The wood aerogel has a layered structure with anisotropic structural properties due to the destruction of cell walls by the removal of lignin and hemicellulose. The layered structure results in the anisotropic wood aerogel having good mechanical compressibility and fragility resistance, demonstrated by a high reversible compression of 60% and stress retention of similar to 90% after 10 000 compression cycles. Moreover, the anisotropic structure of the wood aerogel with curved layers stacking layer-by-layer and aligned cellulose nanofibers inside each individual layer enables the wood aerogel to have an anisotropic thermal conductivity with an anisotropy factor of similar to 4.3. An extremely low thermal conductivity of 0.028 W/m.K perpendicular to the cellulose alignment direction and a thermal conductivity of 0.12 W/m.K along the cellulose alignment direction can be achieved. The thermal conductivity is not only much lower than that of the natural wood material (by similar to 3.6 times) but also lower than most of the commercial thermal insulation materials. The top-down approach is low-cost, scalable, simple, yet effective, representing a promising direction for the fabrication of high-quality aerogel materials.

The Basic Properties of Lightweight Woods and the Study of Aerogel-Type Wood

Microstructure and Chemical Properties of Aerogel-type Wood

The Preparation and Research of the Aerogel-Type Wood Composite Material

Lightweight, Anisotropic, Compressible, and Thermally-Insulating Wood Aerogels with Aligned Cellulose Fibers

Theoretical analysis of Aerogel-type Wood Based on Natural Biological Structure

Preparation and Properties of Organic Aerogel and Its Application to Wood Science

Formation of Aerogel-type Wood

Highly Compressible, Anisotropic Aerogel with Aligned Cellulose Nanofibers

Microstructure of Wood Cell Wall and Preparation Principle of Aerogel-type Wood

Directional-Freezing-Assisted In Situ Sol–Gel Strategy to Synthesize High-Strength, Fire-Resistant, and Hydrophobic Wood-Based Composite Aerogels for Thermal Insulation

"Rigid-Flexible" Anisotropic Biomass-Derived Aerogels with Superior Mechanical Properties for Oil Recovery and Thermal Insulation

Construction of Nanofibrillar Networked Wood Aerogels Derived from Typical Softwood and Hardwood: A Comparative Study on the in Situ Formation Mechanism of Nanofibrillar Networks

Physical Properties of Aerogel-type Wood

Top-Down Approach Making Anisotropic Cellulose Aerogels As Universal Substrates for Multifunctionalization

Wood‐Derived Ultrathin Carbon Nanofiber Aerogels

Ultralight Biomass Aerogels with Multifunctionality and Superelasticity Under Extreme Conditions

Sol-Gel Method Fabricate SiO2 Aerogel Used in Function of Wood Modification

Nanostructurally Controllable Strong Wood Aerogel toward Efficient Thermal Insulation

Low-density carbon aerogels fabrication and its thermal and mechanical properties

Frontispiece: An All‐Natural Wood‐Inspired Aerogel

Wood‐Derived Lightweight and Elastic Carbon Aerogel for Pressure Sensing and Energy Storage