Abstract:The paper presented an experimental study on the effect of the resin reinforced core configuration and core thickness on in-plane compressive responses and failure behaviors of composite sandwich specimens. Two resin reinforced core machining configurations were designed with three core thickness along. In-plane compressive load, displacement, strains on both sides, and failure morphology were closely monitored during the loading process. Meanwhile, the theoretical method also was supplementary to forecast the failures of sandwich structures. It was found that the enhancement of grooved, perforated holes and contour cut (GPC) core was better than double-side grooved and perforated hole (DGP) core to improve the in-plane compressive capacity of sandwich specimens for all thick cores. The core fracture or skin/core debonding failure of sandwich specimens resulted in an instant drop of in-plane compressive load, and the global buckling led to a slower reduction. The failure mode changed from global buckling to skin/core debonding at both sides as the core thickness increased for the Plain core sandwich specimen; switched from global buckling to a combined failure of core fracture and skin/core debonding at both sides, and then to skin/core debonding at both sides for the DGP core sandwich specimen; the skin/core debonding at the shallow side occurred for all GPC core specimens. The slight buckling trace of strains before the peak load probably triggered the skin/core debonding of sandwich specimens. The theoretical method could well forecast failure loads and corresponding failure modes of sandwich specimens with the 15 mm thick core, and reasonably predict failure loads for sandwich specimens with 30 mm and 45 mm thick cores.

EFFECT ANALYSIS OF RESINIC COLUMNS IN COMPOSITE MATERIAL SANDWICH BEAMS

Effects of Resinic Columns on Composited Sandwich Plates

EFFECT ANALYSIS OF NOTCHES IN THE CORE LAYER OF COMPO SITE MATERIAL SANDWICH PLATES

Effects of Reinforcement on Buckling of Composite Cylindrical Shells

Finite Dement Analysis for Reinforcement Effects on Dynamic Behavior of Composite Cylindrical Shells

Failure Analysis of Sandwich Beams under Three-Point Bending Based on Theoretical and Numerical Models

Effect of Resinic Columns on Buckling and Vibration of a Composite Sandwich Plate

Plastic Analysis of Multilayer Sandwich Beams with Metal Foam Cores

Large Deflections of Multilayer Sandwich Beams with Metal Foam Cores under Transverse Loading

Indentation of sandwich beams with metal foam core

Plastic Behavior of the Foam-Filled Sandwich Beam with Circular Tube Core under Transverse Loading

Experimental and Numerical Investigation on the Crushing Behavior of Sandwich Composite under Edgewise Compression Loading

EXPERIMENTAL AND THEORETICAL STUDY OF COMPOSITE SANDWICH COLUMN UNDER AXIAL COMPRESSION

Effect of Shear Span-to-depth Ratio on the Mechanical Behavior of Composite Sandwich Beams with GFRP Ribs and Balsa Wood Core Materials

Large deflection of multilayer sandwich beams with foam-filled trapezoidal corrugated and foam cores

In-plane compressive responses and failure behaviors of composite sandwich plates with resin reinforced foam core

Low-velocity Impact Response of Sandwich Beams with a Metal Foam Core: Experimental and Theoretical Investigations

Linear Static Analysis of Composite Hat Stiffener Based on ANSYS

Experimental Investigation of 3d Sandwich Structure with Core Reinforced by Composite Columns

Effect of Core Densities on Quasi-Static and Low-Velocity Impact Behaviors of AFRP-aluminum Foam Hybrid Sandwich Beams