Abstract:Presented in this study is investigation of dynamic behavior of a helical gear reduction by experimental and numerical methods. A closed-loop test rig is designed to measure vibrations of the example system, and the basic principle as well as relevant signal processing method is introduced. A hybrid user-defined element model is established to predict relative vibration acceleration at the gear mesh in a direction normal to contact surfaces. The other two numerical models are also constructed by lumped mass method and contact FEM to compare with the previous model in terms of dynamic responses of the system. First, the experiment data demonstrate that the loaded transmission error calculated by LTCA method is generally acceptable and that the assumption ignoring the tooth backlash is valid under the conditions of large loads. Second, under the common operating conditions, the system vibrations obtained by the experimental and numerical methods primarily occur at the first fourth-order meshing frequencies and that the maximum vibration amplitude, for each method, appears on the fourth-order meshing frequency. Moreover, root-mean-square (RMS) value of the acceleration increases with the increasing loads. Finally, according to the comparison of the simulation results, the variation tendencies of the RMS value along with input rotational speed agree well and that the frequencies where the resonances occur keep coincident generally. With summaries of merit and demerit, application of each numerical method is suggested for dynamic analysis of cylindrical gear system, which aids designers for desirable dynamic behavior of the system and better solutions to engineering problems.

Modified Closed-Form Numerical Algorithm for Periodic Vibration Response of Mechanical Transmissions

Semi-analytical Vibration Analysis of FGM Cylindrical Shells Surrounded by Elastic Foundations in a Thermal Environment

Dynamic analysis of a helical gear reduction by experimental and numerical methods

Nonlinear Dynamic Simulation Of Coupled Lateral-Torsional Vibrations Of A Gear Transmission System

Vibration and noise analysis of gear transmission system

An Improved Model for Dynamic Analysis of a Double-Helical Gear Reduction Unit by Hybrid User-Defined Elements: Experimental and Numerical Validation

A Novel Method for Vibration Signal Transmission and Attenuation Analysis in Complex Planetary Gearboxes

Study On The Nonlinear Vibration Character Of The Spiral Bevel And Hypoid Gears Transmission System

Coupled nonlinear vibration analysis of a multi-stage gear transmission system

A Numerical Method for Calculating the Misalignments of Planetary Gears

Study on Nonlinear Vibration Characteristics of Spiral Bevel Transmission System

Numerical Modeling and Dynamic Characteristics Study of Coupling Vibration of Multistage Face Gearsplanetary Transmission

Novel Calculation Method for Dynamic Excitation of Modified Double-Helical Gear Transmission

Finite Element Analysis of Dynamic Response and Structure Borne Noise of Gearbox

A Frequency Domain Finite Element Approach for Three-Dimensional Gear Dynamics

Numerical Simulation And Experimental Research On The Vibration, Shock And Noise Of Gear System

An Efficient Modeling Method For Coupled Vibration Analysis Of Double-Helical Gear Reduction

Nonlinear Vibration Analysis of the Coupled Gear-Rotor-Bearing Transmission System for a New Energy Vehicle

Numerical Simulation of Dynamic Characteristic and Reliability for Internal Gear Transmission Mechanism

Dynamic Model and Numerical Simulation of Multi-stage gear-rotor-bearing System

Modeling and Simulation of Gear System based on the Nonlinear Clearance