Abstract:In order to analyze the fracture problems of composite materials with complex interfaces, such as particle reinforced composite materials (PRCMs), we developed a new interaction integral method by which the stress intensity factors (SIFs) can be solved using an integral domain with arbitrarily complex interfaces.The interaction (energy) integral method([1])) was derived from the J-integral by considering a composition of two admissible states (the actual and auxiliary fields) to obtain mode I and mode II SIFs separately for homogeneous materials. Subsequently, the interaction integral method was successfully used to solve the crack problems in functionally graded materials (FGMs)([2]). Generally, the contour integral should be converted into an equivalent domain integral in numerical computations. Since divergence theorem can not be used in a domain with material interfaces, the material properties in the integral domain are assumed to be continuous in previous studies.In the authors' work([3]), the interaction integral was studied when the integral domain contains material interfaces. As shown in Figure I. the interaction integral is defined asl = lim(r -> 0)integral(Gamma)[1/2(sigma(aux)(jk) epsilon(jk) + sigma(jk)epsilon(aux)(jk))delta(li) - (sigma(aux)(ij) u(j.1) + sigma(ij)u(j.1)(aux))]n(i)d Gamma (1)Since the integral domain is divided by Gamma(interface) into two domain A(1) and A(2), the interaction integral should be written asI = lim(r -> 0) closed integral(partial derivative A1) + closed integral(partial derivative A2) [sigma(aux)(ij) u(j.1) + sigma(ij)u(j.1)(aux) - +1/2(sigma(aux)(ij) epsilon(jk) + sigma(ij) epsilon(aux)(jk))delta(li))m(i)q]d Gamma + l (2)where l* is a line integral along the interface and it can be proved that l* = 0. Then, applying divergence theorem in A(1) and A(2), we can obtained that I = integral(A) (sigma(aux)(if) u(j.1) + sigma(ij)u(j.1)(aux) -sigma(aux)(ik)epsilon(jk)delta(li))q(j)dA+integral(Alpha)sigma(ij)[S-ijkl(tip) - S-ijkl (x)]sigma(aux)(krl)qdA (3)Compared with the J-integral and the traditional interaction integral, the present interaction integral has two advantages. I) It does not involve any derivatives of material properties. Therefore, the interaction integral does not need the material properties to be differentiable. Since it may be difficult to obtain the derivatives of material properties or there are no derivatives in many actual cases. 2) The validity of the present interaction integral method is not affected by material interfaces in the integral domain. Namely, the present method does not require the material to be continuous and hence, it can be used to compute the Sit's of the composite material with complex interfaces effectively.For the interface crack problems and the three-dimensional crack problems in the composite materials with complex interfaces, the interaction integral method with the above two advantages have been obtained([4, 5]). Moreover, the method can deal with curved interface crack problems effectively. On account of these advantages, the interaction integral method has become a very promising technique in the fracture analysis of the composite materials with complex interfaces.

Analytical-variational and Generalized Weighted Conservative Integral Method on Solution of Interfacial Cracks with Their Applications to Bi-Metal Glued Joints

Solution of analytical-variational method on bi-material interface crack and its comparison with experiment

Analysis of bi-material interface cracks with complex weighting functions and non-standard quadrature

Analytical-generalized variational method of solution for delamination of bi-metal glued joints

An interaction integral method for 3D curved cracks in nonhomogeneous materials with complex interfaces

Interaction integral method for the interfacial fracture problems of two nonhomogeneous materials

Investigation of Stress Intensity Factors for an Interface Crack in Multi-Interface Materials Using an Interaction Integral Method

Fracture Mechanics of Composite Materials with Complex Interfaces

A New Path-Independent Interaction Integral for the SIFs of Interfacial Crack

A New Domain-Independent Interaction Integral for an Interface Crack Subjected to Thermal Loading

Contour Integral Approaches for the Evaluation of Stress Intensity Factors Using Displacement Discontinuity Method

A Symplectic Analytical Singular Element for the Inclined Crack Terminating at the Material Interface of Composite Structures

An Interface Crack for a Functionally Graded Strip Sandwiched Between Two Homogeneous Layers of Finite Thickness

A Modified Semi-Weight Function Method for Stress Intensity Factor Calculation of a Vertical Crack Terminating at the Interface

WEIGHT FUNCTIONS FOR INTERFACE CRACKS IN DISSIMILAR ANISOTROPIC MATERIALS

Interaction Between an Interface and Cracks

A modified semi-weight function method for SIF calculation of arbitrary inclined interface crack with both single complex-root and double real-root singularities

INTERFACIAL CRACK ANALYSIS IN THREE-DIMENSIONAL TRANSVERSELY ISOTROPIC BI-MATERIALS BY BOUNDARY INTEGRAL EQUATION METHOD

Interfacial Crack Analysis Between Dissimilar Viscoelastic Media Using Symplectic Analytical Singular Element

An interaction integral method coupled with special crack tip elements for evaluation of stress intensity factors

J-Integral Evaluation for Interface Crack of Bimetal Loaded by Normal Three-Point Bending(Modeling & Simulation)