Abstract:Applied-field magnetoplasmadynamic thrusters (AF-MPD thrusters) are hybrid accelerators in which electromagnetic and gas dynamic processes accelerate plasma to high speed; they have considerable potential for future space applications with the significant advantages of high specific impulse and thrust density. In this paper, we present a series of protocols for designing and manufacturing a 100 kW class of AF-MPD thruster with water-cooling structures, a 130 V maximum discharge voltage, a 800 A maximum discharge current, and a 0.25 T maximum strength of magnetic field. A hollow tantalum tungsten cathode acts as the only propellant inlet to inhibit the radial discharge, and it is positioned axially at the rear of the anode in order to relieve anode starvation. A cylindrical divergent copper anode is employed to decrease anode power deposition, where the length has been reduced to decrease the wall-plasma connecting area. Experiments utilized a vacuum system that can achieve a working vacuum of 0.01 Pa for a total propellant mass flow rate lower than 40 mg/s and a target thrust stand. The thruster tests were carried out to measure the effects of the working parameters such as propellant flow rates, the discharge current, and the strength of applied magnetic field on the performance and to allow appropriate analysis. The thruster could be operated continuously for significant periods of time with little erosion on the hollow cathode surface. The maximum power of the thruster is 100 kW, and the performance of this water-cooled configuration is comparable with that of thrusters reported in the literature.

Progress of the MHD Ship Propulsion Project in China

Superconducting MHD helical channel experimental ship "HEMS-1"

Superconducting Nied Helical Channel Experimental Ship "Hems-1"

Study on the Performance of a 300W Counter-Rotating Type Horizontal Axis Tidal Turbine

The design and application of a new vertical-axis ship propeller

Numerical Study of Hydrodynamic Performance of A High Maneuverability Ocean Engineering Ship with Pod Propeller Design

Design and Performance Analysis of a 2.5 MW-Class HTS Synchronous Motor for Ship Propulsion

Numerical analysis of 40 MW HTS motor electromagnetic characteristics for ship electric propulsion

Development and Experiment of A 60 Kw Horizontal-Axis Marine Current Power System

Current Status and Future Prospects of High-Temperature Superconducting Rotating Machine Technology for Ships -Ship Propulsion Motor to Marine Current Generator-

Investigation of the Performance of a Stand-Alone Horizontal Axis Tidal Current Turbine Based on in Situ Experiment

Integrated study on the comprehensive magnetic-field configuration performance in the 150 kW superconducting magnetoplasmadynamic thruster

Design and Test of 1/5th Scale Horizontal Axis Tidal Current Turbine

Design and Tests of a Marine Current Turbine in Low Flow Velocity

Propulsion performance of large-scale ship model in real sea environment

Integrated Design and Implementation of 120-Kw Horizontal-Axis Tidal Current Energy Conversion System

An introduction to the design and fabrication progress of a megawatt class 2G HTS motor for the ship propulsion application

Design and Test of a 600-Kw Horizontal-Axis Tidal Current Turbine

A 100 KW Class Applied-field Magnetoplasmadynamic Thruster

Dynamic Simulation of A Superconducting Augmented Linear Propulsion System

A 25 Kw Stand-alone Horizontal Axis Tidal Current Turbine