Measurement Of The Convective Heat Transfer Coefficient For Narrow Pore Size Distribution Polypropylene Flat Sheet Membrane Module By Vacuum Membrane Distillation

Na Tang,Kaiyong Zhang,Jinjin Li,Xuekui Wang,Zuoliang Sha

DOI: https://doi.org/10.3303/CET0917278

2009-01-01

Abstract:Membrane distillation (MD) is one of a membrane separation processes which can be used in the field such as seawater and brine desalination, waste water purification, fruit juice condensed, removing volatile components from dilute aqueous solutions and so on. PP is a novel MD material due to its hydrophobicity, thermal and chemical stability, good mechanical properties and low cost. The membrane structures, with a gradation in pore size but narrow pore size distribution, are desirable for MD application. The aim of this work is to develop the convective heat transfer coefficient of the PP hydrophobic microporous membranes prepared via thermally induced phase separation (TIPS) method, which is important for developing the MD performance for this membrane. In this work, the convective heat transfer coefficient for narrow pore size distribution iPP flat sheet membrane module was measured using pure water experimental results. Both Poiseuille flow and Knudsen diffusion were considered to develop the heat transfer and mass transfer mathematical models of pure water VMD process, temperature polarization coefficient was used to measure the boundary layer resistances which is relative to the total heat transfer resistance of the system. The mass transfer model of pure water was developed basing on dusty-gas model (DGM). C++ Language programming was used to investigate the temperature of the liquid-vapor interface of the feed, and the parameters of Dittus-Boelter equation were regressed using the pure water experimental results. The turbulence heat transfer coefficient of the iPP flat sheet membrane module was: Nu = 0.0236Re(0.8)Pr(0.378).