Dynamic buckling of conical shell subjected to impulsive cosine load

PAN Xi-ying,WANG De-yu

DOI: https://doi.org/10.3969/j.issn.1007-7294.2006.02.008

2006-01-01

Abstract:A study was made to determine the dynamic stability of the truncated thin circular conical shell with impulsive cosine load.Methods of solution include the Fourier series and Galerkin procedure.The nonlinear differential equations are solved by a program of Runge-Kutta integration.

What problem does this paper attempt to address?

Analysis of Internal Force and Stability of Hyperbolic-Inverted Conical Reticulated Shell Structure

DU Wen-feng,YANG Guo-zhong,GAO Bo-qing,DONG Shi-lin

DOI: https://doi.org/10.3969/j.issn.1003-4978.2008.03.024

2008-01-01

Abstract:A study of the complex steel reticulated shell composed of a hyperbolic shell and an inverted conical shell is carried out.The principle of structural design and results of mechanics analysis are expounded.Moreover,the analysis of nonlinear stability is completed.Results show that the influence of concrete building and the circular bars to structural stability performance is notable.And the coupling connection in two directions should be used between the front roof and main truss.
A Semi-Analytical Method for the Dynamic Analysis of Cylindrical Shells with Arbitrary Boundaries

Xu Liang,Xing Zha,Xue Jiang,Zeng Cao,Yuhong Wang,Jianxing Leng

DOI: https://doi.org/10.1016/j.oceaneng.2019.02.074

IF: 5

2019-01-01

Ocean Engineering

Abstract:The dynamic behavior of cylindrical shells with arbitrary boundaries is studied in this paper. Love's shell theory and Hamilton's principle are employed to derive the motion equations for cylindrical shells. A semi-analytical methodology, which incorporates Durbin's inverse Laplace transform, differential quadrature method and Fourier series expansion technique, is proposed to investigate this phenomenon. The use of the differential quadrature method provides a solution in terms of the axial direction whereas the use of Durbin's numerical inversion method generates a solution in the time domain. Comparison of calculated frequency parameters to that derived from the literature illustrates the effectiveness of the method. Specifically, convergence tests indicate that the present approach has a rapid convergence, the time-history response and the Navier's solution are in great agreement. Comparisons between time-history responses derived by two shell theories show that the results fit well with each other when the thickness-radius ratios are small enough. An analysis of the influences of boundaries on the time-history response of cylindrical shells indicates that the peak displacement is closely related to the degrees of freedom of boundaries. The influences of the length-radius ratios and the thickness-radius ratios on the peak displacement are further investigated.
Buckling of a conical thin shell with variable thickness under a dynamic loading

A.H. Sofiyev,O. Aksogan

DOI: https://doi.org/10.1016/s0022-460x(03)00638-2

IF: 4.7

2004-03-01

Journal of Sound and Vibration

Abstract:This study considers the buckling of an elastic truncated conical shell having a meridional thickness expressed by an arbitrary function, subject to a uniform external pressure, which is a power function of time. At first, the fundamental relations and Donnell type dynamic buckling equation of an elastic conical shell with variable thickness have been obtained. Then, employing Galerkin's method, those equations have been reduced to a time-dependent differential equation with variable coefficients. Finally, applying the Ritz type variational method, the critical static and dynamic loads, the corresponding wave numbers, dynamic factor and critical stress impulse have been found analytically. Using the results, thus obtained, the effects of the thickness variations with a power or an exponential function, the variation of the semi-vertex angle and the variation of the power of time in the external pressure expression are studied through pertinent computations. It is observed that these factors have appreciable effects on the critical parameters of the problem in the heading.

engineering, mechanical,mechanics,acoustics
Nonlinear Dynamic Analysis of Shells Using Finite Particle Method

Chao YANG,Yao-zhi LUO,Yan-feng ZHENG

DOI: https://doi.org/10.3785/j.issn.1008-973x.2019.06.001

2019-01-01

Abstract:A discrete particle model of thin shells with large displacement and large rotation analysis capability was constructed based on the principle of finite particle method and K-L classical thin shell theory, and the fundamental governing equations and formulas were derived. For the particle displacement and the deformation and internal force of the shell element, the two parts corresponding to the in-plane tension and the out-of-plane bending and twisting were split and superimposed, respectively. The pure deformation related with the membrane rigidity and bending rigidity was sequentially separated by using a physical modeling procedure involving fictitious motions. Then in the local deformation coordinate system, the internal forces and moments were solved, and the explicit time integral formula with variable step sizes for calculation of the out-of-plane rotation was established. The determinations of several key parameters were also given, including particle mass, time step and damping. Moreover, an stress correction algorithm for solving material nonlinearity was introduced to simulate the dynamic nonlinear behavior of a thin shell with large elastic-plastic strain. The efficiency and validity of the presented method and the self-developed program are verified by several benchmark examples of nonlinear shell dynamics.
Analytical Research on Dynamic Buckling of Thin Cylindrical Shells with Thickness Variation under Axial Pressure

Haigui Fan,Zhiping Chen,Jian Cheng,Song Huang,Wenzhuo Feng,Lige Liu

DOI: https://doi.org/10.1016/j.tws.2016.01.009

IF: 5.881

2016-01-01

Thin-Walled Structures

Abstract:This paper focuses on the dynamic buckling of thin cylindrical shells with arbitrary axisymmetric thickness variation under time dependent axial pressure. Based on the derivation of stability and compatibility equations of variable thickness cylindrical shells under dynamic external pressure by Aksogan and Sofiyev, the corresponding stability and compatibility equations of thin cylindrical shells with arbitrary axisymmetric thickness variation under dynamic axial pressure are obtained and expressed in nondimensional form. Combining the small parameter perturbation method, Fourier series expansion and the Sachenkov–Baktieva method, analytical formulas of the critical buckling load of thin cylindrical shells with arbitrary axisymmetric thickness variation under axial pressure that varies as a power function of time are obtained. Two cases of thickness variation are introduced to research the critical dynamic buckling load with the present formulas. Effects of thickness variation parameters and loading speed of dynamic axial pressure on the critical buckling load are discussed. The method is also applied to determine the critical dynamic buckling load of thin cylindrical shells with a classical cosine form thickness variation. Results revel that the thickness variation and pressure parameters play a major role in dictating the buckling capacity of thin cylindrical shells under dynamic axial pressure.
Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure

Hai-Gui Fan,Zhi-Ping Chen,Wen-Zhuo Feng,Fan Zhou,Guo-Wei Cao

DOI: https://doi.org/10.1142/s0219455414500539

2015-01-01

Abstract:This paper presents an analytical study on the critical dynamic buckling load of cylindrical shells with arbitrary axisymmetric thickness variation under uniform external pressure which is a function of time. Based on the Donnell simplified principle, the equilibrium and compatibility equations of cylindrical shells with arbitrary axisymmetric wall thickness under dynamic external pressure were derived. By using the method of separation of variables, the equations were transformed into ordinary differential equations in nondimensional form. Combining Fourier series expansion and the regular perturbation method, as well as the Sachenkov–Baktieva method, analytical formulas of the critical buckling load of cylindrical shells with arbitrary axisymmetric thickness variation under dynamic external pressure that varies as a power function of time were obtained. Using these analytical formulas, the critical dynamic buckling load of cylindrical shells with linearly and parbolically varying thickness were computed. The influences of thickness variation parameter and loading speed of external pressure on the critical buckling load were also discussed. The method was also applied to cylindrical shells with a classical cosine form thickness variation, by introducing the reduction factor of critical dynamic buckling load. The buckling capacity of these cylindrical shells under dynamic external pressure was discussed considering the effects of loading speed and thickness variation parameter.
Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Zhen Wang,Yang Zhao

DOI: https://doi.org/10.4028/www.scientific.net/amr.163-167.49

2011-01-01

Abstract:Buckling is often the main design consideration for thin cylindrical shells. For most load cases, the stability behavior of the shell is acutely sensitive to circumferential weld-induced imperfections, and the corresponding residual stresses are some beneficial to buckling strength of the shell generally. However, these conclusions are all based on the cylinders with constant wall thickness, and the studies about the effect of residual stresses on buckling strength of tapered cylindrical shells under partial axial compression are few. This paper applies trapezoidal strain field approach to simulate circumferential weld-induced imperfections on tapered cylindrical shellls, and studies the stability behavior of the cylinders with single circumferential weld and multiple circumferential welds under partial axial compression respectively. By comparing the results derived from the models with/without circumferential welds and corresponding residual stresses, the effects of weld depressions and residual stresses on tapered cylindrical shells under partial axial compression are obtained.
NON-LINEAR STABILITY CRITICAL LOADS OF SINGLE-LAYER AND DOUBLE-LAYER RETICULATED SPHERICAL SHALLOW SHELLS BASED ON CONTINUUM ANALOGY METHOD

董石麟,詹伟东

DOI: https://doi.org/10.3969/j.issn.1000-4750.2004.03.002

2004-01-01

Abstract:Continuum analogy method is an important approach for the stability analysis of reticulated shells, but there still exist imperfections in applying this method to reticulated spherical shallow shells. Based on the classical shell theory, single-layer and double-layer reticulated spherical shallow shells were treated as equivalent thin solid shells. Governing equations for the equivalent shells were established based on the non-linear stability theory and then solved by the Ritz method to provide theoretical upper and lower critical loads. Through a major parametric study (more than 1000 numerical examples), theoretical solutions for the critical load coefficients of reticulated spherical shallow shells with normal triangle grids were obtained. Compared with existing solutions, the proposed formulae are more perfect and accurate. Though the finite element technology becomes quite popular today, the continuum analogy method still provides an important guidance to the determination of critical loads of reticulated shells, and is also a supplement to the finite element method in the stability design of reticulated shells.
Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Guowei Cao,Zhiping Chen,Licai Yang,Haigui Fan,Fan Zhou

DOI: https://doi.org/10.1115/1.4027179

2014-01-01

Journal of Pressure Vessel Technology

Abstract:This paper presents an analytical study on the buckling of axially compressed cylindrical shells with arbitrary thickness imperfections (nonaxisymmetric and axisymmetric). First, the basic governing partial differential equations, which consider thickness imperfections, are obtained. Second, a unified method that combines the perturbation method and Fourier series expansion is developed to derive buckling load, radial displacement and stress function, that are expressed by triple series in terms of thickness imperfection parameter and buckling modes up to arbitrary order. Third, two patterns of nonaxisymmetric thickness imperfections, which are modal and exponential, are, respectively, investigated. These results are absolutely new to literature. When modal thickness imperfection becomes axisymmetric, the buckling loads degenerate to the known results. In addition to the analytical investigation, analyses and comparisons are also carried out.
Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

W. -Z. Feng,Z. -P. Chen,P. Jiao,F. Zhou,H. -G. Fan

DOI: https://doi.org/10.1017/jmech.2016.59

IF: 1.455

2016-01-01

Journal of Mechanics

Abstract:This paper presents an analytical study on the buckling of cylindrical shells with arbitrary circumferential thickness variations under external pressure. Firstly, based on the thin shell theory and separation of variables, corresponding ordinary differential equations of laterally pressured cylinders are obtained. Secondly, the general asymptotic formula of buckling load, which is in terms of thickness variation parameter up to arbitrary order, is derived by combining the perturbation method and Fourier series expansion. Thirdly, the effects of uniform and circumferential modal thickness variations on the buckling of cylindrical shells under external pressure are investigated, respectively, and the results agree well with those available in literature. Particularly, the buckling load reduction of cylinders with circumferential modal thickness variation obtained by the proposed method coincides with the numerical results presented by Gusic et al. This analytical method is applicable for evaluating the stability of laterally pressured cylindrical shells with arbitrary circumferential thickness variations, once the thickness variation is known.
Quasi-static Numerical Simulation of Elephant-foot Buckling of Cylindrical Liquid Storage Tanks

GE Song,CHEN Zhi-pin,SHEN Jian-min,JIANG Jia-ling

DOI: https://doi.org/10.3969/j.issn.1001-4837.2006.01.002

2006-01-01

Abstract:The elephant-food buckling(EFB) is one of the main destruction phenomenon of large cylindrical liquid storage tanks during earthquake,which occurs on the shell near the tank base zone.This article uses nonlinear finite-element method,including both geometric and material nonlinearity,when modeling a axisymmetric loaded tank shell model in a typical range of dimension by a quasi-static elastic-plastic buckling approach.The relation of hoop stress and axial stress of the shell is analyzed under axial compressive stress.In addition,it concerns the predominant effect of axial stress leading to collapse.
Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Fan Zhou,Zhiping Chen,Haigui Fan,Song Huang

DOI: https://doi.org/10.1080/15376494.2015.1068401

2016-01-01

Mechanics of Advanced Materials and Structures

Abstract:This article focuses on the buckling of cylindrical shells with stepwise variable thickness subjected to uniform external pressure. First, combining the method of separation of variables, perturbation method, and Fourier series expansion, an analytical method for the buckling analysis of cylindrical shells with axisymmetric thickness variation subjected to external pressure is established. The method is verified by comparing with the previous results. Then, the stepwise variable thickness of cylindrical shells is described exactly by the arc tangent function. Finally, using the presented method, a general formula for the critical buckling load of cylindrical shells with stepwise variable thickness subjected to uniform external pressure is derived. This general formula is compared and discussed with some empirical formulae in the current design standards. This study lays a theoretical foundation for the calculation of the buckling load of cylindrical shells with stepwise variable thickness subjected to uniform external pressure. Moreover, it provides a reference and guidance for the further revision of related standards.
Torsional Buckling Analysis of Composite Anisogrid Conical Shells: Theoretical Approach and Numerical Validation

Hougai Shi,Hualin Fan

DOI: https://doi.org/10.1142/s0219455424501839

IF: 2.9568

2024-01-01

International Journal of Structural Stability and Dynamics

Abstract:Torsional buckling analysis of composite anisogrid conical shells, with equiangular helical ribs, was investigated based on an equivalent variable stiffness continuum model. The buckling analysis is complicated by the variable geometry and stiffness of the lattice conical shell along the meridian. The smearing approach and the gradual function of the lattice cells were used to build the corresponding continuum model with varying stiffnesses. Recurrence relations were constructed from linearized buckling equations of the equivalent conical shell using the power series method and Fourier decomposition. The excellent precision and tremendous efficiency of the analytical solution was validated compared with numerical results through many design parameters of the lattice conical shell, such as the thickness of the ribs, the radius at the small end, and the height of the cone. Finally, a parametric analysis was used to discuss the influence of parameters on the critical buckling torsional moment. It is found that increasing rib thickness, end radius, the height of the cone, and strengthening boundary constraints can improve the critical buckling torsional moment.
Buckling of Cylindrical Shells with Measured Settlement under Axial Compression

Zhiping Chen,Haigui Fan,Jian Cheng,Peng Jiao,Feng Xu,Chenchao Zheng

DOI: https://doi.org/10.1016/j.tws.2017.11.006

IF: 5.881

2018-01-01

Thin-Walled Structures

Abstract:Buckling behavior of cylindrical shells with measured settlement under axial compression has been researched and analyzed in this paper. Using the method of Fourier series expansion, the measured settlement data is transformed into differential settlement. Applying the finite element simulation method, the differential settlement is applied to bottom of the cylindrical shell in order to simulate behavior of the cylindrical shell under differential settlement. Based on the deformed cylindrical shell caused by settlement, the finite element simulation method is applied to research buckling behavior of the cylindrical shell under axial compression considering the geometric nonlinearity and large deformation. The meridional membrane stress distribution in the circumferential direction of the cylindrical shell under differential settlement is obtained and compared with the differential settlement distribution. Effects of liquid storage on buckling behavior of the cylindrical shell are researched by applying hydrostatic pressure to the inner surface. Parametric analysis is carried out to research the effects of diameter-thickness ratio and height-diameter ratio of the cylindrical shell on the axial buckling capability. Results show that the cylindrical shell will be subjected to deformation and meridional membrane stress because of the differential settlement and the critical axial buckling load will be decreased then. Liquid storage is helpful for the cylindrical shell to remain stable. The cylindrical shell with larger height-diameter ratio and smaller diameter-thickness ratio is more capable to resist buckling under axial compression following differential settlement.
Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

He Ma,Zhiping Chen,Peng Jiao,Xinyi Lin

DOI: https://doi.org/10.1115/pvp2022-84396

2022-01-01

Abstract:Thin-walled cylindrical shell structures are widely used in various engineering fields due to their highly efficient load carrying capacity. This kind of structures is prone to buckling failure when subjected to axial compression loads. Machining the shell into corrugated shape is an effective method to prevent buckling. Rational design of corrugated shells can improve the load carrying efficiency of shell structures. However, there are few studies focused on the effects of various parameters on the longitudinal corrugated cylindrical shell buckling. In this paper, numerical studies are performed to analyze the factors affecting the buckling behaviors of thin-walled longitudinal corrugated cylindrical shells under axial compression loads. The cross section of the corrugated shell is obtained by superposing the sine curve on the reference circle. The critical buckling load, buckling mode and imperfection sensitivity of the longitudinal corrugated cylindrical shells are examined and compared with ordinary cylindrical shells. The effects of shell dimensions and material yield strength are taken into account. In addition, the influence of cross section shape parameters on the critical buckling load is considered, including the amplitude A and wave number k. Results show that the axial load carrying capacity of longitudinal corrugated cylindrical shells is better than ordinary cylindrical shells, and rational design of cross section shape can enhance the stability of corrugated shells. This work can provide some reference for relevant experimental studies. Furthermore, it can also give some guides for the application of thin-walled longitudinal corrugated cylindrical shells in actual engineering.
Dynamic Buckling Analyses of Functionally Graded Carbon Nanotubes Reinforced Composite (FG-CNTRC) Cylindrical Shell under Axial Power-Law Time-Varying Displacement Load

Peng Jiao,Zhiping Chen,You Li,He Ma,Jihang Wu

DOI: https://doi.org/10.1016/j.compstruct.2019.04.048

IF: 6.3

2019-01-01

Composite Structures

Abstract:In this paper, a semi-analytical approach is proposed to investigate the dynamic buckling behavior of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) cylindrical shell under dynamic displacement load. Five types of carbon nanotubes (CNTs) distribution are considered, in which the uncertainty of CNTs distribution is also taken into account. Combining with the first-order shear deformation theory and von-Kármán strains, the nonlinear governing equations for dynamic buckling analysis of FG-CNTRC cylindrical shell considering the thermal effects are derived. Then, Galerkin method and the fourth-order Runge-Kutta method are employed to solve the governing equations. And the dynamic critical buckling condition of FG-CNTRC cylindrical shell is determined by the Budiansky-Roth criterion. Compared with the published literatures, the feasibility and accuracy of proposed analysis approach are validated. Finally, the parametric studies are systematically carried out to analyze the effects of CNTs distribution type, CNTs volume fractions, the uncertainty of CNTs distribution, the loading rate and form of dynamic displacement load, structural characteristics and temperature on the dynamic buckling behavior of FG-CNTRC cylindrical shell.
Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Peng Jiao,Zhiping Chen,He Ma,Hao Miao,Haiyang Ou

DOI: https://doi.org/10.1142/s0219455423501973

2023-01-01

Abstract:In practical engineering, a thin-walled cylindrical shell structure is more easily subjected to localized axial compression loads caused by external adjacent structures or devices. However, until now there are few studies to reveal the buckling behavior of cylindrical shells under such nonuniform loading conditions based on initial imperfection sensitivity. Therefore, buckling analysis of cylindrical shell under localized axial compression loads is investigated in this paper. Based on the buckling test, the influence of the morphology and amplitude of measured initial geometric imperfection are studied using the finite element method. Meanwhile, the inherent reason for initial geometric imperfection affecting the buckling load is elaborated. The influence of amplitude, distribution range, and different combinations of local dent imperfections are also elucidated. In addition, the effects of inclined loading imperfection and uneven shell thickness distribution imperfection are analyzed in the form of deterministic numerical simulation. Finally, a new buckling load knockdown factor that can reasonably consider the influence of loading imperfection and shell thickness variation imperfection is proposed. This work elucidates the initial imperfection sensitivity of the thin-walled cylindrical shell structures under localized axial compression load and can provide useful guidance for the buckling design and preventing buckling failure of these structures.
Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

WAN Fu-teng,CHEN Zhi-ping,JIAO Peng,XU Feng,TANG Xiao-yu,SU Wen-qiang

DOI: https://doi.org/10.3969/j.issn.1001-4837.2017.03.001

2017-01-01

Abstract:A buckling experimental investigation on the behavior of 3 cylindrical shells subjected to axial pressure was carried out.Through experimental investigation,the buckling critical loads and deformation were obtained.Based on the experimental results,three different nonlinear numerical calculation methods,including Riks method,nonlinear static method and explicit dynamic method,were compared.The numerical calculation results show that the nonlinear static method and experimental results are in good agreement when taking the initial imperfection into account.This method can relatively accurately calculate the axial buckling critical load with lower than 6.0％ error and shows consistent deformation with experimental results.Experimental results indicate that due to the initial imperfection the axial critical buckling load was reduced largely and the experimental value of buckling loads is only about 42％ of the theoretical value.
Parametric instability of a rotating truncated conical shell subjected to periodic axial loads

Han Qinkai,Chu Fulei

DOI: https://doi.org/10.1016/j.mechrescom.2013.08.005

IF: 2.749

2013-01-01

Mechanics Research Communications

Abstract:Parametric instability of a rotating truncated conical shell subjected to periodic axial loads is studied in the paper. Through deriving accurate expressions of inertial force and initial hoop tension, a rotating conical shell model is presented based upon the Love's thin shell theory. Considering the periodic axial loads, equations of motion of the system with periodic stiffness coefficients are obtained utilizing the generalized differential quadrature (GDQ) method. Hill's method is introduced for parametric instability analysis. Primary instability regions for various natural modes are computed. Effects of rotational speed, constant axial load, cone angle and other geometrical parameters on the location and width of various instability regions are examined. © 2013 Elsevier Ltd.
Free and Forced Vibration Analysis of Uniform and Stepped Conical Shell Based on Jacobi–Ritz Time Domain Semi-Analytical Method

Jiajun Zheng,Cong Gao,Fuzhen Pang,Yang Tang,Zhe Zhao,Haichao Li,Yuan Du

DOI: https://doi.org/10.1142/s0219455425501809

IF: 2.9568

2024-07-26

International Journal of Structural Stability and Dynamics

Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. Under arbitrary boundary conditions, a Jacobi–Ritz time domain semi-analytical method is proposed to study the vibration behaviors of uniform and stepped conical shells. Based on the idea of the differential element method and the first-order shear deformation theory (FSDT), the vibration analysis models of uniform and stepped conical shell structures are established. The axial and circumferential displacement tolerance functions are expressed by the Jacobi polynomial and the Fourier series. The complex boundary conditions are simulated by using artificial spring technology. In light of the Ritz method and the Newmark-[math] integral method, the free and forced vibration results of the structure can be figured out in the time domain. The numerical results demonstrate that the proposed method has excellent accuracy and remarkable dependability when compared to the finite element method (FEM). Numerical examples are used to examine the forced and free vibration behaviors under various boundary conditions, semi-vertex angles, thicknesses, and load characteristics.

engineering, mechanical,mechanics, civil

Dynamic buckling of conical shell subjected to impulsive cosine load

Analysis of Internal Force and Stability of Hyperbolic-Inverted Conical Reticulated Shell Structure

A Semi-Analytical Method for the Dynamic Analysis of Cylindrical Shells with Arbitrary Boundaries

Buckling of a conical thin shell with variable thickness under a dynamic loading

Nonlinear Dynamic Analysis of Shells Using Finite Particle Method

Analytical Research on Dynamic Buckling of Thin Cylindrical Shells with Thickness Variation under Axial Pressure

Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

NON-LINEAR STABILITY CRITICAL LOADS OF SINGLE-LAYER AND DOUBLE-LAYER RETICULATED SPHERICAL SHALLOW SHELLS BASED ON CONTINUUM ANALOGY METHOD

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Quasi-static Numerical Simulation of Elephant-foot Buckling of Cylindrical Liquid Storage Tanks

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Torsional Buckling Analysis of Composite Anisogrid Conical Shells: Theoretical Approach and Numerical Validation

Buckling of Cylindrical Shells with Measured Settlement under Axial Compression

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads

Dynamic Buckling Analyses of Functionally Graded Carbon Nanotubes Reinforced Composite (FG-CNTRC) Cylindrical Shell under Axial Power-Law Time-Varying Displacement Load

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Parametric instability of a rotating truncated conical shell subjected to periodic axial loads

Free and Forced Vibration Analysis of Uniform and Stepped Conical Shell Based on Jacobi–Ritz Time Domain Semi-Analytical Method