Abstract:Simple and sensitive electrochemical sensors were fabricated from cerium oxide (CeO 2 ) and copper-benzene tricarboxylic acid–modified cerium oxide (CeO 2 -Cu-BTC) materials for differential pulse voltammetric analysis of toxic cadmium (Cd) ions in aqueous solutions. The materials were prepared by hydrothermal method and structurally characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy with energy-dispersive X-ray (SEM-EDX), thermogravimetric analysis (TGA), and X-ray diffraction analysis (XRD). The CeO 2 -modified carbon paste electrode (CeCPE) and the CeO 2 -Cu-BTC-modified carbon paste electrode (CeBCPE) were electrochemically characterized by their cyclic voltammetry and electrochemical impedance study in standard K 3 [Fe(CN) 6 ] single-electron redox process. Their electrochemical surface areas, electrode surface coverages, and charge transfer resistances were calculated to be 1.46 cm 2 , 2.338 × 10 −5 mol∙cm −2 , and 2790 Ω and 5.48 cm 2 , 2.476 × 10 −5 mol∙cm −2 , and 1254.65 Ω for CeCPE and CeBCPE, respectively. These fabricated electrodes were used as electrochemical sensors for cadmium ion estimation by optimizing the experimental parameters through differential pulse voltammetry The optimized conditions included 10% modifier for CeCPE and 5% modifier for CeBCPE in 0.12 M HCl solution of pH 5 as supporting electrolyte at − 1.2 V deposition for 30 s in 0.01 to 10 mg L −1 linear cadmium solution range. Under these conditions, the limit of quantification (LOQ) of 0.368 mg L −1 and 0.005 mg L −1 was calculated for CeCPE and CeBCPE electrodes, respectively. The limit of detection (LOD) was calculated to be 0.121 mg L −1 and 0.002 mg L −1 for CeCPE and CeBCPE, respectively. All the experimental results indicated that electrodes fabricated from CeO 2 -Cu-BTC show better performance as compared to CeO 2 -based electrodes. Both these types of electrochemical sensors presented good repeatability and performance in the presence of interfering ions as well. From these findings, it can also be inferred that these electrochemical sensors can provide a simple and very sensitive method for approximation of toxic cadmium ions in aqueous solutions.

Detection of Cd(II) Using Antibody-Modified Microcantilever Sensors

Ultrasensitive Detection of Cu2+ Using a Microcantilever Sensor Modified with L-Cysteine Self-Assembled Monolayer.

Detection of Hg2+ Using Microcantilever Sensors

Detection of Pb2+ in Aqueous Solution by Using a DNA-modified Microcantilever.

Detection of Pb 2+ Using a Hydrogel Swelling Microcantilever Sensor

Highly Sensitive and Selective Detection of Beryllium Ions Using a Microcantilever Modified with Benzo-9-crown-3 Doped Hydrogel.

Ultrasensitive Detection of Cro42- Using A Microcantilever Sensor

Detection of Copper Ions Using Microcantilever Immunosensors and Enzyme-Linked Immunosorbent Assay

A Performance-Enhanced Bimetallic Chip for the Detection of Cadmium Ions with Surface Plasmon Resonance

Colorimetric detection of Cd2+ using gold nanoparticles cofunctionalized with 6-mercaptonicotinic acid and L-cysteine.

Preparation of Hapten-Specific Monoclonal Antibody for Cadmium and Its Elisa Application to Aqueous Samples

Preparation of Anti-Cadmium-EDTA Complex Polyclonal Antibody and Its Application for Determination of Cadmium in Aqueous Solution

In-situ Detection of Cadmium with Aptamer Functionalized Gold Nanoparticles Based on Smartphone-Based Colorimetric System

Ca-MOF-Polymer Modified Thin-Film Electrode for Detection of Toxic Cadmium (Cd2+) in Biofluid and Environmental Fluid

Highly sensitive colorimetric detection of Cd(II) based on silica sol modified with dithizone and cationic surfactant

Electrochemical Aptasensor for Ultrasensitive Cadmium Detection Through Hybridization Chain-Amplified Reaction

Recent Aptamer-Based Biosensors for Cd2+ Detection

Trace detection of cadmium (II) ions based on an air-hole-assisted multicore microstructured optical fiber

Sensing Cd(II) Using a Disposable Optical Sensor Based on a Schiff Base Immobilisation on a Polymer-Inclusion Membrane. Applications in Water and Art Paint Samples

Development of a robust method for Cd(II) ions analysis using CeO2- and CeO2-Cu-BTC-based electrochemical sensors

Aptamer-Based Electric-Double -Layer (EDL) Extended-Gated FET Biosensor for Detection of Cadmium Ion