Abstract:The objective of this study was to investigate the mechanical properties (% elongation and puncture strength) of poly(D,L-lactide) (PLA) and poly(D,L-lactide-co-glycolide) (PLGA) films as a function of exposure time to an aqueous medium and to correlate the mechanical properties to the degradation/erosion of the polymer as a function of the type of polymer [PLA, weight-average molecular weight (M(W)) 270,300, or PLGA 50:50, M(W) 56,500], the type of plasticizer [(triethyl citrate (TEC) or acetyltributyl citrate (ATBC)], and the exposure time to pH 7.4 phosphate buffer. The glass transition temperature of the films was measured by differential scanning calorimetry (DSC), the molecular weight by size exclusion chromatography (SEC), and the polymer erosion and hydration gravimetrically. The mechanical properties were strongly affected by the type of polymer and plasticizer. PLGA films showed a faster loss of mechanical integrity. TEC, the water-soluble plasticizer, leached from the films, resulting in major differences in the mechanical properties (flexibility) when compared with films plasticized with the more permanent, water-insoluble ATBC. A significant difference in M(W) decrease was seen between plasticizer-free and plasticizer-containing PLA films, but not for PLGA films. Plasticized PLA films, which were above their glass transition temperature in the rubbery state, showed a faster decrease in M(W) than plasticizer-free PLA ones, which were in the glassy state. The plasticizer addition to the lower M(W) PLGA did not enhance the polymer degradation; the plasticizer-free PLGA was already in the rubbery state. Major differences between the two polymers were also seen in the mass loss and the water uptake studies. After 4 weeks, the mass loss was between 2.6 and 7.0% and the water uptake between 10.1 and 21.1% for PLA films, whereas for PLGA films, the mass loss was between 40.3 and 51.3% and the water uptake between 221.9 and 350.6%. 2000 Wiley-Liss, Inc.

Degradation of Porous Poly(D,L-Lactic-Co-Glycolic Acid) Films Based on Water Diffusion

Controllable Poly(L-lactic Acid) Soft Film with Respirability and Its Effect on Strawberry Preservation

Biodegradation of Polyelectrolyte Complex Films Composed of Chitosan and Sodium Cellulose Sulfate As the Controllable Release Carrier

Physicomechanical properties of biodegradable poly(D,L-lactide) and poly(D,L-lactide-co-glycolide) films in the dry and wet states

Preparation, Characterization and Degradation Characteristics of Polyanhydrides Containing Poly(Ethylene Glycol)

Degradation Behaviors of Polylactic Acid, Polyglycolic Acid, and Their Copolymer Films in Simulated Marine Environments

DEGRADATION STUDY OF POLY(LACTIC ACID) POROUS SCAFFOLD AT DIFFERENT TEMPERATURES

In vitro and in vivo degradation of poly(L: -lactide-co-glycolide) films and scaffolds

Enzyme-catalyzed Degradation Behavior of L-Lactide/trimethylene Carbonate/glycolide Terpolymers and Their Composites with Poly(l-Lactide-co-glycolide) Fibers

Effect of poly(lactic-co-glycolic acid) blend ratios on the hydrolytic degradation of poly(para-dioxanone)

The effect of chemical composition on the degradation kinetics of high molecular weight poly(trimethylene carbonate-co-L-lactide)

Effect Of Segment Structures On The Hydrolytic Degradation Behaviors Of Totally Degradable Poly(L-Lactic Acid)-Based Copolymers

Structure And Morphology Changes In Absorbable Poly(Glycolide) And Poly(Glycolide-Co-Lactide) During In Vitro Degradation

In Vitro Degradation and Controlled Release Behavior of D,L-PLGA50 and PCL-b-D,L-PLGA50 Copolymer Microspheres.

Effects of Porosity and Pore Size on in Vitro Degradation of Three-Dimensional Porous Poly(d,l-Lactide-co-glycolide) Scaffolds for Tissue Engineering.

In Vitro Degradation Behavior of L-Lactide/Trimethylene Carbonate/Glycolide Terpolymers and A Composite with Poly(L-Lactide-Co-Glycolide) Fibers

On the Development of Polylactic Acid/Polycaprolactone Blended Films with High Retention Capacity

Enzyme-catalyzed Degradation of Poly(l-Lactide)/poly(ɛ-caprolactone) Diblock, Triblock and Four-Armed Copolymers

Formation and Degradation of Poly(d,l-Lactide) Nanoparticles and Their Potential Application As Controllable Releasing Devices.

Effect of biaxial stretching on the microstructure evolution, optical, mechanical and oxygen barrier properties of biodegradable poly(lactic acid) (PLA)/poly(butylene adipate- co -terephthalate) (PBAT) films

Hydrolytic degradation and biodegradation of polylactic acid electrospun fibers